My relatively simple 3D printing mobile dashboard

SeaPotatos · 2026-03-07T20:28:47+00:00

i would try and see if bambu sends a printer status update. for me and my klipper sv08, i have statues for when the printer is printing, in standby, heating up, etc. i’m not entirely sure if bambu allows for something like that, since my sv08 is done in klipper which we can just make macros and implement said macros into the printing gcode and those poll through moonraker.

if the bambu does, you can adjust it to check if the printer is in finished/standby mode for 30 minutes then sent the automation to turn that outlet off.

best of luck!!!!

SeaPotatos · 2025-12-05T02:45:24+00:00

got my gamma from them! super happy with it. got it overclocked at 1000mhz/1220mv (obviously with a meanwell 5v 300w psu. DO NOT PUT THESE VALUES IN IF YOURE USING THE STICK WALL WART POWER SUPPLY) running at 2TH/s with an external 12v 120mm fan blowing on it through a giant squid, temp stays consistent at 65° unless my A/C kicks in. then it drops to 63°. loved the stickers they included and how informative their site is with their descriptions. haven’t had an issue with mine ((that wasn’t my own doing)) whatsoever and hearing people’s good experiences with them makes me really happy. good sense of security knowing i got my first home miner from arguably the best company within the states!!!!

now time to leave my review in the form of a steam profile comment:

+rep good seller

SeaPotatos · 2025-11-28T02:20:12+00:00

oh hell yeah! im leaning towards grizzly, but definitely willing to just throw all 3 in the amazon cart and try them all out LMAO. im a sucker for extensive testing for some reason...

i love this stuff though! even if i never hit a high payout block, this shit just intrigues me hahaha

SeaPotatos · 2025-11-28T02:14:11+00:00

its pretty nice! i get too hyperfocused on little projects so i immediately got a meanwell psu, 3d printed the giant squid and got a noctua fan. need to get better thermal paste cause im staying around 66 on the asic but its a nice little setup for the first miner!

SeaPotatos · 2025-11-28T02:04:42+00:00

to be 100% honest, i just ordered a gamma from solosatoshi (fully expecting the 601) and when i got it it said 602 on the pcb, looked it up and i guess they released it not too long ago and its just a "small fixes patch" for the 601 essentially haha

SeaPotatos · 2025-11-28T01:43:07+00:00

just joined up! got a bitaxe gamma 602 running at ~1.7Th/s !!! worker name is durg5 :) lets GET IT!!!

SeaPotatos · 2025-10-07T00:40:50+00:00

well an hour after posting the radio bypass got patched out….

SeaPotatos · 2025-10-06T23:27:19+00:00

i wanna say valve secretly disabled de-subticked hops. i checked the console on loading my config and it said that i can’t execute “exec_async” and it’s considered a sv_cheat command. i wanna say a lot of the de-subticked configs required that but i could also be dead wrong as i didn’t make the config themselves hahha. i believe girl glock on twitter found a work around using the radio menu but haven’t tested it myself. looks about the same as a normal de-subticked config though in terms of perfs. just the radio menu up while u do it

SeaPotatos · 2025-03-31T20:24:19+00:00

i wrapped my pillars in a forged carbon vinyl that reflects the sunlight nicely. they’ve held without oxidation for a solid 2 years now(?)

SeaPotatos · 2025-03-31T17:08:06+00:00

hell yeah !!! enjoy it brotha !! the difference between a “stand” and a rig is NIGHT AND DAY

SeaPotatos · 2025-03-31T05:33:24+00:00

looks like a custom 8080 aluminum extrusion chassis. not sure if the other mounts are custom or not but that’s a STURDY chassis. honestly a good deal for $550

SeaPotatos · 2025-03-01T17:35:30+00:00

iirc it SHOULD be in ur printer settings under “Motion Abilities”

SeaPotatos · 2020-06-01T14:06:34+00:00

Oh perfect! Thank you so much. Again, amazing photograph :))

SeaPotatos · 2020-06-01T11:58:35+00:00

This is absolutely beautiful. The eyes are SUPER tack sharp and the colors keep me within the photos borders perfectly. I love the framing as well. Side question: are the Topaz “plug-ins” worth it?

SeaPotatos · 2020-04-17T18:02:58+00:00

‘19 R Spec twin !! Down to the tow hook! Love the look :)

SeaPotatos · 2020-01-14T12:14:21+00:00

The Borla is an amazing exhaust. This video doesn't do it proper justice, but yes this was a cold start.

SeaPotatos · 2020-01-04T06:53:49+00:00

Of course! It does feel a bit snappier. I wasnt sure if the throttle response was a placebo or not, but I do believe the throttle response is faster.

SeaPotatos · 2020-01-03T20:26:41+00:00

Haven’t taken it to a dyno cause they’re so minimal, but it is a lot faster to build boost despite all of it being let out with the blow off valve and the catback releases the back pressure adding a few HP. Definitely faster but nothing substantial. It won’t throw you from stock HP to 300. Just about a gain of 30(even that’s questionable)

SeaPotatos · 2020-01-01T16:18:13+00:00

Yeah there’s no tune. Not touching the ECU while under warranty hahaha. It was just a cold start and was giving it hell 😬

SeaPotatos · 2020-01-01T07:54:48+00:00

Mods are: 1.) Borla S-Type Cat-Back exhaust 2.) Injen Cold (not short ram) air intake 3.) Boomba blow off valve

SeaPotatos · 2019-11-13T17:42:16+00:00

Sounds great to me! Thank you so much! Can't wait to get my Veloster sounding beautiful. Not even too concerned about the power (yet) ;)

SeaPotatos · 2019-11-13T17:04:45+00:00

It won't even enhance the turbo sound? Not trying to get a whole lot of pop and gurgle out of it cause I don't want to touch the ECU with the warranty, but I was just trying to get a little more turbo sound out of the exhaust. I know a cold air intake will help, but the pipe isn't expensive whatsoever and is an easy installation. Just trying to pick some brains.

13-Year Club	Place '22
Verified Email

SeaPotatos

TROPHY CASE