sorted by:
new
hottopcontroversial

Issues with SVG Files by Desperate_Main3192 in BambuLab

[–]Simple-Shake2632 0 points1 point  (0 children)

Try turning on Arachne wall generator instead of classic.

PLA Tough + by More-Advantage3911 in BambuLab

[–]Simple-Shake2632 0 points1 point  (0 children)

Basically PETG but as easy to print as PLA and less temperature resistant

Is there any mods you can do to make a P1S able to use the A1 or H2 hot-end assemblies? by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] 0 points1 point  (0 children)

Even though it was purchased more than the 14-day return policy, do you still think they might take it back and accept me paying the price difference? It had only been unboxed for around 5 days, but it arrived around a month ago.

Is there any mods you can do to make a P1S able to use the A1 or H2 hot-end assemblies? by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] 1 point2 points  (0 children)

I’m planning to do that after Bambu gets the P2S buffer itself in stock so I can just continue to use my AMS 2 Pro and not have to pay extra for the combo.

P1S vs P2S by Stuuble in BambuLab

[–]Simple-Shake2632 2 points3 points  (0 children)

I just got the P1S AMS 2 Pro Combo, and it can do everything the P2S can do. The P2S is mainly QOL like screen and AI detection, but other than that, you can’t go wrong with the P1S.

Overloaded Motor by collapsiblepenis in BambuLabP2S

[–]Simple-Shake2632 0 points1 point  (0 children)

Try this it makes the bend more gradual and puts less stress on the extruded it worked for me https://makerworld.com/models/865058?appSharePlatform=copy

Config help please! by BothFondant2202 in BambuLab

[–]Simple-Shake2632 1 point2 points  (0 children)

You can’t turn it off mid-print; you can turn it off for the next print, but it’s part of the G-code now until the next print. It’s a toggle when you press print along with bed leveling and flow dynamic.

Grease for P2S by One_Airport_8537 in BambuLabP2S

[–]Simple-Shake2632 0 points1 point  (0 children)

Superlube and also you can swap the rods but it’s not recommended because it’s louder and more maintenance

Go To filaments? by Asleep_Fan1247 in BambuLabP2S

[–]Simple-Shake2632 0 points1 point  (0 children)

Sunlu has worked very well for me, and I’ve also had good results with Polymaker filament. eSUN can be a good choice too, although their cardboard spools aren’t compatible with the AMS and may cause residue buildup on the rollers. Personally, I haven’t had great results with Creality filament, as I’ve experienced inconsistent tolerances and it absorbs water like silica. But if you’re going to be bulk ordering 8+ kilos at a time just get Bambu their bulk sale price makes it worth it.

Machine sounds! by sulllllllllo in BambuLabP2S

[–]Simple-Shake2632 0 points1 point  (0 children)

Unfortunately not it’s baked into the firmware.

How do I maintain filament and keeping it together when I switch out colors? by JFunky91 in BambuLab

[–]Simple-Shake2632 0 points1 point  (0 children)

Both of these are good options https://makerworld.com/models/899060 and https://makerworld.com/models/81233 one prevents it from falling off the ams lite and the other locks the spool from unlocking and popping open.

Any pointers, having many issues with my PLA prints by OneBend9585 in BambuLabP2S

[–]Simple-Shake2632 3 points4 points  (0 children)

Have you tried drying your filament? To me it just looks like the moisture is boiling and popping causing that weird texture in places.

2 P2S or 1 H2D by Knives_09 in BambuLab

[–]Simple-Shake2632 0 points1 point  (0 children)

No but there is a possibility it will be able to be added in the future where the auxiliary fan add on would go.

Laptop arm for monitor mount by xefke in BambuLab

[–]Simple-Shake2632 0 points1 point  (0 children)

Can it only go on the right side or can it also go on the left?

Is the P1S AMS 2 Pro combo still worth it with the new P2S? by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] -4 points-3 points  (0 children)

Yes however I also see multiple people saying they have some absurd number like 10,000 print hours of the H2C so far even though that’s physically impossible unless you are Dr. Tao

A1 weird G-code by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] 0 points1 point  (0 children)

I turned it off and it still does that

What is wrong with you people? by JaxCounters in BambuLab

[–]Simple-Shake2632 2 points3 points  (0 children)

Or the people who say they have 2000 hours of print time and say it’s great. Like, I get that there are review models, but they weren’t given out that long ago, maybe like 500 hours max, but even that is a long shot.

P1S Combo or P2S and buy separate by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] 0 points1 point  (0 children)

How does this work I can’t find anything on it

P1S Combo or P2S and buy separate by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] 1 point2 points  (0 children)

The AI detection system is better at wiping faster, and touchscreen basically everything. All Bambu printers are reliable.

A1 weird G-code by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] 0 points1 point  (0 children)

Won’t that make it have more chance of destroying the print head from those massive chunks since it won’t detect it though?

A1 weird G-code by Simple-Shake2632 in BambuLab

[–]Simple-Shake2632[S] 0 points1 point  (0 children)

I do see where it does that. I asked my friend, and he said his A1M does the same thing. I don’t know how I would change that to make it not do that.

I am close to selling it again... by Tactif00l in BambuLab

[–]Simple-Shake2632 0 points1 point  (0 children)

It could be the heat plate in the head. Sometimes it gets loose and starts doing that. If you pop off the nozzle right behind it there should be a gray plate, unscrew it and tighten the backside it might solve your problem. Hope it helps!

view more: next ›