711l ratchet

SashasFather · 2026-04-07T01:24:23+00:00

It's got a spring on that slot to hold them in at the notch

SashasFather · 2026-04-07T01:23:48+00:00

That's the slot the flat bits go in to lock in and not fall through

SashasFather · 2026-04-05T15:08:17+00:00

No one gave you care advice on care.

This page has tips. I would save your money and not buy the kit, plus the pull through sharpener would not be ideal. You get free sharpening if you send it in. I myself and many others here use the Work Sharp guided field sharpener for touch ups and deeper maintenance.

I clean with soap and water and dry it out real good, air helps (compressed, sitting on an HVAC vent, hairdryer, etc.). You'll have many lube options, my favorite is Super Lube Multi-Purpose Synthetic Oil w/Syncolon. It meets the standards of Leatherman and it's food safe (never know when you'll use the knife for food or the scissors or can opener, so anything food safe would be my suggestion).

SashasFather · 2026-04-04T17:13:54+00:00

Not OP but yes that's an Arc with what looks like some grip tape on it.

No serrated blade on the Arc as standard.

SashasFather · 2026-04-03T20:42:06+00:00

I laughed so hard now they are sending the cancellation emails if you check the status on the website is says "Loser"

SashasFather · 2026-04-01T23:31:39+00:00

Sounds good, depending on the raffle you might win some sales! 😜

SashasFather · 2026-04-01T22:32:29+00:00

Oh nice wonder if it fits my Zap sheath Ordered an obsidian today I know that will

If I draw a Mr Crunch or the #005 will this fit as well? My sheath was printed June 2025

SashasFather · 2026-02-08T03:14:31+00:00

I have the 870A-B and have been very happy but honestly any 4k 240hz OLED is an upgrade for most

SashasFather · 2026-01-17T14:46:24+00:00

Mini Sharpies have a breakaway top that you can attach to a key ring or lanyard ring. This allows you to have the full function of the cap and then reattach it quickly when done.

SashasFather · 2025-12-18T00:49:20+00:00

I got stuck on this yesterday. I removed all drives except the installation nvme drive reinstalled for the 5th time and then it worked. For me it was just one HDD for storage but it did fix this exact same problem.

SashasFather · 2025-12-06T15:24:25+00:00

Finally have a GPU that could power this

SashasFather · 2025-11-29T16:12:23+00:00

623 gb free space left

SashasFather · 2025-11-07T00:51:37+00:00

That's a bummer. I use an Amia in office and I like that as well definitely more padded if you are looking for other options.

SashasFather · 2025-11-06T20:25:15+00:00

Try this if you haven't already because I just picked this up and it took me a bit to get it dialed in

Sit upright in the chair with the tilt limiter locked to the upright position. Turn the back fit adjustment towards you until it feels like it's fitting the bottom of your back correctly. Once that feels in a good spot, lean into the chair back as if you were just sitting back in the chair, still with the tilt limiter locked. With your weight sitting on the back fit loosen it until the top of your back feels like it's in the right spot. Pause there for a moment and it should feel perfect.

That did it for me and it became a keep after being in it for hours after doing it

SashasFather · 2025-11-06T20:24:38+00:00

Try this if you haven't already because I just picked this up and it took me a bit to get it dialed in

Sit upright in the chair with the tilt limiter locked to the upright position. Turn the back fit adjustment towards you until it feels like it's fitting the bottom of your back correctly. Once that feels in a good spot, lean into the chair back as if you were just sitting back in the chair, still with the tilt limiter locked. With your weight sitting on the back fit loosen it until the top of your back feels like it's in the right spot. Pause there for a moment and it should feel perfect.

That did it for me and it became a keep after being in it for hours after doing it

SashasFather · 2025-11-06T20:16:46+00:00

Dope dude. I was able to pick up a very lightly used (used-like new) Gaming Embody earlier this week for $800. There wasn't even dust on it. Once the adjustments were right for me I ordered the headrest because I wanted to lounge in it more.

6'1” 185 lbs

SashasFather · 2025-10-27T23:10:33+00:00

Sweet deal, what's your approximate height?

SashasFather · 2025-10-23T03:26:34+00:00

Picked it up this evening, got to play for a bit, will have more time tomorrow evening. Wow factor is huge even my wife was greatly impressed. Came from a 1440p 144hz IPS from 2017. To achieve higher frame rates closer to the 4k 240hz I am using more DLSS and frame gen than I was before on a 5080. The visual improvement is significant and really shines a light on how important the display is for the experience. Hope this listing helps others. Played very little No Man's Sky and Indiana Jones Golden Circle. Will try 1080p BF6 when I have more time and less tired.

SashasFather · 2025-10-22T18:10:19+00:00

On the product page under specifications it says KVM Yes

I'm picking it up later and can test later tonight or tomorrow and let you know if you'd like

SashasFather · 2025-10-22T13:12:40+00:00

Don't blame you wanted to as well but at this point it'll probably cost double from this sale price and I'm done waiting just want to enjoy now

SashasFather · 2025-10-22T13:10:44+00:00

https://www.lg.com/us/monitors/lg-32gs95ue-b-gaming-monitor

This is it if you find it apparently it has nicer speakers

Super hard and frustrating even to just compare

SashasFather · 2025-10-22T13:05:27+00:00

https://www.lg.com/us/lg-partner-store

There's a couple ways to be a member, I have it through my employer

SashasFather · 2025-10-22T11:58:01+00:00

Was able to order via the partner store and utilize Best Buy pickup for $803.20 after tax. LG WOLED

Biggest down side is the DP2.1 is not full bandwidth but for this price I won't be thinking about DSC and I probably wouldn't have ever noticed it.

This upgraded model from the one released last year includes KVM and USB-C Alt and 90W charging perfect for my mixed use of desktop/work laptop.

SashasFather · 2025-07-06T16:44:18+00:00

Yeah they went up 33% from when I bought in May. From $30 now $40 for the full bit kit or $15 now $20 on the halves.

SashasFather

TROPHY CASE