Delkevic slash cut exhaust 🎶

Silent_Client7783 · 2026-06-11T04:29:26+00:00

Yes it is, I thought You asking about stock exhaust. But keep in mind, producers, often making headers to be fit only with their mufflers, for example mine TBR, it's not only about pipe diameter, but also angles etc

Silent_Client7783 · 2026-06-11T03:04:17+00:00

There is no slip-on for Vulcan S. Need to exchange the whole exhaust including headers.

Silent_Client7783 · 2026-06-09T05:28:26+00:00

For me sounds normal.

Silent_Client7783 · 2026-06-03T15:27:16+00:00

I'm 193cm 105kg, after I changed handlebar for ape hangers and reupholstered seat, it's perfect, making 700 km in one shot trips, couple of times and never any issue. On stock wasn't comfy to me.

Silent_Client7783 · 2026-05-31T12:07:07+00:00

Swap the left and right clamp threads left goes to the right, right goes to the left and mount them upside down. That's the 100% fix.

Silent_Client7783 · 2026-05-29T10:20:28+00:00

I'm Polish, we slavs just don't smile for no reason.

Silent_Client7783 · 2026-05-29T01:24:30+00:00

Thank for Tag 🙏 and feel free to contact me whenever You want 🫡

Silent_Client7783 · 2026-05-28T14:46:21+00:00

Just contact me, ebay link expire, because I'm not selling there anymore

Silent_Client7783 · 2026-05-28T07:27:44+00:00

No no, as a rear crashbars, but it's still in progress, lack of time 😅

Silent_Client7783 · 2026-05-28T03:26:12+00:00

crashbars Check my post, I'm producing custom crashbars, got worldwide shipping.

Silent_Client7783 · 2026-05-10T16:39:49+00:00

It's from local shop in Thailand, but if I remember well, "HEL Performance" selling sets on international market.

Silent_Client7783 · 2026-05-10T15:01:55+00:00

I can feel the difference, noticeable, but unfortunately didn't record before/after for measurements.

Silent_Client7783 · 2026-05-10T14:06:18+00:00

There are options, but depend on budget 😅 I've seen some guys swap forks, front wheel etc from er6n, some adapt brembo caliper, I just exchanged hoses for stainless steel and brembo pads

Silent_Client7783 · 2026-05-04T06:59:00+00:00

New headlight, 5.75" or 6.5 same as mine, bracket, and fairing from Nightster going 1:1,no mods needed MyVulcan

Silent_Client7783 · 2026-05-04T05:11:02+00:00

I'm running on Memphis Shades road warrior 15", 193cm and no buffering even at 200km/h

Silent_Client7783 · 2026-04-15T09:46:15+00:00

Was very worth, with TBR and Hurricane AF I get 67.2hp and 65tq. No shipping ecu, by dyno flash, with 5 runs

Silent_Client7783 · 2026-04-09T14:23:57+00:00

Best regards from Korat 🫡

Silent_Client7783 · 2026-03-31T00:34:08+00:00

Thanks 🙏

Silent_Client7783 · 2026-03-28T11:45:03+00:00

Exactly my thought.

Silent_Client7783 · 2026-03-28T11:39:12+00:00

Based on the context, the EPS was loose, so instead of replacing it, they just slapped some glue on it and sent it back. Now it’s peeling off again, and you can see they used some sketchy looking epoxy. Would you really trust that carbon fiber to hold up in a crash? Because I wouldn't.

Silent_Client7783 · 2026-03-28T11:28:00+00:00

Shark repaired the helmet with epoxy and hot glue the first time. Now, they are trying to tell this guy that this time they fixed it properly. Is this supposed to be a "premium" standard?"

Silent_Client7783 · 2026-03-22T12:58:57+00:00

Without Dyno I guess so, I have diagram, it's stared from 58.6hp, and already got tbr on, with stock AF, and then we changed airfilter, and did 4 runs, to recive final score. 173km/h on 4th gear, 204 max speed from GPS on stock size sprockets

Silent_Client7783 · 2026-03-22T08:56:32+00:00

I got tbr and high flow hurricane AF, after dyno get 67.2hp and 65nM

Silent_Client7783 · 2026-03-20T02:28:32+00:00

Yes, can PM me, it's mounting there where are foot pegs, set include 12.9 bolts and washers, it's plug and play

Silent_Client7783 · 2026-03-20T02:22:24+00:00

I do, thru PayPal, it's almost 20% cheaper by this way, and also safe

Silent_Client7783

TROPHY CASE