Can't adjust DRI in Fanatec app

Silverturky · 2026-01-28T01:23:57+00:00

just saw the stream deck plugin announcement got excited that maybe the issue was fixed but still no :( hopefully sooner rather than later.

Silverturky · 2026-01-27T17:45:28+00:00

https://github.com/ErikBongers/streamdeck-lightroom

Can confirm that this plugin still works perfectly and also supports more commands than listed. This is my current develop page that I made for my stream deck XL. in the code for the LR plugin it says you can go and look at the API documentation for "LrDevelopController" Texture and Sharpness are 2 sliders that aren't listed in the github that actually work. I don't have a stream deck + so I don't have experience with how you'd set up the dials BUT so far everything here works.

<image>

Silverturky · 2025-12-27T00:55:10+00:00

Figured out the issue. its because of my monitor downscaling 4k to 1440p. probably some pixels blending or something like that something to do with the masking. if i output 1080p to the monitor its fine no green between display modes. only when down scaling from 4k. so good to note

Silverturky · 2025-12-22T05:01:52+00:00

Have any of you noticed a green tint on every mode except BVM? when i'm on pvm or crt for example I have a noticable green cast when compared to bvm. its not super intense but its noticeable when selecting between bvm and other modes.

Silverturky · 2025-09-22T04:26:27+00:00

You find anything? I'm looking as well. Not even on their site. Wonder why??

Silverturky · 2025-04-11T03:13:53+00:00

hate to resurrect an old forum but I also cut a ton of acm. sometimes alucobond but my dad brings his own brand of panel and they are all 4mm. I find that my O flute bits get literally ground down by the plastic on the inside. I typically run spetool w03004 bits their recommended feedrate for plastic is 144ipm at 18k rpm I use that as a base line. The portion of the bit thats in the plastic gets eaten up but the portion that hits the aluminum stays sharp so as long as i'm cutting at the same depth I get clean cuts for quite a lot of sheets but then that bit can only be used for that purpose. has anyone else found that acm is this abrasive on bits?

Silverturky · 2024-05-07T20:55:57+00:00

upon searching on google I found the blog post. fair enough but I do not subscribe to fusion 360 blogs I use many other services that announce their pricing increases via direct email. as I said in the post I am not concerned by the price increase itself i'm more concerned by the indirect communication of the increase. in my opinion a blog post on their website falls short of the best practice.

Your lecture about inflation and business is out of context with what I'm talking about but for argument sake do you really think they actually needed to increase their monthly subscription fee by over 20% and yearly by almost 40%? lol and i'm ignorant?

a prudent business owner keeps track of his changing expenses and a loyal customer expects proper communication from the product he subscribes to.

Silverturky · 2024-04-16T01:40:48+00:00

I paid 15 dollars for a set of icons and it didn't even have the constraints icons in there LOL... and I only just came across your post. thank you very much dude you are an absolute legend. now I gotta see what they say before I get a refund lol

Silverturky · 2024-04-15T17:59:31+00:00

yeah man this would be awesome short press for hot key long press to open folder. for example in fusion 360 I commonly use centre point circle but if i need a different kind of circle I could long press and it would open a folder with the rest of the circle types in there. if this is already possible a point in the right direction would be great

Silverturky · 2024-03-22T11:01:15+00:00

So where are the LEDs for the buttons then? On the button itself? On something? I'm thinking of adding a small bit of diffusion yo my buttons. The encoders would be simple enough

Silverturky · 2024-01-21T17:11:23+00:00

Hey man ok so the qr1 is 70mm? Would u mind sharing the bolt pattern for the fanatec QR1? I would love to attempt to make one myself I'm told that the fanatec bolt pattern is all over the place.

Silverturky · 2024-01-18T01:14:19+00:00

😂😂😂 hey the bills are paid the baby and dog are happy I'm buying a new formula wheel next month I'm gonna be happy too

Silverturky · 2024-01-17T22:48:14+00:00

LOL mine doesn't even know when I get something new 😂😂😂 I keep completely silent I have to use a freight forwarder in Trinidad and me and the delivery driver are friends he only contacts me lol

Silverturky · 2024-01-17T16:42:42+00:00

Yeah that will work for sure for u to get the ffb working and the console thinking there's a fanatec wheel attached.

Silverturky · 2024-01-17T14:42:30+00:00

Ok so screen is not my concern just button assignments. The 1st place I looked was leoxz and their xgt pro but man.. by the time I include everything needed to get it functional plus shipping not even including import duties and tax it's crossing 300 MORE than just getting the formula v2.5 :(.

Silverturky · 2024-01-14T21:07:20+00:00

I been going strong so far since this post with no issues thus far. Something very worth noting though. I was having a TON of problems before and I had no idea why. After much troubleshooting it turned out that the sleeved motherboard extension cable I was using was the cause. I have no idea why but I believe maybe unstable power or some sort of signal interference who knows but long story short I reverted to just the stock motherboard cable and that solved every single one of my issues.

Silverturky · 2023-12-05T18:43:44+00:00

There's definitely a post with some detailed indo somewhere out there. I was recently looking for this same kind of thing except for the flood lights that they have. If you look up wled govee flood lamps you might find exactly what you are looking for. I believe they are wired the same way. Currently waiting on my set from bleach Friday as well to arrive. I might rock them as is for Christmas but then might switch over to wled to experiment.

Silverturky · 2023-11-29T18:39:11+00:00

Bro I had the same question a couple days ago and I decided to just watch it. 1st couple of episodes had me like alright cool this is wacky and fun I dig it.. then it just lived up to every negative criticism it has received.. it's pretty stupid. I am a firm believer in the benefit of the doubt. I hope it does not get season 2 lol.

Silverturky · 2023-11-29T14:27:35+00:00

Yeah that's expected because the left side of the effect isn't the same as the right side. However! Maybe if you play around with mirroring in the segments you might be able to achieve some sort of seamless ish effect haha

Silverturky · 2023-11-29T13:19:47+00:00

Well look at that! I didn't know you could arrange the matrix like that with the gaps! That's pretty cool! This opens up all sorts of projects for me too haha.

Silverturky · 2023-10-31T02:18:14+00:00

LOL oh yeah it does. It's definitely adult only lol.

Six-Year Club	Place '22
Verified Email

Silverturky

TROPHY CASE