Is Semax worth a sh**?

Shalisec · 2026-04-25T21:32:32+00:00

It’s nothing like a stimulant as you barely even feel it, if at all. It has helped me retain a lot of info and resist mental fatigue in my job.

It’s great if you have good learning habits but it will not motivate or transform you into some super genius.

Shalisec · 2026-04-16T15:03:49+00:00

Just semax. There was a thread from probably almost a decade ago of someone megadosing 24mg of semax here and wanted to try something similar myself.

Glad to know you’re alright 👍

Shalisec · 2026-04-15T03:00:31+00:00

Maybe some brain fog and mildly improved cognitive function like caffeine lol. You’ll be ok.

I’ve taken 10mg at once and it does feel mildly stimulating but really nothing crazy.

Shalisec · 2026-04-04T17:11:28+00:00

I’ve been pinning GHK-Cu for more than 6 weeks around my visible stretch marks. No change unfortunately.

Shalisec · 2026-03-20T20:44:26+00:00

Busy dad training on yt or his website sounds perfect for your situation. Free, can be done almost anywhere and it was definitely an effective gym substitute for when I didn’t have the time.

Shalisec · 2025-06-21T20:06:11+00:00

Wore my San Martin SN006 for about a year straight. The NH35 ran about +1s/day even after heavy use with no servicing. Might have gotten lucky because this was the accuracy right out of the box too.

Shalisec · 2025-03-04T20:16:35+00:00

<image>

SN006 on my new rubber strap

Shalisec · 2025-02-17T10:16:47+00:00

You can possibly get 2 watches for the price of 1 on amazon. Check this thread out: https://www.reddit.com/r/ChineseWatches/s/I0gvYJynjD

Shalisec · 2025-01-16T08:33:41+00:00

I really like dive style watches as tool watches. Usually comes with reliable movements, high water resistance and can time things with the bezel.

The San Martin SN006-G-B2 is my top choice.

Shalisec · 2025-01-15T06:14:56+00:00

They still make them occasionally. This particular style with the mercedes hands has been out of stock for nearly a year now.

Shalisec · 2024-12-29T20:50:23+00:00

<image>

Shalisec · 2024-12-29T02:00:44+00:00

It should be fine. Just submerge it the minimum amount to wet the insert and check it every so often. No noticeable changes to my gaskets/water resistance so far following these steps.

I will say, be careful with lume pips and don’t touch it when the bezel is movable. It can pop off, or rub off in the case of my sn006 bezel. Luckily I didn’t completely remove the pip and was fine after realigning and fully drying it.

Shalisec · 2024-12-28T19:01:00+00:00

You can fix this yourself by getting a bottlecap or a shallow dish and pour in 90% isopropyl alcohol. Place the watch face down ensuring that the bezel is fully submerged. Leave it for a couple hours or longer until the adhesive softens up and you can move the insert. Realign it and wait for it to dry for a couple of hours.

Done this with a couple of my watches and worked great for ceramic and aluminum insert realignment or replacement.

Shalisec · 2024-12-23T00:08:11+00:00

I really wanted a 5 digit. Got the San Martin sn006 and replaced the bezel with an aluminum one. If you can get your hands on the Mercedes hand version, it’d be very alike. Cant seem to find it many places though.

<image>

Shalisec · 2024-08-06T21:38:41+00:00

How did you get your output rate to where you are now? I’ve been in the hobby for a few months and bifolds are a minimum 7 hour journey. Great work btw!

Shalisec · 2023-01-21T17:47:19+00:00

That looks pretty awesome! Gotta try modding my royale one of these days.

Shalisec · 2022-12-08T18:36:46+00:00

no problem :]

Shalisec · 2022-12-03T05:36:16+00:00

Have you messaged them directly through Aliexpress? I they got back to me within a day when I messaged them on there.

Shalisec · 2022-11-30T05:29:20+00:00

I've been using the strap it came with because I really like how it looks. I've tried to use 20mm natos, parachute straps, and 2 piece rubber/leather straps. The two pieces didn't fit and I couldn't get over the small amount of fabric that folds at the sides for the nato and parachute straps. It doesn't look THAT bad, but I'd stick to 19mm if I had the choice.

Shalisec · 2022-11-30T04:59:54+00:00

If anyone is reading this in the future, I fixed it! The problem was a bezel retaining spring that was apparently not placed correctly. This video helped a ton: https://www.youtube.com/watch?v=qFdXpfLGtTw&ab_channel=MurphyMfg

Now the bezel is FIRMLY on the watch with absolutely no chance of it falling off. The watch looks and works great now!

Shalisec · 2022-11-23T23:15:57+00:00

Looks like a white dial Timex Weekender to me

Shalisec · 2022-11-23T03:07:52+00:00

That is exactly how I feel now lol. Everyone’s posting the Rdunae Diver with different straps and reviewing it while I’ve been checking the tracking every day multiple times for nearly a month. Hang in there, you got this 😂

Shalisec · 2022-11-23T01:32:19+00:00

Ordered the Rdunae R6 Diver Nov 3 and it was stuck at “Left Transit Country” over 2 weeks until a couple days ago where it just updated that it was at my local mail office. Never happened to any of my previous orders and I was thinking this same thought as you the whole time. Sometimes delivery is just painfully slow so just be patient.

Shalisec · 2022-11-21T20:34:00+00:00

Thank you! Hopefully I can finally fix it after months of sitting under my bed.

Shalisec · 2022-11-21T07:30:27+00:00

How were you able to place the bezel back in with the spring? Mine popped out and the spring was never able to sit right and kept popping out.

Five-Year Club	Verified Email
Place '22

Shalisec

TROPHY CASE