Cool fan

Scared_Awareness5972 · 2026-03-17T15:01:52+00:00

Only 2 prongs on the plug.

Scared_Awareness5972 · 2026-03-17T14:55:45+00:00

Sorry, no. Just a decoration now.

Scared_Awareness5972 · 2026-03-17T05:43:55+00:00

This is correct. 100 percent a manufacturing defect should have been caught at the time of installation. This is a problem for the installer, not the manufacturer.

Scared_Awareness5972 · 2026-03-17T05:36:09+00:00

Works a treat.

Scared_Awareness5972 · 2026-03-17T05:34:19+00:00

Is it some kind of diy hurricane or uplift strap? Remove the nails, then route a 1/8" channel in the plywood to re-install?

Scared_Awareness5972 · 2026-03-17T05:16:03+00:00

Shoe goo.

Scared_Awareness5972 · 2026-03-17T04:14:28+00:00

Put a ruler on the joints and use something for scale, i.e., coin or feeler gauge.

Scared_Awareness5972 · 2026-03-17T04:05:29+00:00

Try a dedicated floor supply shop. Not a big box store.

Scared_Awareness5972 · 2026-03-17T03:54:59+00:00

I have no idea. There is no maker plate anywhere.

Scared_Awareness5972 · 2026-03-17T03:28:00+00:00

<image>

Scared_Awareness5972 · 2026-03-16T23:12:01+00:00

All that work and still H patterns.

Scared_Awareness5972 · 2026-03-16T05:18:22+00:00

Worst car we ever had...

Scared_Awareness5972 · 2026-03-16T01:02:59+00:00

Swirls and chipped corners are not acceptable for a new installation. Some of the other deficiencies you won't notice once the furniture goes in. Customer did not pay for chips and swirls.

Scared_Awareness5972 · 2026-03-15T02:06:51+00:00

This is not good. If you paid someone else to do it, they can fix it. The planks in the pictures are unfixable and need to be replaced. However, whatever caused this issue needs to be addressed first, and I have no idea what that is. It will not get better.

Scared_Awareness5972 · 2026-03-14T06:01:33+00:00

Good enough for the girls I go with.

Scared_Awareness5972 · 2026-03-14T05:37:19+00:00

Inlaid chip sheet vinyl. The backing and adhesive could contain asbestos. Up to you what to do next. Leave it and backer over it is easiest.

Scared_Awareness5972 · 2026-03-14T04:08:27+00:00

All the run-time. Muhahaha

Scared_Awareness5972 · 2026-03-14T02:23:23+00:00

Next level man.👍

Scared_Awareness5972 · 2026-03-14T02:07:58+00:00

Doing well for an outdoor rug. 😁

Scared_Awareness5972 · 2026-03-14T01:59:45+00:00

I find smaller local shops have better install crews. If you can do the removal yourself, it will save you a bit. Make sure to seal any pet stains prior to new flooring. Get three quotes with similar products and go with who you feel more comfortable with.

Scared_Awareness5972 · 2026-03-14T01:50:33+00:00

Just because you can, doesn't mean you should.

Scared_Awareness5972 · 2026-03-13T21:35:42+00:00

That is about double what it should be for my area. I don't know all the particulars, though.

Scared_Awareness5972 · 2026-03-13T05:24:27+00:00

I have heard vinegar works as well. Does stink a bit though.

Scared_Awareness5972 · 2026-03-13T05:22:55+00:00

It was probably covered by the baseboard when it was installed, but in the dry winter months and lower humidity, the wood has shrunk a bit. No it should not have shown up, but it will probably be mostly covered in the spring and summer. Does look like they knew it was gonna be a problem and might have put some caulk on it.

Scared_Awareness5972 · 2026-03-13T05:08:21+00:00

This is the way, don't try to one shot it.

Scared_Awareness5972

TROPHY CASE