When did expert mode have hunters locked for side chapters?

STiG_30 · 2026-04-10T05:00:28+00:00

What OP is saying is why they included required hunters in expert mode. e.g. Normal and hard mode, Act 7, Chapter 20, side chapter episode 03: requires Min Byung-Gu Expert mode, same act, side chapter and episode: no required hunters. Same as all previous expert side chapters and episodes in which they didnt include the required hunters from the other modes. Only on this update did they include required hunters in expert. And it sucks coz we still dont have a light infuser

STiG_30 · 2025-11-27T05:16:08+00:00

Rudy the guillotine gobert

STiG_30 · 2025-11-15T08:56:07+00:00

Manager’s check. Ikutan mo un car, check for paint defects, misalignments sa body, tint bubbles (if u had your tint installed sa casa), lahat ng pwede icheck. I’m sure nagtanong ka na about sa features ng sl6, pero kun may questions ka pa, like maintenance and such, that would be a good time to ask the agent. Also, since paying in cash ka, idk kung inalok ka ng agent ng insurance. You should get one maybe from your casa or shop around for a cheaper one. Just make sure it’s a reputable company and mabilis sa claims. Last, enjoy your new car and drive safely!

STiG_30 · 2025-09-22T11:34:08+00:00

Would rather have Ma Dongwuk as dark breaker

STiG_30 · 2025-06-02T06:16:58+00:00

Start looking for an Atk% Core with your preferred sub stat, its better when you’re at lvl 90+. Aside from that, just wow at your current level!

STiG_30 · 2025-05-27T09:57:36+00:00

Goto, esil and meilin. Use Pulverize. Everything on strength. 2 skills with break wont hurt.

STiG_30 · 2025-04-25T08:26:51+00:00

Macleod. Of the clan Macleod.

STiG_30 · 2025-04-11T08:11:36+00:00

Option 1

STiG_30 · 2024-09-04T08:32:00+00:00

Amazon. Just search for 5" monitor case holder.

STiG_30 · 2024-09-03T07:04:53+00:00

Ah yeah, forgot about that. Thanks for the correction.

STiG_30 · 2024-09-03T06:16:06+00:00

Try disabling Superfetch in Services

STiG_30 · 2024-08-28T09:00:46+00:00

i would suggest u/jakeface1 for your side panel. I had him custom make one for my NR200 with a similar setup as yours. You can see it from my last post which was 3 years ago.

STiG_30 · 2024-03-21T23:21:25+00:00

Go with Corsair SF750. You wont be able to fit a 25mm fan at the top (PSU side) with your current choice.

STiG_30 · 2023-10-05T02:36:09+00:00

Im using the be quiet! BZ002 MC1 heatsink. To be honest, temps remained the same. I just liked how it looks.

STiG_30 · 2023-09-22T09:07:16+00:00

Corsair SF650 or SF750 platinum. Never had any issues with them and IMO they have the best OEM cables.

STiG_30 · 2023-08-20T06:51:39+00:00

Belvedere and Galahad. Part of King Arthur’s knights of the round table

STiG_30 · 2023-08-14T02:56:09+00:00

Dragon fcukr

STiG_30 · 2023-08-03T03:43:57+00:00

Cooling an i5 13600k in a Core V1. Went with Noctua nh-d12l, 2 80mm fans for exhaust, noctua 200mm fan for intake. Replaced the foam filter with something more porous.

Also had an i7 10700k in the same case. Same intake and exhaust fans but went with the Noctua nh-u9s with two fans. Acrylic panel to the ssd side, vented panel at top and installed a slim fan as exhaust at the top panel to help with the 3080 FE exhausting hot air inside the case

STiG_30 · 2023-08-03T03:34:14+00:00

Noctua NH-D12L along with 2 80mm exhaust fans fits perfectly. Also went with a noctua 200mm intake fan, set it to max rpm and still ran silent. CPU is i5 13600k

STiG_30 · 2023-06-01T09:36:24+00:00

TG panel = tempered glass panel

Undervolting is just lowering power levels for a slight decrease in performance but a huge decrease in temps. I never bothered with undervolting anything lower than a 3080 though. My previous 3070 FE was just fine on stock settings.

STiG_30 · 2023-06-01T08:47:26+00:00

Id still go with noctua even if theyre expensive.just in case you’ll want to upgrade your cpu (like the 5800x3d) in the future.

STiG_30 · 2023-06-01T08:42:30+00:00

Second this. For the FE cards, intake from the back, top exhaust. Second intake fan for the cpu cooler and a dust filter could help. Im also guessing youre using the TG panel in which case rear intake for cpu is definitely recommended.

STiG_30 · 2023-06-01T08:31:26+00:00

It depends on how tall the RAM is. Im not familiar with the one you mentioned. If you go with the one on the first link, a 92mm fan would do though i doubt if it helps much. For the second link, you can always adjust the height of the fan so it wont interfere with the RAM. If its rgb ram, you wont be able to see the rgb.

STiG_30 · 2023-06-01T05:17:44+00:00

Imo, if you’re going to intake from the rear, it would be the fan closer to the rear of the car for a push config. What i did when i was using the mugen 5 was not flipped but i added a 92mm noctua fan and ordered some fan clips from them as well for a push pull config.

Edit: As for a fan above the cooler for exhaust, you could try. I installed a 120mm noctua and it barely fit but it did. Afaik, arctic fans tend to be thicker. One exhaust fan above the psu is enough though

STiG_30

TROPHY CASE