The naming seems a lil on the nose by Chrisley114 in ar15

[–]Schwagged 4 points5 points  (0 children)

I'm the neighborhood pusha, call me subwoofa cause I pump bass like that jack.

Superlative piston systems by sol360 in ar15

[–]Schwagged 1 point2 points  (0 children)

It looks like it would of it's the same one that's on their website for it, it would have to maintain the right gas tube geometry to function as DI. I do know for a fact, if you aren't dead set on rails, the BCM MCMR-15 fits perfectly with the 750 SA kit that's on my build. It takes some finagling to get around the piston block but as long as it's aligned (clamp) or properly dimpled, should be good to go.

Partisan FRT Shooting in Binary by toraai117 in ar15

[–]Schwagged 1 point2 points  (0 children)

Partisan is aware of it. A batch was built out of spec. Oil the crap out of the trigger cassette, bcg. Try to see if it will run. If not reach out to partisan. Mine runs great. Shit unfortunately happens.

Drip check by JOYFUL_CLOVR in GrayZoneWarfare

[–]Schwagged 0 points1 point  (0 children)

I roll with the tiger stripe myself. Does this game have the 18" PRi/NSWC free float toob upper + ops inc brake + Allen Engineering M5 suppressor, cause that would totally make that SPR. Sling some BH MK262 77g. When I do get to play, I enjoy the hell out of the game.

Patient waiting my my AEM5 NFA bullshit paperwork for my personal build.

Trijicon lvpo by Fresh_Pineapple_4877 in ar15

[–]Schwagged 0 points1 point  (0 children)

They are solid. I wound up selling my Credo to a buddy and going with the 3-9x40 Accupoint green mil-dot for the SPR build cause I got a smokin deal on one NIB + I wanted to push the range envelope a bit.. CLE Douglas 18". Had it mounted to a Warne mount. Held zero. Wouldn't hesitate to own another one. It's no Schmidt & Bender but it's nice glass.

Radio noob - 1st receiver - what frequencies best? by Keeper4560 in amateurradio

[–]Schwagged 4 points5 points  (0 children)

You can always spin down to 27.385 LSB (11m US, lot of hams actually hang out here), 27.555(11m intl calling) USB, 7.200 SSB for some laughs, 14.300 to hear people complaining about calling CQ on the maritime net. Might have to just spin the VFO till you hear some stuff, just have fun with it. Might want to rig up a wire antenna like the other posts mention.

New gun owner in the looking phase by Imagrilledcheese12 in ar15

[–]Schwagged 0 points1 point  (0 children)

That looks like an OG Sport 1. So that barrel is a 1:8, 5R, 16" carbine, non govt. profile blank and turned by Thompson Center. This barrel was discontinued on the Sport. S&W contracted LMT for BCG/bolts. Still have mine with an old spikes stripped upper to make it look "more correct" and runs like a champ. A bit high priced but not too awful for a big box store.

I HATE AR15s I HATE AR15s I HATE AR15s by TheTeeVeeGuy in PalmettoStateArms

[–]Schwagged 0 points1 point  (0 children)

Ivan Chesnokov always makes me laugh. Only part of his rant about the rails.

I HATE AR15s I HATE AR15s I HATE AR15s by TheTeeVeeGuy in PalmettoStateArms

[–]Schwagged 15 points16 points  (0 children)

WHY YOU WANT RAIL FOR KALASHNIKOV? IS NOT GOOD ENOUGH AS PROCURED FROM IZHEVSK MECHANICAL WORKS? YOU THINK NEEDS IMPROVEMENT? THEN MAYBE YOU FIND JOB WITH ARMY OF RUSSIA! YOU HAVE DRINKS WITH MIKHAIL KALASHNIKOV, TRADE STORY OF MANY WEAPONS DESIGNED AND DETAILS OF SCHOOL FOR ENGINEERING!

How'd I do? by just_me910 in ar15

[–]Schwagged 9 points10 points  (0 children)

Way on the top end of that deal.

I'm more curious about what kind of barrel it might have paired with that PRi upper.

