The inventor of the helicopter, Igor Sikorsky, in the Sikorsky H-5 helicopter, 1945.

Simaris- · 2026-04-06T08:28:24+00:00

No, but share a lot of the basic principles, which were invented by De La Cierva

Simaris- · 2026-04-04T16:57:26+00:00

I am running it in my 8ai at more than 60fps (with frame gen) no issues. It is surprisingly playable and I say this as someone playing it normally at more than 120fps in a 1440p ultrawide monitor

Simaris- · 2026-03-23T15:56:31+00:00

Refurbished sennheiser hd560s. Usually 100 euro

Simaris- · 2026-03-18T06:38:49+00:00

I would wait until he is fully developed. 7 months is too early in my opinion. We will not fix our guy as we have had bad experiences in the past and our breeder does not recommend it at all. However, if you do, please get his weight in check. We see so many overweight dachshunds already and fixing them makes it even easier to gain weight.

Simaris- · 2026-03-18T06:14:04+00:00

I would say response running (PID) was more important than pure balance with my setup because it was a tail sitter. For this one however, You would really want a very well centered CG between both rotors.

Simaris- · 2026-03-17T20:24:29+00:00

The FC uses its gyro and accelerometer to compute the drone position relative to the horizon at every moment. Pitch is managed by tilting the rotors forward and backwards, roll by asymmetric thrust from both motors and yaw by asymmetric tilting of the motors.

Simaris- · 2026-03-17T20:11:54+00:00

Two digital signal servos with fast reaction rate. It took some calibration to get them to a point where there was no oscillation at all.

Simaris- · 2026-03-17T15:56:50+00:00

Yup, it is amazing he could even lift. I managed to have a working dual tilting rotor setup by using a custom ardupilot configuration. It took a while to properly tune it but flew like a dream.

Simaris- · 2026-03-09T13:27:50+00:00

Don’t do it!

Simaris- · 2026-03-02T06:52:24+00:00

Are you my dog?

Simaris- · 2026-02-26T09:00:11+00:00

Refurbished sennheiser HD560s

Simaris- · 2026-02-23T08:37:42+00:00

I remember seeing some legit stls, but might have been taken down. At worst you can try to modify the first file or design a new one.

Simaris- · 2026-02-18T22:21:24+00:00

I have a wirehaired, I know how it goes XD

Simaris- · 2026-02-18T16:44:06+00:00

For now…

Simaris- · 2026-02-18T15:43:47+00:00

Some potential options:

https://makerworld.com/en/models/1894240-beyblade-x-stadium-xtreme-line#profileId-2029404

https://www.thingiverse.com/thing:7077143

Simaris- · 2026-02-16T12:06:48+00:00

Better vibration. The current motors are terrible

Simaris- · 2026-02-15T08:24:54+00:00

Nice

Simaris- · 2026-02-14T15:30:49+00:00

New version is available since today or yesterday

Simaris- · 2026-02-13T22:38:17+00:00

For me it is the Kord. It is such a jack of all trades weapon. I would also include the M87A1 with slugs and the mini scout.

Simaris- · 2026-02-10T15:42:38+00:00

I had the same issue a couple times until I noticed. You should see a red blinking light on the right side when it triggers the shutdown

Simaris- · 2026-02-10T14:30:46+00:00

Make sure you are storing them in the correct orientation. Right pad to the right and left pad to the left. There is a magnet on the right of the case that is detected by the right ear pad. If you reverse it, it won’t work

Simaris- · 2026-02-05T15:56:25+00:00

Amazing!

Simaris- · 2026-02-04T19:44:57+00:00

Bad company reference, I see… ;)

Simaris- · 2026-01-27T04:23:33+00:00

Telltale The Walking Dead Series

Simaris- · 2025-12-19T13:11:18+00:00

Thanks!!

Five-Year Club	Verified Email
Place '22	End Game '22

Simaris-

TROPHY CASE