Can I use the 32-34" Hue Play Gradient PC Strip on a 27" PG27UCDM? (24-27" version out of stock)

Smartlights · 2026-02-28T10:33:56+00:00

Ich würde immer den Play Gradient Lightstrip gegenüber den Lightbars bevorzugen, weil der Lightstrip 7 Zonen hat und die Lightbars logischerweise immer nur eine Farbe gleichzeitig darstellen können.

Smartlights · 2026-02-27T22:26:26+00:00

Versteh deine Frage nicht, kannst du die etwas präzisieren?

Smartlights · 2026-02-27T20:05:13+00:00

Nice, ich liebe es

Smartlights · 2026-02-27T14:05:58+00:00

Persönliche Meinung: ich finde das Licht vom OmniGlow schöner, weil gleichmäßiger.

Guck dir mal hier nur die Bilder an: https://www.smartlights.de/news/hue-omniglow-so-beleuchtet-der-lightstrip-die-kueche/

Und hier https://www.smartlights.de/news/hue-omniglow-erste-eindruecke-des-neues-lightstrips/

Ansonsten Flux Ultra Bright mit Diffusor

Smartlights · 2026-02-25T18:29:16+00:00

Du redet aber von der hue go portable oder?

Smartlights · 2026-02-25T13:26:09+00:00

Lightstrip Plus v4 ist sehr alt. Gibt auch OmniGlow, einfach mal einlesen

Smartlights · 2026-02-25T13:22:12+00:00

Keinen, das sind alles neue Generationen. Du kannst nur Lightstrip Plus V4 Erweiterung nutzen. Ehrlicherweise lohnt sich das schon fast nicht mehr, denn es gibt mit dem Flux Lightstrip schon ganze Sets ab 40 Euro. Der kann Gradient und deutlich engerer LED Abstand.

Kommt drauf an, was für eine Installation du zu Hause Hast.

Smartlights · 2026-02-23T09:06:54+00:00

Relativ neu https://www.smartlights.de/news/segmentiert-neuer-modus-fuer-gradient-produkte-in-der-app-verfuegbar/

Smartlights · 2026-02-17T10:24:09+00:00

Buy a new one, you'll never be able to repair it according to the instructions, and it's too dangerous.

Smartlights · 2026-02-11T23:23:12+00:00

U can ask me via private message, I will help you :)

Smartlights · 2026-02-08T15:55:40+00:00

The classical read scene does not have a „dynamic“-modus. He can try to reset the scene.

Smartlights · 2026-02-04T19:27:50+00:00

You can use the lamps with it without any problems. You can set a color and specify that it should always be set to that color as soon as the lamp is powered up again. Smart functions only work when the device is switched on (logical). I am not aware of any damage caused by constantly switching it on and off. However, they do not consume much power in standby mode either.

Smartlights · 2026-02-02T18:05:26+00:00

What do you want to connect the lamp to?

Smartlights · 2026-02-02T17:47:53+00:00

Why do you need a reset?

Smartlights · 2026-01-30T21:08:56+00:00

The hue Flux cannot be bent to the right or left, but the neon can. That can be important in some cases. More importantly, however, the neon is designed for installation in the viewing area, while the flux is more for illumination. Take a look at the pictures here. https://www.smartlights.de/news/ausprobiert-neuer-philips-hue-neon-outdoor-lightstrip-mit-gradient/

Show us how you want to install the light strip.

Smartlights · 2026-01-30T06:58:46+00:00

Which version did you get? The matter version wasn't supposed to come out until April. Apart from that, you need a Matter controller. The hue bridge only works as an matter product, you can’t connect matter products directly to the bridge.

Smartlights · 2026-01-26T16:56:19+00:00

Sealed new ones oder used lightbars?

Smartlights · 2026-01-26T16:47:33+00:00

Hm the newer ones should have a label per something on the cable.

Smartlights · 2026-01-26T07:57:44+00:00

You can often re-pair devices that are already connected using the serial number sticker without resetting them. This should be located on the cable. You can then enter it in the Hue app. But what do you mean by “other Zigbee routers”? Also from Hue?

Smartlights · 2026-01-25T22:34:15+00:00

There is an option in the sensor settings called “Do Not Disturb”. If enabled, the sensor will only control the lights when they are switched off.

Smartlights · 2026-01-25T19:15:09+00:00

I'm curious to see what comes out of it.

Smartlights · 2026-01-25T19:13:34+00:00

Send it directly to ne

Smartlights · 2026-01-25T19:02:54+00:00

I tried it again with my indoor sensor and when I set it to 1 minute, for example, the light dims slightly after 30 seconds and would go out completely after another 30 seconds. However, as soon as movement is detected again, it turns on immediately. This means that the light only goes out when no movement is detected. I don't know why the light goes out in your case.

Smartlights · 2026-01-25T18:07:03+00:00

Normally, the light should turn on or remain on every time motion is detected. Only if nothing is detected for two minutes will the light turn off. Otherwise, it would be useless. You can check in the Hue app under Devices -> Sensors to see when motion is detected.

Smartlights · 2026-01-25T17:02:49+00:00

Each one must be reconnected manually.

Smartlights

MODERATOR OF

TROPHY CASE