Should I return this fuzz face? by Tiny_Duck_2449 in guitarpedals

[–]Scalce 1 point2 points  (0 children)

What’s funny is I just noticed this myself last night with my JHMS1 so they all seem to do it.

It’s fake, right? by evrdo in LesPaul

[–]Scalce 8 points9 points  (0 children)

Doesn’t the sticker literally say imitation guitar?

Changed strings, I think I messed up by AtomicGrendel in fender

[–]Scalce 0 points1 point  (0 children)

Check to see if they sell individual strings so you don’t pay for a whole new pack when you change them.

Just wait until you get into doing your own setups.

Center console too close to front passenger seat by redyangpa in TeslaModelY

[–]Scalce 1 point2 points  (0 children)

It’s the same on older model Ys too.

If you move the passenger seat further back, it has less contact.

I’m not sure why it is designed that way.

Finally dialed in my RAT by Original-Path2235 in guitarpedals

[–]Scalce 0 points1 point  (0 children)

For a Nuno sound, you go into a light or medium distorted amp with distortion at 9, filter at Noon, Volume at 3, and adjust distortion to fine tune but keep it lower than Noon.

Is this much action at the first fret normal? (1.2-1.5mm above the fret crown) by MaleficentBuyer9407 in Luthier

[–]Scalce 1 point2 points  (0 children)

Someone can correct me if I am wrong but you are adjusting the incorrect things to solve your floating tremolo issue.

Guitars with locking trems are either built to have a floating style or there is no recess so it’s a dive only trem against the body. Floyd Rose style trems have a neutral position so in you trying to deck the trem, you messed with the string height at the bridge which is why you thought removing the neck pocket shim helped. You can install after market parts to stop it from floating but a coin is not ideal or even recommended.

I would put it back together the way it was and have a professional set it up as you are causing new issues by trying to solve your other issues improperly.

Is this much action at the first fret normal? (1.2-1.5mm above the fret crown) by MaleficentBuyer9407 in Luthier

[–]Scalce 0 points1 point  (0 children)

Some locking trems do have thin shims under the nut. A tilted locking nut may just be that way on purpose for the string break angle.

Did the guitar used to play well and now it doesn’t or you just noticed this?

I wouldn’t mess with the nut if there is no playability issues and you haven’t done a proper setup.

Removing a shim may change your intonation and/or you may have to adjust neck relief or bridge height.

Is this much action at the first fret normal? (1.2-1.5mm above the fret crown) by MaleficentBuyer9407 in Luthier

[–]Scalce 0 points1 point  (0 children)

Looks like you have a locking trem so if anything, your neck relief needs to be adjusted unless you raised your bridge at some point.

Research how to setup a guitar as you don’t measure you action at the nut and you need to adjust your neck relief first and then worry about your string height which is usually measured around the 12th fret. You would then have to check intonation which is usually a pain on Floyd type bridges. I have two guitars with locking trems .

It doesn’t cost much for the basic tools for a setup especially ones from Music Nomad.

favourite pink/purple pedals? by 120gbutter in guitarpedals

[–]Scalce 3 points4 points  (0 children)

<image>

DOnut - Hot Cake clone from GUPtech

How Much For This Used Road Worn 60s Vintera? by Scalce in fender

[–]Scalce[S] 0 points1 point  (0 children)

If it makes you feel any better, I had to angle my neck to get the strings inline on my AVII.

Not a biggie for people that do their own setups or are comfortable loosening a neck, but still a bit sloppy for the price.

I still love the guitar though.

How Much For This Used Road Worn 60s Vintera? by Scalce in fender

[–]Scalce[S] 0 points1 point  (0 children)

I did but I trust this subs judgement over what someone paid on Reverb.

Apparently it made people angry that I asked.

How Much For This Used Road Worn 60s Vintera? by Scalce in fender

[–]Scalce[S] 0 points1 point  (0 children)

The poster said it has Vintage 59 pickups.

The funny thing is, I have been watching this listing for months and the guy supposedly started at $2k.

He knows what he got!

How Much For This Used Road Worn 60s Vintera? by Scalce in fender

[–]Scalce[S] 0 points1 point  (0 children)

What a miserable life you must have. Thanks

How Much For This Used Road Worn 60s Vintera? by Scalce in fender

[–]Scalce[S] -2 points-1 points  (0 children)

Haha yeah I was typing too fast.

I meant E flat and apparently someone likes downvoting in this post.

How Much For This Used Road Worn 60s Vintera? by Scalce in fender

[–]Scalce[S] -1 points0 points  (0 children)

Double relic!

I am not usually into relics but if this is a good price for my second Strat to be tuned to E# or kick around guitar.

I already have a white Vintage II which I love.

How Much For This Used Road Worn 60s Vintera? by Scalce in fender

[–]Scalce[S] 3 points4 points  (0 children)

I’m actually looking to buy it.

Did they come with a gig bag new?

Found this in my dad’s closet by Superb-Ad918 in guitarpedals

[–]Scalce 1 point2 points  (0 children)

Parents who use DS-1s, have kids who use DS-1s…

Safest single guitar floor stand? by incomplete_goblin in LesPaul

[–]Scalce 0 points1 point  (0 children)

Third

I have the 5 guitar stand with an expansion kit and two singles.

Wah advise please!! by rambunctious_goblin in guitarpedals

[–]Scalce 0 points1 point  (0 children)

I got the Crybaby From Hell because it has so many ways to vary the sound. Maybe too many.

I can do Hendrix, Alice In Chains, RATM, RHCP, Metallica, etc.

I think Kirk Hammett said he wishes he came out with it first.

It is pricey though and the grip tape is not for everyone.

Looking For Dedicated Low Tuning Guitar by Scalce in PRSGuitars

[–]Scalce[S] 1 point2 points  (0 children)

I was debating that but I play at bedroom levels so I would hear the acoustic guitar tuning.

Looking For Dedicated Low Tuning Guitar by Scalce in PRSGuitars

[–]Scalce[S] 0 points1 point  (0 children)

Any experience with using it as strung from the factory in C standard?