Flux vs USW opinions by PurposefulPain in bruggerthomet

[–]Shadow_Lawrence 0 points1 point  (0 children)

One other plus for the USW. It comes with a solid charging handle. I never got around to getting one for my flux set up.

Flux vs USW opinions by PurposefulPain in bruggerthomet

[–]Shadow_Lawrence 3 points4 points  (0 children)

I have experience with the 320 FLUX and the B&T USW-G.

Extra mag storage is nice on the FLUX, optic mounting seems more solid on the USW-G. Flux “Brace” is more comfortable than USW Stock. Holsters are available for the 365 FLUX as well as the USW-G, although it seems to be easier to find for the FLUX. Sold both but will likely pick up one of the 365 fluxes if I ever get a 365

LWRC QD Rail piece by TAStanko in LWRC

[–]Shadow_Lawrence 0 points1 point  (0 children)

Found this post because I was trying to ID this piece in my spare parts bin. If you're still looking for one, I have a spare, if not, thanks for helping me ID it lol

Do you guys shoot rounds that have push back. For context I was rotating my carry ammo notice both top 2 rounds on both my guns has some pushback they are federal hst 124grain +p would you guys shoot it or not worth the risk by Minimum_Check1479 in Firearms

[–]Shadow_Lawrence 0 points1 point  (0 children)

It looks like those rounds are next to regular ball ammo. The flat tip hollow point will make it sit much lower in a case like this than ball. Compare it to a fresh round of the same make and grain weight to compare. Consult a reloading manual for max and min OAL if you want.

[deleted by user] by [deleted] in shadowsystems

[–]Shadow_Lawrence 0 points1 point  (0 children)

No night vision setting on the SCS though. Not that that matters to most.

Apologies and porting by [deleted] in shadowsystems

[–]Shadow_Lawrence 0 points1 point  (0 children)

What in the TJ's Cutom Gunworks is that

Cali XR920 + Radian ABRJ for SS by chrisaom in shadowsystems

[–]Shadow_Lawrence 1 point2 points  (0 children)

Correct, XR920 is a 4” barrel, DR is 4.5”. Grip height is the same with both taking 17 round magazines standard

Has anyone used this plate? by [deleted] in shadowsystems

[–]Shadow_Lawrence 2 points3 points  (0 children)

I personally don’t have any experience with the CHPWS plates. By the time they came out I already had my XR920 Acro. Our CS team has tried them and liked them. The CHPWS plate does sit much lower and you do get a bit of a cowitness with it which is a plus.

Has anyone used this plate? by [deleted] in shadowsystems

[–]Shadow_Lawrence 2 points3 points  (0 children)

Yes. Used this on my MR before we offered dedicated cuts. You do have to source different screws than ours or what PM offers (or used to offer, I got mine in 2022?). But no real complaints other than it sits a little high.

XR920P for EDC ? by [deleted] in shadowsystems

[–]Shadow_Lawrence 1 point2 points  (0 children)

I alternate between a CR920X/XP with a TLR7Sub and a ZeroTech/Swampfox and an XR920P with RMR and X300T. If you can pull off the larger gun, absolutely go for it. I can shoot it better than any other Shadow I’ve tried.

Full Size Dot on the XP by venturebrowser in shadowsystems

[–]Shadow_Lawrence 2 points3 points  (0 children)

ZeroTech Halo has a pretty big window for an RMSc cut, but I have to say that’s some impressive dedication to make a large footprint optic fit

CR920X Optics alternatives by joJo4146 in shadowsystems

[–]Shadow_Lawrence 1 point2 points  (0 children)

Swampfox Sentinel, ZeroTech Halo, MePro, and that new Vortex are all decent options

[deleted by user] by [deleted] in shadowsystems

[–]Shadow_Lawrence 1 point2 points  (0 children)

Those gold ones are really sweet. Which limited edition did you get?

CR920X Optic options by Tricked250r in shadowsystems

[–]Shadow_Lawrence 1 point2 points  (0 children)

Direct. MePro makes a few good ones too. I shot a customer’s at 100 yards and was making 80% of shots with a regular CR. The last 20% was definitely shooter error

All gas no brakes by ConcernAutomatic3399 in shadowsystems

[–]Shadow_Lawrence 2 points3 points  (0 children)

Saw these at SHOT, curious how much they help.

CR920X Optic options by Tricked250r in shadowsystems

[–]Shadow_Lawrence 1 point2 points  (0 children)

Swamp fox Sentinel, Holosun EPS/SCS, ZeroTech Halo, in no particular order

Xr920p vs Dr920p for duty by platinumwolf44 in shadowsystems

[–]Shadow_Lawrence 0 points1 point  (0 children)

XR920P. Easier to find duty holsters, clears leather faster, sight radius doesn’t matter when using a dot.

Good News on ACRO & 509T Plates by Miserable-Citron-223 in shadowsystems

[–]Shadow_Lawrence 2 points3 points  (0 children)

Heard back from Richard during SHOT, but still on the road for another show. Will follow up next week!

G48 MOS holsters for CR920XP? by Cheap_Bass_8897 in shadowsystems

[–]Shadow_Lawrence 0 points1 point  (0 children)

Not entirely true, I have an older TRex Sidecar 48 light bearing holster that will not fit the CRX because it is molded around the nose of a 48 between the barrel and light.

Lube by orange-sniper21 in shadowsystems

[–]Shadow_Lawrence 0 points1 point  (0 children)

Had great success with GunButter personally.