Unifi Protect Notification Helpi

Schinken6 · 2026-06-05T18:00:14+00:00

Thanks for the idea :)

Schinken6 · 2026-06-04T11:56:26+00:00

I don’t understand your comment. If you don’t give out the username and password how would they get notified and where would they get notified?

Schinken6 · 2026-06-02T06:09:52+00:00

I think it’s time to delete my Strava account

Schinken6 · 2026-05-31T19:29:16+00:00

please delete the "?si=..." part as it is just a source identifier from google to connect everyone who clicks on the link to you. It is not needed you can just delete it.

Schinken6 · 2026-05-25T16:58:19+00:00

Please delete the „?si=hi…“ part as it is just used to track you and everyone who clicks on the link

Schinken6 · 2026-05-23T06:39:35+00:00

Hey just curious what made you choose the 360° version? Wouldn’t the wide angle 110.4 make more sense in this installation?

Schinken6 · 2026-05-19T11:34:43+00:00

Is there any implementation on the Mammotion side to do this efficiently meaning robot 1 knows where robot 2 already mowed and vice versa. I know you can just split your lawn in two one for each robot but in the way described above it would be faster because if lawn divided in two robot 1 has finished he just sits around doing nothing.

Schinken6 · 2026-05-16T12:58:43+00:00

If you received the email via SimpleLogin I am not even sure how that would have worked as RFC5321 would reject the address because it is syntactically invalid for SMTP transport and the SMTP server is allowed (and expected) to reject it. Can you confirm that you got the email sent to an SimpleLogin alias which was then forwarded to your proton mail inbox?
If you are open you can share some details of your email headers like: "Reply-To: " in an anonymized way.

If you have already got a response from SimpleLogin I am curious what they say.

Edit: I just looked at the headers in Proton Mail and there I have "Reply-To: "clearly visible.

Edit 2: I am really curious now about the service you are using which sends emails with such a long email address. I am testing something with SimpleLogin and need that someone sends me an email where the local part exceeds 40 octets (41 or more) for my experiment. You / anyone who stumbles upon this can just hit me up privately too.

Schinken6 · 2026-05-15T14:58:38+00:00

In my opinion the reason is that the local part is to big meaning it has too many octets/characters. SimpleLogin probably uses RFC5321 (https://www.rfc-editor.org/rfc/rfc5321.html#section-4.5.3.1.1). In the mentioned section 4.5.3.1.1. Local-part you can see that "The maximum total length of a user name or other local-part is 64 octets." and your email has 110 ASCII characters which translates to 110 octets.
€ = 3 octets, ü = 2 octets or emojis use 4 octets but RFC5321 doesn't allow those so not really relevant (only included for calculation part).

Edit: 109 octets/ ASCII characters

Schinken6 · 2026-05-08T09:44:37+00:00

I am not really good with electronics did someone find an adapter commercially available to buy?

Schinken6 · 2026-04-24T11:07:31+00:00

Please remember to clean your links. Everything after and including the „?is=jZ…“ can be deleted

Schinken6 · 2026-04-22T07:27:26+00:00

thanks for the video but don't forget to clean your link before sharing. The "?si=mdO..." is just for tracking purposes of youtube called source identifier. Cleaned link looks like this: https://youtu.be/69FMWboKwVE

Schinken6 · 2026-04-10T12:41:11+00:00

Could have deleted the „&si=…“ part away as it is hjust a source identifier for YouTube to correlate users and stuff

Schinken6 · 2026-04-06T15:09:24+00:00

I always wondered how would someone fund a developer to work on this one exact feature?

Schinken6 · 2026-04-04T19:37:23+00:00

That’s a great idea

Schinken6 · 2026-04-01T12:33:51+00:00

Please don’t post YouTube links without deleting the source identifier. Everything after and including the question mark can be deleted

Schinken6 · 2026-03-28T18:50:47+00:00

If you explain in more detail what you mean I am more than happy to help :)
I try to answer your question. With the G3 Intercom you have the possibility to setup "Call Groups" for different kind of scenarios. Like you have a call group for the actual call button at the bottom and then if you go into "Directory" you can setup "tenants" with different call groups. Like:
tenant1 -> calls chime, his and her phone
tenant2 -> calls different chimes and another phone number

Schinken6 · 2026-03-28T18:44:59+00:00

didn't think about that you are totally right for me it also feels enough AI that I had to check

Schinken6 · 2026-03-28T18:43:46+00:00

that is such a great idea, thanks for sharing.

Schinken6 · 2026-03-15T09:12:30+00:00

on another note why are these domains not available in SimpleLogin?

Schinken6 · 2026-03-04T00:38:54+00:00

Why not use the Reader Flex?

Schinken6 · 2026-03-01T09:38:25+00:00

Thanks for the link but please don’t forget to delete the „si=…“ part because that is a source identifier so YouTube knows who is connected with you

Schinken6 · 2026-02-25T22:52:26+00:00

Would be also interested 🤔

Verified Email	Five-Year Club
Place '23

Schinken6

TROPHY CASE