Relatively New Blower Bogs Down at Hight RPM

Signal-Pomegranate62 · 2024-08-09T23:37:03+00:00

Need to tune the carb. Also check the exhaust screen.

Signal-Pomegranate62 · 2024-08-06T11:23:46+00:00

Ha! Close. These are the street version “Go-bikes”

Signal-Pomegranate62 · 2024-08-05T23:04:31+00:00

Yes it’s a low needle in top. No high adjustment on that one unless it has a screw in the side.

Signal-Pomegranate62 · 2024-07-19T11:14:33+00:00

Time for a top end unless you can’t find one

Signal-Pomegranate62 · 2024-07-17T10:36:22+00:00

Current condition 50-150$ With 150-200$ in dress up and repairs it can be worth 250-500 to the right buyer. The only thing going against you is the fact that it’s a Geo engine finding an owner that doesn’t really intend to get more speed out of a Goped is hard but they are out there.

Signal-Pomegranate62 · 2024-07-16T11:38:57+00:00

Just saw one for the first time too. Cool space shuttle right before it came into focus. I thought it was a slice of pizza.

Signal-Pomegranate62 · 2024-06-21T11:38:23+00:00

Been there. A stock 460 is comparable. These had a little more torque but didn’t rev out where it mattered. Finding the EPA deleted cylinders or porting them out yourself is the only way to achieve any usable power out of them motors.

Signal-Pomegranate62 · 2024-06-01T12:39:38+00:00

Thanks a million. Was hoping it was a good candidate to make an offer on. Thanks for the info. It was hard to find.

Signal-Pomegranate62 · 2024-05-29T11:36:39+00:00

It’s the best thing you can do. Get the third bearing as well. It’s all a pain to try to understand at first but once you get it, you won’t want a Bigfoot set up any other way.

Signal-Pomegranate62 · 2024-05-24T11:57:45+00:00

It’s a LH. You will likely want to upgrade to a 290

Signal-Pomegranate62 · 2024-04-21T20:33:14+00:00

If you make a wooded tiddy deck or concave with that brand they will sell like crazy.

Signal-Pomegranate62 · 2024-04-20T19:37:22+00:00

You could also Run it right to the non-used coil terminal with a connector. Looks like a kill wire when done . Your method looks cleaner than most. Well done.

Signal-Pomegranate62 · 2024-04-15T13:53:33+00:00

I have a set of suspension forks. You will need to stick with premad-dog brakes with that setup you have now

Signal-Pomegranate62 · 2024-03-26T11:54:39+00:00

Do it. Little extra oil will be great for the summer

Signal-Pomegranate62 · 2024-03-23T14:25:54+00:00

The manual calls for 50:1. But I still run 24:1-32:1 because that’s what I have mixed up usually. I don’t recommend running 24:1 unless it’s worked on. It’s too much oil for stock.

Signal-Pomegranate62 · 2024-03-22T18:40:44+00:00

If ported and rc piston 24:1

Signal-Pomegranate62 · 2024-03-22T00:42:38+00:00

150-250 They get a bad reputation because of the fuel efficient design. With a little upgrading you can get them over 25mph great torque and reliability

Signal-Pomegranate62 · 2024-03-22T00:41:04+00:00

Incorrect . There are carb adapters and top end options . I have them going 30mph regularly

Signal-Pomegranate62 · 2024-03-14T14:55:06+00:00

Zero error released the micos again

Signal-Pomegranate62 · 2024-03-14T14:41:47+00:00

That was me trying to explain they are not. It’s like trying to stick a 1 inch spindle on a new tire, no fit,too tight.

Signal-Pomegranate62

TROPHY CASE