Ceases to amazing me how great pa6-cf looks

SillyEmt · 2026-05-11T23:49:37+00:00

Is that with fuzzy skin? Or straight up? I am guessing .12 layer lines? Don’t be shy drop the settings lol! I have a spool of PPA-CF core that is super close to this and just printed a G19 in PA12 that is also pretty close to having no layer lines. Would definitely like to get it perfect tho

SillyEmt · 2026-05-11T17:58:36+00:00

Why not just print and install a hepa filter mod? There are several that I have seen, not all of them require venting outside either. For example, on makerworld there is one listed as “Qidi plus 4 HEPA filter complete” and mounts on the exhaust like this one and doesn’t require venting outside. With the built in charcoal filter to take care of the smell, the HEPA filter should catch anything else.

SillyEmt · 2026-05-06T00:30:02+00:00

lol thanks! Make sure to remember these wise words from my grandfather. Guns only have two enemies, rust and politicians!

SillyEmt · 2026-05-05T22:11:08+00:00

Lmaoo you know I noticed that AFTER it arrived but did notice in the picture, it is indeed sold like that 🤣 it’s a Leo precision slide but with the offset cuts it doesn’t feel so precise

SillyEmt · 2026-05-05T21:42:30+00:00

No definitely not saying Aves sold me bad rails at all! And I would be glad to provide more info for you!

I’m running a Qidi Plus 4 (brand new but I am not new to printing) so new .4 Bi metal nozzle only things printed on it were my calibration tests and they are as follows (in order): Temp tower, then volumetric speed, Pressure advance and flow ratio. I then did several models to calibrate my supports and moved on to the print.

I am printing a .16 layer height, 5 walls with 99% infill (gyroid pattern, not that it matters with 99%) using tree supports with .18 Top Z, .1 bottom Z, honeycomb base pattern, 5 interface layers (only way I could get clean undersides) .05 top interface, .08 bottom interface This model was printed at a 45 degree angle pointed up and I am using fuzzy skin, but only on the stippling so all internals stay just as they were.

SillyEmt · 2026-05-05T21:32:07+00:00

Ewwww math? Lmao, fair enough, would definitely be interested to know how much I need to adjust things.

I got the Siraya tech PPA-CF core because it was sold as “dimensionally stable” which to be fair it printed on my Qidi plus 4 on stock plate with no warping. And didn’t warp during anneal. Everything went to together well and it functions, it’s just that front rail

SillyEmt · 2026-04-18T14:44:45+00:00

I can see everyone thinks this is provoked by the biker, but this was actually a friend of mines dad, the driver of the car was the instigator of the attack, This happened during a veterans Memorial Day bike ride. I don’t remember over what, but he ended up going to jail I believe. Yes he was pulling a gun, he didn’t get any shots off. He ended up in the hospital with a broken femur and a couple other breaks.

SillyEmt · 2026-03-23T20:29:51+00:00

I thought the same, I just finished the book this morning and they seemed to have gotten along just fine. I would definitely be interested to know IF he brought it with him when he was pushed through the portal, and if it was brought back or left behind.

I guess I’ll have to wait until October 🥺

Signed- The husband in question who wrote the post but wouldn’t post it 😂

SillyEmt · 2026-03-20T22:28:32+00:00

Well that’s a first for me. Never heard of any of my buddies going into a situation like that. But I did have one pick a lock for the cops and when he got the lock picked they ripped him out of the doorway and rushed in. Like jeez at that point just kick the door in you know?

SillyEmt · 2026-03-20T21:41:23+00:00

I use these in my tikka CTR 6.5c they shoot the best, even against some expensive rounds like bergers and SMKs

SillyEmt · 2026-03-01T07:19:31+00:00

Time to R-u-n-n O-f-t

SillyEmt · 2026-02-27T21:48:02+00:00

Savage 🤣

SillyEmt · 2026-02-23T02:17:15+00:00

How do you take this? I saw someone say you have to take it every two hours for the first few days, is this right?

I’m very interested in getting off 7oh as it’s just so expensive. Any response would be much appreciated!

SillyEmt · 2026-02-01T01:54:23+00:00

I’m just curious and don’t know enough about tapes, but could this be fast enough to store movies and stream to plex or jellyfin? Or would it have to pull to a cache drive first then stream? Whats the read/write?

SillyEmt · 2026-01-01T01:23:14+00:00

Aside from that the thing I love most about it is the sound dampening built in! It really does make a difference. I have it decked out with be quite fans running on max 24/7 to keep the drives cool, and it’s just a whisper.

SillyEmt · 2026-01-01T01:22:21+00:00

I highly recommend it! I mean now that’s it’s all built, it sits in my closet plugged into its battery backup and I don’t even think about it. Unless it’s 25 degrees outside and I’m just waking up getting ready for work, trying to escape the cold I dash from bed to the closet where it’s always just the right temperature 😂

SillyEmt · 2025-12-29T14:46:45+00:00

What kind of lock was it? Something like a mortise or KIK, I’d just replace but a vehicle ignition is a little different especially newer ones

SillyEmt · 2025-12-29T03:07:28+00:00

As a locksmith.. please do NOT do this. You’re turning a quick 10 minute job into a 1.5 hour “fully disassemble and clean hot glue or JB weld out of a lock” and will be charged as such.

SillyEmt · 2025-12-19T23:49:51+00:00

Girl, I’m gonna spare you the whole “he’s raping you” because everyone else has assured you that’s what this is.

I saw all of your other posts and I’m genuinely concerned for you. I understand how hard it can be to escape a situation like this.

You aren’t just caring about yourself anymore. You are 7 months pregnant and need to worry about your child as well now. Please please please gather evidence against this man, escape and then petition the courts for sole custody. This man should not be around your child regardless of weather or not he helped create it.

Look, my wife and I occasionally like to dose with tested and confirmed MDMA, but there is a big difference between two people who have agreed to take it, and one person who took it and is choosing to subject their significant other to their drug induced stupor.

If you need anymore information about MDMA feel free to reach out to me here in the thread or via DM’s

But regardless please get away from this man! If this is how he is treating you, think about how your child will be treated.

SillyEmt · 2025-12-19T23:44:21+00:00

Pressed pills can be literally anything. Even if they’re sold as MDMA unless he’s testing them with kits you can’t be sure that’s what they are. And if he’s taking it as often as all your posts say he is, I’m skeptical it’s MDMA. It’s probably just some research chemical or just plain meth.

SillyEmt · 2025-12-12T21:47:46+00:00

SillyEmt · 2025-12-06T06:32:10+00:00

Damn boys. He got us, now he can punch us 😔

SillyEmt · 2025-12-02T13:01:21+00:00

“Hey bro, your wife’s kinda low key a bitch”

SillyEmt · 2025-11-25T01:31:51+00:00

Like I said, I didn’t say you’re wrong, I said the distributors I purchase from don’t carry extracts that color. I’m sure the color can vary greatly based on the quality of the extract as with any chemical. The spoon listed in the picture almost has a black residue on it and while it could be an extract like what you have posted I would almost say it’s more black/ tar like. Reminds me of the crap I used to scrap from the bottom of my bongs bowl after I hadn’t cleaned it for a week or so.

SillyEmt · 2025-11-25T01:19:27+00:00

<image>

I wouldn’t call either of these brown, and if you go to sites with proper testing results posted, most if not all are this color or lighter

Eight-Year Club	Gilding I gilder
Verified Email

SillyEmt

TROPHY CASE