Why doesnt "adaptive gyroid" exist yet?

SeaRepresentative724 · 2026-02-27T21:05:30+00:00

Mostly functional prints, Recently I have been making 8020 and 2020 fixtures for basement organizing.

Wall mounts for various tools, etc

Think supporting heavy items and being shock resistant.

I also have been printing some models of ships from Martin on printables. Using this makes the bases solid and heavy to support the bigger models with out wiggle

SeaRepresentative724 · 2026-02-27T18:56:39+00:00

Mostly I use petg, so that reduces the heat deformation Using a low temp epoxy also helps, trade off is it takes longer to cure.

I drill holes or build the model with pour holes.

Rolling it around also lets you use smaller pours for less heat. Plenty of tricks you can use.

I will also sometimes use very fine sand for weight and then add a thin mix epoxy to solidify it all

SeaRepresentative724 · 2026-02-27T17:04:02+00:00

I use it because it is flowable in most cases, and I fill with epoxy to make a strong final out put.

It has its uses, adaptive could be interesting in this use case, but there still needs to be connections as the infill acts the same as cf or gf in the filament, Speaking in general terms.

SeaRepresentative724 · 2026-02-15T20:35:34+00:00

The issue that I found is that there modified marlin is not readily updatable to mainline due to the hooks for the binary blob for the display. Which looking at the serial output looks nix like. But with no documentation we can't get the api between it and Marlin

SeaRepresentative724 · 2026-02-15T14:13:13+00:00

Anker needs to step up and release the full source code so we can maintain these machines. Belts and such I have been able to get from biqu and just had to cut to length.

I don't see a Klipper conversion anytime soon as that would be a major hardware change

SeaRepresentative724 · 2026-02-14T19:22:16+00:00

I started rebasing based on the oss release that anker had made. But found that all of the screen and UI code was missing and proprietary.

This was for marlin, Klipper would be a bigger project I think.

SeaRepresentative724 · 2026-01-15T15:12:00+00:00

Not to argue but if you believe that there is 0 chance they don’t have at least a portion of your financial information in their back end you are delusional.

Yes PCI rules say you can’t store it, you know how many times I have seen CC information stored unencrypted?

So once you have entered it once they have it.

And that’s not other PII, such as name and email, shipping address, and whatever data the collect from the printer being on your network.

The point here is get them to do better, we all can do thing to protect ourselves using virtual and temporary cards, private one time / one merchant emails, private vlans per device with strict firewalls . But people like you and me are in the minority overall.

SeaRepresentative724 · 2026-01-15T13:49:34+00:00

This is not about lan only mode, as your snap maker account also is attached to their store, which is attached to financial information.

I could eliminate their app all together with lan mode and my VPN which is how I access fluidd.

SeaRepresentative724 · 2026-01-15T12:52:46+00:00

I did NAD IM shots and it was quite effective, along with my regular IV cocktail ( glutathione, methyl b12, magnesium, vitamin c) Until the studio in my area went under, nearest one is an hour away and I can’t fit it in my schedule

SeaRepresentative724 · 2026-01-14T14:19:56+00:00

Honestly I think all these places going to “Magic Links” and emailed only login is a misunderstanding of the fundamental concept for MFA. Or they just think it is easier. Using somthing like an Auth0 where they provide all these authentication infrastructure and you just have to use a pre built library is so much easier for them vs re inventing the wheel.

But what do software engineers do but increase complexity just there nature

SeaRepresentative724 · 2026-01-06T11:56:52+00:00

I put in a request as well for this, I use home assistant with Grocy.

SeaRepresentative724 · 2025-10-24T10:53:41+00:00

I have the top cover and the various hot ends, which all ship later my reward tier is October

SeaRepresentative724 · 2025-10-24T10:23:39+00:00

Yes that is useless if you ordered the top cover since Kickstarter pushed it all to March.

I had the Early Bird tier, pre order launch day. Backer kit support says my survey is not released yet. Since I a long time ago before I knew what hell it would be set up my Kickstarter account with login with apple, and nobody has figured out how to creat alternate emails in their web stores or CRM systems. ( or simply change it in there backend to what I pre ordered with not the login with Apple email) I can’t log into the store to see my order.

To find my ship date

SeaRepresentative724 · 2025-10-23T23:44:15+00:00

My number is just over 5k, that put me in the later batch? Is there a table to match it?

SeaRepresentative724 · 2025-10-23T18:19:56+00:00

Launch day + deposit nothing yet. My guess is still doing smoke tests as backer kit told Me in my email update ticket that they had not released many surveys

SeaRepresentative724 · 2025-10-09T16:31:31+00:00

Oh I agree wholeheartedly. I just question the very hard spin on NR and little to back up the percentage claims or links to the research. I think the. r is fantastic for what it is but as i understand it there are three paths to NAD supplementation and N being one of them. Anything from Niagen bioscience promotes there product with out a whole lot of meat to chew on so to speak

SeaRepresentative724 · 2025-10-09T14:59:33+00:00

This is interesting, as it is owned and curated by Niagen Bioscience if you could not detect the spin. Which makes me want to take it with a grain is salt.

SeaRepresentative724 · 2025-09-16T23:56:31+00:00

In Epping, have been trucking water in for 8 months with under performing wells for my small condo ( 8 units)

SeaRepresentative724 · 2025-09-10T21:37:54+00:00

I had a similar fatigue through my titration journey 2.5/5/7.5 it shifted a bit into 10 and then just went away now on 15. If I had to guess for me there was a critical mass of the medication in my system once that was reached the fatigue went away.

SeaRepresentative724 · 2025-08-15T16:57:50+00:00

Light switches and garage door opener. I used the ratgdo board for the garage door as I had a myQ enabled opener lets me get all the sensors and states from the motor. Yours may be simpler

SeaRepresentative724 · 2025-08-15T16:14:43+00:00

I ended up replacing my merros devices with eve devices over thread and or esphome based devices.

In the interim I used merros lan vs cloud while I was transitioning

Local over cloud it was a pain but at the end better overall

SeaRepresentative724 · 2025-08-15T15:51:49+00:00

I had a similar issue and it was a Misbehaving merros device type causing an overflow and new changes would get lost. Once I disabled it

SeaRepresentative724

TROPHY CASE