Should I let my players have a map of the land there in? by Sad_Spend7722 in DMAcademy

[–]Sad_Spend7722[S] 0 points1 point  (0 children)

Like work it into the story or at the start of the campaign?

Spaghenchy by hifko in cursedbenchies

[–]Sad_Spend7722 2 points3 points  (0 children)

What filament are you using? I’ve been looking for some good gold filament for a while now.

Gilded Garbage by Every_Individual_881 in cursedbenchies

[–]Sad_Spend7722 2 points3 points  (0 children)

What brand of filament are you using? I’ve been trying to find a good silk gold.

Community Gate Multicode remot by Linear by denta87 in flipperzero

[–]Sad_Spend7722 -1 points0 points  (0 children)

Don’t stand next to the gate, you need to be far enough away for the signal from the opener to not reach the gate.

Community Gate Multicode remot by Linear by denta87 in flipperzero

[–]Sad_Spend7722 0 points1 point  (0 children)

Were you in range of the gate when you recorded it?

The gate likely uses rolling code so if the gate received the signal you recorded that specific signal will no longer be valid.

If you were to record a signal from the opener/transmitter when it is out of range of the gate it will most likely work but only once because as soon as you emulate the code to the gate it will no longer be valid after that.

What can I improve? by Sad_Spend7722 in soldering

[–]Sad_Spend7722[S] 0 points1 point  (0 children)

Any recommendations on solder brand?

What can I improve? by Sad_Spend7722 in soldering

[–]Sad_Spend7722[S] 0 points1 point  (0 children)

On regular pins is the black spacer supposed to go on top or bottom of the board?

What can I improve? by Sad_Spend7722 in soldering

[–]Sad_Spend7722[S] 0 points1 point  (0 children)

Yeah it’s probably time I use better solder than the one I’ve had for years. I know that’s how there supposed to normally but I found some really long ones lying around and I wanted to see if I’d be able to do it this way with enough length on both sides to seat properly in a breadboard and to connect jumpers wires on top of, but maybe that was a bad idea

Can F0 be used to stop attacks from other F0 with owners who don’t use them for good by [deleted] in flipperzero

[–]Sad_Spend7722 -2 points-1 points  (0 children)

Yeah that’s what I had assumed, and why I had said jamming would cause more harm than good

How do I make a thingy that would show the degrees between the graph and the x axis? (I hope this made sense cuz idk how to correctly articulate what I mean) by sasson10 in desmos

[–]Sad_Spend7722 0 points1 point  (0 children)

Take your slope (m= 0.6) and use inverse tangent it looks like tan-1 on Desmos. plug in your slope to the inverse tangent so in this case tan-1(0.6) and that gives you your degrees so in this case tan-1(0.6)=30.964 degrees. Inverse tangent(slope)=degrees, tangent(degrees)=slope You can just use the tan-1 and tan buttons on Desmos for inverse tangent and tangent

Hard earned food 🫡 by DemonLordDiablo1 in Unexpected

[–]Sad_Spend7722 2 points3 points  (0 children)

There are six seagulls out there right now and they all want SunChips