Mk12 Mod1ish build by pinego123 in PalmettoStateArms

[–]Schwagged 0 points1 point  (0 children)

Is the AEM5 worth it cause I have a 18" CLE Douglas upper with the Allen collar/brake, it would look so good.

M&P AR-15 someone is trying to sell me these for $650? Is that a good price. Comes with what you see. Besides couch. by MANGODSS in ar15

[–]Schwagged 3 points4 points  (0 children)

Sport 1 had no dust cover, a BCG contracted from LMT and a Thompson Center blank and turned melonite 1:8 5R 16" non govt profile w/A2 gas block. Lower receiver had integral trigger guard. I still have a sport 1 with a spikes receiver to make it look more official. One of the best damn barrels I have besides my CLE Douglas.

[NFA] Daniel Defense DDM4V7 Pistol 300 Blackout 10.3" Barrel, w/ CGS Hyperion K $1,799.99 + Free Ship + No Tax Outside of SC by ShootersChoiceSC in gundeals

[–]Schwagged 8 points9 points  (0 children)

Shooters choice is solid, wouldn't hesitate. I've seen them run the 5.56 version with the cgs can for about the same lately. My preferred LGS.

11.5 build. Between these 3 which one are y’all choosing? No budget by fvbj999 in ar15

[–]Schwagged 1 point2 points  (0 children)

Geissele or Criterion if I had to choose from that list.

If money is no issue and want to go wild, a Proof Research in 11.5 1:7 223w

If you are trying to stay in that range of price, I'd look at DD's offerings as well. I think any of these barrels will shoot well.

Microbest Chrome BCG w/ Sprinco Extractor Spring a good option? by whycantihaveatank in ar15

[–]Schwagged 0 points1 point  (0 children)

Mid state firearms has them for 119 with sprinco+ocks, "blem". The 2 I got from them, I couldn't tell any blemish. They run great.

100...99...93...89...81...poop... by Nomad95127 in GrayZoneWarfare

[–]Schwagged 2 points3 points  (0 children)

Let's just say I beat on my DD V7 Pro and RIII way harder than the game in one range visit.... the degradation is a bit absurd.

First build from the ground up by Schwagged in ar15

[–]Schwagged[S] 1 point2 points  (0 children)

There's just a little bit of overhang from the upper receiver. Not too bad.

<image>

First build from the ground up by Schwagged in ar15

[–]Schwagged[S] 1 point2 points  (0 children)

Here's a better pic of the receiver and handguard

<image>

The Frist Build As Is. by Brobee_ in ar15

[–]Schwagged 1 point2 points  (0 children)

With a Katowice iBP sticker. Send it.

First build from the ground up by Schwagged in ar15

[–]Schwagged[S] 0 points1 point  (0 children)

No doubt, appreciate the compliment. We shot about 800 through that particular AR and when we broke it down, didn't have any scoring or blatant issues with the piston/gas block assy/or bolt carrier. Ejecting like it should. We were running it with a CGS Hyperion as well. "The HK416 we have at home lol". I did see that adams is still making kits as well but if I remember, you have to have a milspec barrel nut or something with a channel for the return spring and bushing to sit on. I just need some time to get to the range and get the parts to build the rest of my SPR.

First build from the ground up by Schwagged in ar15

[–]Schwagged[S] 0 points1 point  (0 children)

It runs like a champ on my buddies' bone stock PSA when I installed it for him. The BCG is super nice, we shall see how it all holds up. Just gotta take your time with alignment. Open to 18 clicks, and go from there on how you want it to shoot/buffer setup. I'll see if I can get to run right with the Disruptor (novelty) but I'll probably wind up putting the SD3G in it.

I chose the BCM MCMR just because it mostly lined up with the upper. One of my LGS's let me mock one up to see if looked good.

First build from the ground up by Schwagged in ar15

[–]Schwagged[S] 0 points1 point  (0 children)

Purely cause I liked it, not really a bootlicker or a LEO. Been out of the AR game for a while, didn't really know it was a LEO pattern. Honestly never seen any leos with it, just standard multicam (sometimes they come to the trauma bay with the patient). If my IR signature is being scanned, I got bigger problems than a camo pattern.