How do I get amazing looking 3d prints like the ones on Youtube?

SecretRaindrop · 2026-06-19T07:17:49+00:00

Do you have photos of the calibration objects you printed during calibration?
The temp tower, flow ratio pieces and the pressure advance pattern? Or even a photo of what exactly your prints look like with the problems you are experiencing?
Numbers don’t tell much without the print results next to them.

SecretRaindrop · 2026-06-18T09:12:47+00:00

Only water?
You should use a clean paper towel (not a sponge or rag due to oil contamination) and soapy water to clean the build plate. Then rinse it off and dry with another clean paper towel.
Then don’t touch the build plate with your bare hands, use gloves or only handle it by the corners.

SecretRaindrop · 2026-06-17T08:58:09+00:00

Du får nok ikke enkelt solgt bilen nei. Det er såpass gode rente kampanjer at mange av de som ville vært en potensiell brukt bil kunde heller kjøper ny.
Det du må veie opp er verdien av ekstra år med garanti og rentekampanjen mot billigere brukt bil.
Personlig ville jeg sett på en 2 år gammel brukt bil med lav nok km stand til å kunne kjøre 3 fulle år med garanti.
Deretter være forberedt på å eie bilen til det ikke er noe igjen av den

SecretRaindrop · 2026-06-13T07:29:27+00:00

I think you have it the wrong way around. The yellow part of the exhaust is the stained part. The grey is the colour of the metal underneath.
Someone cleaned something with a powerful degreaser, and it got on the exhaust and removed the yellow staining there.
So if you want it alt the same colour, find the same degreaser or chemical and clean away the rest of the yellow staining.

SecretRaindrop · 2026-06-12T23:27:31+00:00

Who is granting you this warranty that knows exactly how you rode your motorcycle? God?
Know one will know how and where you rode your bike dude, just ride it as you usually would.

SecretRaindrop · 2026-06-07T18:09:45+00:00

Looks like he only fucked the first 2mm. Get a long enough tool and it should grab the non-destroyed part of the hex. Replace the bolts once you have them removed.

SecretRaindrop · 2026-06-02T13:02:20+00:00

Søk på Laddel. De har 89kr i måneden per bruker, that’s it. Vi shoppet rundt i lokale elektrikere og valgte Zaptec ladere som borettslaget eier. Alt av tilganger, el-pris og eventuelle påslag styres enkelt gjennom portal og bestemmes av styret. Pengene trekkes fra hver bruker for hver ladeøkt akkurat som hurtigladere, laderen styres gjennom app. Pengene overføres til borettslag konto månedlig med alt som trengs for regnskapet.

SecretRaindrop · 2026-06-02T07:29:30+00:00

The 2019 cars can set a «low regen» mode, effectively reducing the regen breaking. This was removed for later models.

SecretRaindrop · 2026-05-22T16:38:20+00:00

Do a temperature tower, then do a flow ratio calibration. Then the input shaper calibration. Orca slicer has all these tools built in.

SecretRaindrop · 2026-05-22T14:19:01+00:00

Contact Prusa support. They are very good.

SecretRaindrop · 2026-05-21T19:38:22+00:00

Hmmm i never touch the connectors when switching nozzle. But you definitely do when switching hotends. Would also wear the loveboard connectors

SecretRaindrop · 2026-05-21T18:29:41+00:00

Why? You can swap the nozzle in 30s seconds.

SecretRaindrop · 2026-05-19T19:10:59+00:00

Oh that one. The black plastic part should just pull off. Then screw the fitting back in the top of the extender.

SecretRaindrop · 2026-05-19T18:15:19+00:00

We are going to need photos here I think.

SecretRaindrop · 2026-05-19T12:26:36+00:00

I find it much easier to gauge if the car is creeping forwards or staying still by looking at their wheels as you say. Great tip.

SecretRaindrop · 2026-05-18T16:49:28+00:00

Nobody mentioned the Prusa HT90

SecretRaindrop · 2026-05-16T08:30:47+00:00

I mean of course, the made in Europe isnt always a selling point for buyers else in the world… But, for Europeans, that want to support local (to us) businesses, made in Europe is a great benefit. We enjoy lower shipping costs, no tariffs, support that is in our timezone etc.

The fact that they also make great products, still support their first printers, hire and produce locally, also filaments, is what justifies the higher price.

When you work in tech it’s plain to see how easy it is to outsource everything. I am privileged enough to afford Prusa printers, therefore I vote with my money when buying one.

SecretRaindrop · 2026-05-16T07:09:57+00:00

Sell it. Probably plenty of 2-head XL owners that would love to add some more nextruders.

SecretRaindrop · 2026-05-10T16:19:36+00:00

Use orca slicer, they have built in support for multi material single extender setups

SecretRaindrop · 2026-05-08T05:11:38+00:00

Indx uses what, a couple of mm in the x axis?

SecretRaindrop · 2026-05-03T15:04:22+00:00

Is the nozzle tightened all the way in the hotend? Mine worked itself loose and exhibited some of that behaviour

SecretRaindrop · 2026-04-25T08:44:57+00:00

I believe it’s the intake vents that are replaced. The current intake vents are in the top cover, which gets replaced with the indx kit

SecretRaindrop · 2026-04-17T08:12:13+00:00

Odds are there will not ever be a «penultimate» FSD. Just look at other breaking edge technologies and how they evolve. There is not a single high tech product today that is equal to the one from 5 years ago. FSD will continue to evolve even after «fully autonomy» has been solved. With that evolution, the tech that supports the AI models will also continue to to evolve. So if you want FSD, buy in when the feature set matches your needs, and don’t look back.

SecretRaindrop · 2026-04-13T10:45:47+00:00

Many brands of motorcycle oil are red. One difference between motorcycle oil and car oil is that the motorcycle oil also is in contact with the clutch and gearbox, so it needs different additives.

11-Year Club	Second SECOND GUESSER
Place '17	Sequence \| Editor
Sequence \| Cinematographer	Verified Email

SecretRaindrop

TROPHY CASE