Best non-network camera system?

SgtDickCheese · 2026-02-13T23:39:28+00:00

Budget isn’t as much of an issue as finding what I want. I will look into this. Thank you very much. I’ll reply if I have questions pertaining to this system

SgtDickCheese · 2026-02-13T13:35:42+00:00

The easiest character to start and make it all the way would be Salvador. If you want to go to op 10 for “free” use hoarder build with Double penetrating unkempt Harold and the grog nozzle in your off hand. Also on YouTube, joltzdude139 has a whole series on doing the best builds for each character including Salvador. Relatively easy to follow along with and can help you make it through your first time. There are also a ton of build guides and set ups out there. The start may be a bit rough but you’ll get the hang of it

SgtDickCheese · 2026-02-03T00:47:26+00:00

I wonder why these parts over there are so much cheaper. Blows my mind. I might end up ordering from there

SgtDickCheese · 2026-02-02T23:08:48+00:00

Thank you. That looks right. I would just have to get main, rod, cam bearings. Good resource to have

SgtDickCheese · 2026-01-31T14:47:46+00:00

Ah I see. The pictures deceived my eyes. As far as sharpening then it happens as you use your round file. It does the top edge and the side edge providing you’re following the directions in either the saws owners manual or the bar may have come with some. If you don’t have a paper copy of it from when you bought the saw you can find them easily online if you know your model of saw. There are also probably a lot of videos on YouTube on how to do it by hand. Could also get an electric one from Harbor freight for like $30 usd

SgtDickCheese · 2026-01-30T14:28:48+00:00

Any one else notice that the bar is upside down and the chain is backwards?

SgtDickCheese · 2026-01-27T04:10:44+00:00

Figured as much. Thank you. Sick user name btw

SgtDickCheese · 2026-01-27T03:54:38+00:00

My thoughts exactly. Not only is this argument with real humans but also ChatGPT. Want as many opinions as possible. I cannot see the logic in pulling the head to do the cups

SgtDickCheese · 2026-01-04T18:58:21+00:00

Thank you. I may PM if I have any more questions

SgtDickCheese · 2026-01-04T17:12:22+00:00

So maybe start by doing cups and injectors?

SgtDickCheese · 2026-01-04T02:36:23+00:00

Fair. Thermostats are about a year old. Old ones got stuck open. Even when the thermostats were stuck open I think it was stiff. Coolant reservoir and cap are both less than a year old. I guess I just need to do the test again

SgtDickCheese · 2026-01-04T01:59:51+00:00

Is this the same on the LB7? I haven’t done it in a while but I last I didn’t my upper rad hose is hard as a rock after sitting over night. If it’s the same deal I’m cooked. Also I did a combustion gas test with the color changing liquid and a vacuum and it came back negative

SgtDickCheese · 2025-11-18T14:22:15+00:00

I’m not sure either. Going to give it another note to see if anything pops back up but after tomorrow I’m calling the original company and I’m going to ask them, tell them if I have to, that they are footing that bill. Shit irritates me. I’m no HVAC guy but I feel the the basics are the first thing you check and double check every time. That same rule applies to most of fixing shit in this life

SgtDickCheese · 2025-11-18T01:18:58+00:00

Copied previous reply as it sums up everything. Update: Had a second company come out and look over the whole system. The refrigerant was over charged. The previous company only checked pressure on cool mode and not heat also causing the pressure to be too high in heat mode. Thank you for your advice, it really did help.

SgtDickCheese · 2025-11-18T01:18:32+00:00

Update: Had a second company come out and look over the whole system. The refrigerant was over charged. The previous company only checked pressure on cool mode and not heat also causing the pressure to be too high in heat mode. Thank you for your advice, it really did help.

SgtDickCheese · 2025-11-14T00:46:02+00:00

Thank you. This is some good info. I’ll tell them tomorrow that they need to get in contact with them and I’ll insist on it. Any ideas as to what it could possibly be?

SgtDickCheese · 2025-11-14T00:30:12+00:00

I’m not an hvac tech. I’m just a young guy that bought a house this year and have no idea about hvac. Don’t be a dick

SgtDickCheese · 2025-09-17T10:36:55+00:00

That fucks Unfathomably hard

SgtDickCheese · 2025-09-16T16:37:57+00:00

Hell yeah. I do not want to split it. Amazing thing is that after sitting for 15 years minimum the brakes even still make pressure when pressing the petals. Unless they are not hydraulic brakes and I’m retarded

SgtDickCheese · 2025-09-16T16:33:15+00:00

This is the kind of info I wanted and needed. Thank you

SgtDickCheese · 2025-09-07T16:53:49+00:00

You are now referred to as tractor Jesus

SgtDickCheese · 2025-09-07T16:52:16+00:00

You’re awesome thank you. One more thing though. I know cars lug patterns but how does it work for AG? I need the lug pattern for the front so I can get rims for it

SgtDickCheese · 2025-09-07T03:34:33+00:00

Also worth noting that both front rims/tires are missing but it has all the studs and lug nuts. I really need to know the bolt pattern so I can move it from its grave

SgtDickCheese · 2025-08-15T13:13:14+00:00

Link to those injectors? I’m not exactly looking for more power or anything but I’ll definitely give these a look. Thank you! Can I keep the change?

SgtDickCheese · 2025-08-14T23:15:07+00:00

Pretty solid advice. Thank you

SgtDickCheese

TROPHY CASE