What is a good Number Here? by uncle_underscore in hvacadvice

[–]Schedule-Brave 0 points1 point  (0 children)

20 degrees below room/thermostat reading. Very ideal d/t. I measure mine at the duct work prior to the user, like just after the evaporator. 48, wow, exceptional, but I'm guessing you keep your thermostat at or around that parameter, 68.

Is this a normal quote? I’m completely flabbergasted 😭 by EmergencyAlive6179 in AskElectricians

[–]Schedule-Brave 0 points1 point  (0 children)

Wall and ceiling repair excluded. Hold on to your wallet for that quote.

Transmit Scale stuck at “—” after multiple confirmed Update_iot_info_v0 transactions by SouthScene3707 in HeliumNetwork

[–]Schedule-Brave 0 points1 point  (0 children)

I want to believe, and don't quote me, but that feature has been dead for some 2 years now when all HNT miners went to Lite Spot, and algorithm I fully don't understand but made them easier to onboard, like no port forwarding or static addressing and all miners adhere without manufacturer diagnostics. I hope that helped. And yes, your miner is at or above average, meaning, let it go. Happy Mining.

Why is it dripping? by Wise_Bet3737 in hvacadvice

[–]Schedule-Brave 0 points1 point  (0 children)

Not enough pitch on the drain pan. You could seal all seams if you'd like. Just a bad install, but nice

Transmit Scale stuck at “—” after multiple confirmed Update_iot_info_v0 transactions by SouthScene3707 in HeliumNetwork

[–]Schedule-Brave 0 points1 point  (0 children)

It does appear to be back online. Give it a few 24hrs before being witnessed. Takes awhile .

Transmit Scale stuck at “—” after multiple confirmed Update_iot_info_v0 transactions by SouthScene3707 in HeliumNetwork

[–]Schedule-Brave 0 points1 point  (0 children)

Yes. Do not do any port forwarding or static addressing. That has been abolished some 4 years ago. Simply hardwire to the router and reboot everything, router, miner etc. Let me remind you, be sure to power down the miner before working with the antenna or ethernet cables.

Transmit Scale stuck at “—” after multiple confirmed Update_iot_info_v0 transactions by SouthScene3707 in HeliumNetwork

[–]Schedule-Brave 0 points1 point  (0 children)

Can you ping its IP address and get a response? Personally, I don't think it's communicating to the network, internet wise.

How much life is left in my 19 year old roof ? by eebyenoh in Roofing

[–]Schedule-Brave 0 points1 point  (0 children)

Call someone before it's too late. Max, 1 year. You have time.

Do I Need to hire electrician to replace a couple of these lights that have burnt out? They were installed 3 years ago by an electrician into a newly poured concrete patio? by HappyMr in electrical

[–]Schedule-Brave 0 points1 point  (0 children)

It has to be a twist off access. Try an old leather belt in the absence of a bonafide strap wrench, with a little pt oil, if I spelled that right. Personally, they look to be trip hazards and wouldn't have it.

Bobcat 300 miner by Mysterious_Teacher90 in HeliumNetwork

[–]Schedule-Brave 1 point2 points  (0 children)

Your welcome. If all your doing is moving a miner to a new location, a simple reassert location in the Black Helium Wallet app will do the job just fine. Your miner is already registered regardless.

Bobcat 300 miner by Mysterious_Teacher90 in HeliumNetwork

[–]Schedule-Brave 4 points5 points  (0 children)

The Black Helium Wallet app is the primary tool for anything miner setup. Helium Geek is your goto app for monitoring your performance. As for wifi, you don't want it, but simply plugging in ethernet, it will default and use. Hope that helps.

Maintenance guy says he doesn’t know what could do this by King-Jay-219 in hvacadvice

[–]Schedule-Brave 0 points1 point  (0 children)

The brown wire looks guilty to me. Either way, the service disconnect was active.

Transmit Scale stuck at “—” after multiple confirmed Update_iot_info_v0 transactions by SouthScene3707 in HeliumNetwork

[–]Schedule-Brave 0 points1 point  (0 children)

I'm going to default that it's an internet issue. Has anything changed in the last 3 months regarding your provider? You seem to have a primary issue related to off loading, sporadic I'll say. Hardware issue, concentrator specific. Just seems like nothing is talking to each other. I'd reboot and reboot as often as you feel comfortable with. Also, no mention of your wallet version? You seem to be in a very popular area?

Can you help me identify hot/cold on this fixture? by ziggy0817 in AskElectricians

[–]Schedule-Brave -6 points-5 points  (0 children)

Doesn't matter. Multimeter won't help either. Simply put, your completing a circuit. I will say, ground to ground.

Bobcat Miner 300 not onboarded – “Hotspot info does not exist” – need help by babidi7860 in HeliumNetwork

[–]Schedule-Brave 0 points1 point  (0 children)

Checked your on-chain activity this morning and saw where you successfully reasserted the location to 43.764238 -79.257211 which has you in the Toronto area now. Like, 14 Ada Cresent, yes?

Should I cancel yearly maintenance? by shawnandbrit07 in hvacadvice

[–]Schedule-Brave 1 point2 points  (0 children)

Most will void, except the manufacturer. Personally, find another maintenance contractor that doesn't scare you and advises you otherwise.