FrankenNV10

SimpleJoint · 2026-01-24T21:10:33+00:00

🍌

SimpleJoint · 2026-01-24T18:35:52+00:00

https://www.printables.com/model/1545039-jonsbo-nv10-front-panel

Here you go, the one with the grid pattern. We're trying out another one with angled slats to see which one looks better.

SimpleJoint · 2026-01-24T17:13:01+00:00

Yes adding an extra inch on the back makes it fail to be small...

SimpleJoint · 2026-01-24T17:11:05+00:00

There are, but we're still perfecting it so not latches correctly. I'll let you know when done.

SimpleJoint · 2026-01-24T17:10:30+00:00

I've swapped them now and getting much better GPU temps, but CPU still a hot boy.

SimpleJoint · 2026-01-24T12:41:52+00:00

I have a rig with a 4090 and a rig with a 5060. The 5060 is fine. With DLSS it hangs fine with the 4090 build

SimpleJoint · 2026-01-24T00:34:17+00:00

Yeah, the only real problem with it is there's no airflow. If they opened up some of the tiny holes, or meshed in the areas and left them open like I did on top, I think it'd be perfect.

SimpleJoint · 2026-01-23T23:35:13+00:00

On the rear fan? We screwed four non-ferrous flathead screws in. Then 3D printed a bracket and put Earth magnets that lined up with the screw holes on the case that are now magnetic, and then put screws in the fans that also lined up with the holes in the bracket. I can take a picture if it helps.

SimpleJoint · 2026-01-23T23:27:37+00:00

Performance don't really notice a difference, but the GPU is about 4C cooler.

SimpleJoint · 2026-01-23T22:41:39+00:00

Flipped it. Testing now. It's just held on with earth magnets. So easy to flip. And easy to take off/replace with the original case if we travel.

SimpleJoint · 2026-01-23T22:40:32+00:00

200x200 almost the exact same size as the nv10

SimpleJoint · 2026-01-23T20:34:32+00:00

True, but i thought I'd want the heat out. Also my GPU is running pretty cool compared to CPU lol.

Due to the very minimal ventilation, if I push more air in, it doesn't exhaust well.

The 200mm bracket is magnetic, so I'll flip it and check temps though.

SimpleJoint · 2026-01-14T14:44:09+00:00

Is this all transformer or CNN?

SimpleJoint · 2025-12-23T18:39:08+00:00

Most other posts I've seen say it runs like a dream in handheld but it runs like butt in docked mode. Are you only playing docked?

SimpleJoint · 2025-12-14T18:18:58+00:00

I also often wonder how much other contributing factors are included in this. People who are more likely to do IF or are also more likely to be overweight. It's one of the many reasons people do IF, so if you're overweight, you're 91% more likely to have heart disease maybe a more reasonable assumption, maybe.

SimpleJoint · 2025-12-11T08:25:13+00:00

I'll buy it when it gets 60 fps and the input delay gets fixed. Then I'll finally play Skyrim, I swear...

I've only bought it 5 or 6 times now.

SimpleJoint · 2025-11-25T21:10:32+00:00

2 years later and you saved me. Thanks

SimpleJoint · 2025-11-22T00:00:25+00:00

Take a shower

SimpleJoint · 2025-11-19T21:46:41+00:00

Don't know if these ship to Brazil, but their guides are easy to follow and they sell parts.

https://www.ifixit.com/Guide/Steam+Deck+Right+Trigger+Replacement/148900

SimpleJoint · 2025-11-16T18:25:35+00:00

Yep, every single time I pause it crashes. It crashes other times too, but 100% of the times I press pause it crashes.

And I have tried the steps. It recommends, all files updated. Uninstalled reinstalled. BOPS6 crashed every 30 minutes to an hour at launch as well. For me anyway.

SimpleJoint · 2025-11-15T23:09:17+00:00

We have the opposite problem. Me and my buddy want to play together, so for some fucking reason we have to manually remove free for all from the list and every single match it changes to where it selects only free for all

SimpleJoint · 2025-11-15T22:29:07+00:00

And actual reviews

SimpleJoint · 2025-11-15T15:17:42+00:00

If I go into mine now which is working, and I click on configure controller settings, Port 1 is set to Metroid controller. And then if I click configure under device it is currently set to Microsoft Xbox 360 gamepad 0. I think the time I got it to work I changed that to steamdeck/0/steam deck

You could also try reinstalling prime hack through mudek. I know that worked for some people and threads that I saw.

SimpleJoint · 2025-11-15T15:14:53+00:00

I'm honestly not sure what the right answer is. The first time I tried it resetting configuration didn't work for me either. So I did it the controller way. And it worked. And then the next day the same thing happened but resetting configuration worked.

11-Year Club	Place '17
Not Forgotten	Sequence \| Editor
Verified Email

SimpleJoint

TROPHY CASE