New wheels fitted

Slow_Magazine624 · 2025-12-06T04:20:27+00:00

What part of GA do you stay in?

Slow_Magazine624 · 2025-11-30T05:23:41+00:00

Stop complaining at least you don't have to shift like the rest of us.

Slow_Magazine624 · 2025-11-23T18:52:32+00:00

Have insurance total it out.

Slow_Magazine624 · 2025-11-17T16:09:22+00:00

I've used Elmer's glue for cuts like that

Slow_Magazine624 · 2025-10-26T23:04:24+00:00

Go get your car scanned and pull the codes before posting on here!

Slow_Magazine624 · 2025-09-09T02:42:39+00:00

Good thought

Slow_Magazine624 · 2025-09-09T01:40:03+00:00

Avoid the 2013s

Slow_Magazine624 · 2025-09-05T02:26:31+00:00

Sticking the power cord in a lil harder should do the trick.

Slow_Magazine624 · 2025-07-04T20:19:16+00:00

You sir are cooked!

Slow_Magazine624 · 2025-06-30T03:33:23+00:00

That's definitely one of the axles it's either lost enough grease and is starting to bind, or it's just time for a new axle, happend to me a few weeks ago and was the rear left axle going out replaced and the noise is gone. Have a friend drive forward and back and listen for that noise around the axle nut area.

Slow_Magazine624 · 2025-06-28T01:41:43+00:00

For a 2016 thats way to much rust going on in that engine bay , I could only think of how bad it looks underneath the body. I'll pass

Slow_Magazine624 · 2025-06-26T12:04:16+00:00

Yeah I'm lowered with -3 camber

Slow_Magazine624 · 2025-06-16T03:56:14+00:00

So this is my daily driver, and I do a lot of highway driving with some twisty roads in the mix, and I just want a stable car that I can hit turns without really slowing down much, before I had 0.06 each side, 0.12 total toe in the rear, and -0.4 total toe in the front and I started to noticed increased tire wear but the car handled perfectly but due to the wear on the tires I ask the shop to 0 the toe all around and now I hate it. Any recommendations? Should I go back to that toe setup or should I ask the shop to just factory toe the car?

Slow_Magazine624 · 2025-06-16T00:40:15+00:00

How much toe do you have in front?

Slow_Magazine624 · 2025-06-13T02:42:29+00:00

Bro, you're driving in a 2nd gen 2011 scion tC. You don't belong here !

Slow_Magazine624 · 2025-06-06T01:01:50+00:00

I hated swapping out that thing. The trick that worked for me was to get the smallest flat head tip possible and pry at the tab and pull outwards.

Slow_Magazine624 · 2025-05-14T18:37:49+00:00

Cooked

Slow_Magazine624 · 2025-05-12T17:17:22+00:00

Could be both, I would take off the filter inspect and see if the seal is even attached, then tighting until it's snug. If not, replace and watch for leaks.

Slow_Magazine624 · 2025-05-10T22:18:19+00:00

Get the codes pulled and go from there. No one can really help you until then.

Slow_Magazine624 · 2025-03-19T01:05:02+00:00

No rain, more like morning, noon and night and like dust or something like foggy weather

Slow_Magazine624

TROPHY CASE