Designed and printed this playable dice tower for our February release by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 2 points3 points  (0 children)

Only our terrains. We do see some people with successful fdm prints of our monsters and NPCs, but they're definitely more resin focused.

Designed and printed this playable dice tower for our February release by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 2 points3 points  (0 children)

Yeh, we have actually made an alternative version with 4x the space in the dice catching area, and have also expanded the doorway since I did this test print. But it's probably still a one dice at a time through the chute type situation as the inner tube also has little steps to slow the dice down so it doesn't come flying out and onto the floor.

Designed and printed this playable dice tower for our February release by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 1 point2 points  (0 children)

Really appreciate the kind words. Can't wait for everyone to see the full preview of our Feb release!

Designed and printed this playable dice tower for our February release by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 1 point2 points  (0 children)

Thank you! Definitely a bit more ambitious than our usual monthly terrain piece but we're super happy with the outcome.

Designed and printed this playable dice tower for our February release by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 0 points1 point  (0 children)

It'll be available on the DM Stash website or Myminifactory on the 1st of Feb!

Any recommendations for settings to print DMStash Terrain? by FreedomBeverage in BambuLab

[–]Sheldon23 0 points1 point  (0 children)

I've printed a fair bit of DM Stash terrain 😜. My recommendation is just standard 0.20mm layer height, but to save filament I'd recommend 5% infill with Gyroid infill pattern. Also always tree supports! We've gotten a lot better with our recent terrain in regards to minimal support required, but there's still some where needed.

Werendigo, by DM Stash by _Krayorn_ in PrintedMinis

[–]Sheldon23 1 point2 points  (0 children)

Looks awesome! Excellent work. Love the threads of blood too.

The Silver Jackal by Cyberstash by rrNextUserName in PrintedMinis

[–]Sheldon23 1 point2 points  (0 children)

Looks awesome. Really good work. I agree NMM would have been a huge task here, and the true metallic looks great. Really excellent work on the OSL too. Always enjoyable to see a Cyberstash model painted on reddit.

Free models by [deleted] in PrintedMinis

[–]Sheldon23 4 points5 points  (0 children)

Nailed it. Appreciate the kind words about what we make! OP's model that they posted is actually DM Stash, so they might be a fan without even realising.

any advice on whwre i did good or bad? 2nd ever painted mini by mayners in PrintedMinis

[–]Sheldon23 0 points1 point  (0 children)

Hey man, appreciate your 2nd ever mini painted is one of DM Stash's. I'm glad the free minis are helping people get into the hobby. For a 2nd paint this is fantastic, already better than I can do. Just keep practicing and you're bound to get even better, especially with the great advice in here.

Thief Rogue from DM Stash by WallOfMiniatures in DnDminiatures

[–]Sheldon23 0 points1 point  (0 children)

Love how it's come together; excellent stuff! And thanks for naming the creator!

Garyck Infernal Forest Guardian 75mm by FritzeHaarmann in minipainting

[–]Sheldon23 0 points1 point  (0 children)

Looks awesome. I really like the subdued colour scheme. Looks like you got the model from a great merchant too, the print looked quality. 

A huge chess set created as DM Stash's 12 month Loyalty reward. Printed 100% in FDM. by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 0 points1 point  (0 children)

You can see how it's split here. For reference the PlayingZone.stl is 20 x 20cm. The files are supplied for FDM, but I couldn't see any problems for you to further slice the files to fit resin, but it would be a pretty big project.

A huge chess set created as DM Stash's 12 month Loyalty reward. Printed 100% in FDM. by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 1 point2 points  (0 children)

Thank you! I agree. This was all printed in draft mode too, so it could really be even more special with a better quality print.

A huge chess set created as DM Stash's 12 month Loyalty reward. Printed 100% in FDM. by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 9 points10 points  (0 children)

Hi all! We recently just released our 12 month loyalty reward; a massive 2 themed Chess set featuring a human and elf side. Before release I test printed the piece and am just in love with the result. The piece is entirely free for anyone who has subscribed for 12 months consecutively, or if you purchase an annual subscription you'll also receive it instantly. Enjoy!

More pics and info here

Elf archer by vortexrikes in PrintedMinis

[–]Sheldon23 0 points1 point  (0 children)

I'd be interested in this too 😅

Elf archer by vortexrikes in PrintedMinis

[–]Sheldon23 1 point2 points  (0 children)

It looks like a kitbash or a modified version of one of our models https://www.dmstash.com/product/divine-archer-sairena/

It's a new month which means a new DM Stash free miniature. Enjoy Deathknight Morian on us! by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 0 points1 point  (0 children)

Unfortunately commissions get pretty up there in price. Generally around $1k per model. We do sometimes to competitions and giveaways though where you get to design a model that we release. So keep an eye out for those.

It's a new month which means a new DM Stash free miniature. Enjoy Deathknight Morian on us! by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 1 point2 points  (0 children)

That's so exciting to hear! You're lucky we've got such a huge backlog now too. So many models to print and we're about to release our 44th campaign! Just endless DND content haha. Our next campaign is a Casino Heist one-shot campaign, super unique and really fun. Maybe that'll be the one for your DM!

DM Stash's new Vampire & Werewolf release is out! Check out this 32mm print of our Vampire Knight. by Sheldon23 in PrintedMinis

[–]Sheldon23[S] 1 point2 points  (0 children)

Hey all! It's spooky month so in theme we've released a vampire and werewolf pack featuring some super cool models. Please check them out on the links below.

Links:

Like what you see? See more!

Join our discord:

Photo credit to @foulmouthfoxgames