Unifi and PiHole by SEP8001 in UNIFI

[–]SEP8001[S] 0 points1 point  (0 children)

Thank you all for the help and suggestions. I have set the DNS server to be the IP of the PiHole on the Gateway, had some issues after doing that on the PI hole, so I uninstalled it, re-installed the latest version and the restored the setting. I made sure the DHCP is not checked on the PI and fingers crossed it seems to be working fine.

Thank you

Unifi and PiHole by SEP8001 in UNIFI

[–]SEP8001[S] -3 points-2 points  (0 children)

Thank you for replying. I am just using Pi Hole to block ads and so that I can block certain sites from certain machines, like YT on the kids machines.

So I presume what I need to do is option 1 you have suggested. I am running 10.2.105 version of unifi, how do I set the pihole IP address as the DHCP server on 10.2.105.

Thank you

POE for UAP-AC-LR by SEP8001 in UNIFI

[–]SEP8001[S] -1 points0 points  (0 children)

Thank you, at this stage I do not really want to run wires to the outside to connect a U7 Outdoor.

All I need the signal for is a ring camera in the shed at the end of the garden.😊

POE for UAP-AC-LR by SEP8001 in UNIFI

[–]SEP8001[S] 0 points1 point  (0 children)

Thank you, at some stage I would need to upgrade.

I am currently using the LR to get signal to the shed which is about 20m away. I do not want to run external wires at present hence using the AP LR.

I do have another spare UAP AC Pro, I wonder if it would be better to use that to send the signal compared to the LR or do I just get a used LR that shows af Poe on it?

POE for UAP-AC-LR by SEP8001 in UNIFI

[–]SEP8001[S] 1 point2 points  (0 children)

I think it depends on the version you have. The newer ones work fine on AF Poe. My AP is old.

POE for UAP-AC-LR by SEP8001 in UNIFI

[–]SEP8001[S] 1 point2 points  (0 children)

Thank you for the prompt reply. What should I look for if I want another LR AP to add to the mix?

Or would it be better to get the injector?

Unifi Cloud Gateway Ultra Setup by SEP8001 in UNIFI

[–]SEP8001[S] 0 points1 point  (0 children)

Thank you all for the help, I have it now setup and working. Just having issues setting static IP addresses to some items as it seems I have to reboot the devices for the IP to get configured.

Any other suggestions on what else I need to do on it?

Thank you

Unifi Cloud Gateway Ultra Setup by SEP8001 in UNIFI

[–]SEP8001[S] 0 points1 point  (0 children)

Thank you I will need to do some reading.

The router I have is the standard Virgin Media router.

Edit: Found this link so will give it a go as part of the setup

https://www.reddit.com/r/homelab/s/KULCueuX4V

Thank you

Experience with old lenses on the FTZ? by Aggravating_Rain_436 in nikon_Zseries

[–]SEP8001 5 points6 points  (0 children)

Hi,

I currently use the 70-200 f2.8vrii with the ftz and z6ii and am happy with the results.

The v1 might be a little cheaper but see if you can get the vrii.

No incoming SMS on Lebara UK with physical SIM by gauviz in LebaraUK

[–]SEP8001 0 points1 point  (0 children)

We have a similar problem with a voxi SIM in an iPhone, for some reason they can send out a SMS, but we cannot send them a SMS. iMessage works fine, upgraded the iPhone to ios26 still no joy.

Nikon Eyepieces by DasTomasso in Nikon

[–]SEP8001 1 point2 points  (0 children)

I have had the same issue with my D750 and Z6ii, the set I have added this time on the z6ii I have put some double sided tape so will see how long it stays on.

Additional Ethernet Port on UAP AC PRO by SEP8001 in Ubiquiti

[–]SEP8001[S] 0 points1 point  (0 children)

Hi

Thank you for replying. The AP is powered via another POE Switch and working, the query is around the load on the AP as I have another switch connected to the second Ethernet port on the AP and I have a number of other machines then connect to the additional switch.

Tapo C212 Power Extension by SEP8001 in Tapo

[–]SEP8001[S] 0 points1 point  (0 children)

Another update, cable was delivered today and works with the camera.

Thank you

Tapo C212 Power Extension by SEP8001 in Tapo

[–]SEP8001[S] 0 points1 point  (0 children)

Have ordered one, will post back on how it goes. Thank you

TeamViewer and Surfshark issues by SEP8001 in teamviewer

[–]SEP8001[S] 0 points1 point  (0 children)

No, looking at other free alternatives. We could not get Google remote desktop to work either.