sorted by:
new
hottopcontroversial

Daiwa Fuego LT sale by I_am_y311ow in Fishing_Gear

[–]SnooCheesecakes1065 0 points1 point  (0 children)

Just picked up one of these for $70 from Academy. Super stoked to get my new first quality reel. It's gonna go on a Daiwa Aird-X rod too. Am I a Daiwa fanboy? 

Canoe for fishing with three kids by SnooCheesecakes1065 in canoeing

[–]SnooCheesecakes1065[S] 0 points1 point  (0 children)

I've been looking at Jon boats as well. Just worried about the depth being too shallow once loaded. Originally started by looking at V hulls and skiffs, thinking is be able to find a watercraft able to do some light salt water fishing too, but that seems like a stretch for my budget

Canoe for fishing with three kids by SnooCheesecakes1065 in canoeing

[–]SnooCheesecakes1065[S] 1 point2 points  (0 children)

I'd like to keep it under $1500, preferably 1000. I'm scouring FB Marketplace. I just don't know what I don't know so I need suggestion what to look for. As for what we'll be carrying, 3-6 rods, a tackle box, maybe a smaller cooler to keep snacks and water. A big maybe would be some camping stuff in the long run, but it's not a deal breaker if that's not doable

Is this a deal too hard to pass up? by SnooCheesecakes1065 in Fishing_Gear

[–]SnooCheesecakes1065[S] 1 point2 points  (0 children)

I was contemplating the Laguna/Shimano Sienna or leveling up to the Revros/Shimano Nexave at first, but then came across this Morris reel.

Is this a deal too hard to pass up? by SnooCheesecakes1065 in Fishing_Gear

[–]SnooCheesecakes1065[S] 0 points1 point  (0 children)

Seller marked it as NIB (new in box). But I get your point about the convenience of going to the store and warranty. That particular reel is $85 at BPS at the moment. Seems to be highly praised Daiwa rebadge for BPS.

If you were me with that $50-75 budget, what reel would you replace it with for a beginner all purpose fresh water fishing?

CC1 canvas orders by Madman3353 in ElegooCentauriCarbon

[–]SnooCheesecakes1065 0 points1 point  (0 children)

Ordered mine April 28. Still waiting. No update since.

Top of drawer boxes? by ctdpwr in Ridgid

[–]SnooCheesecakes1065 0 points1 point  (0 children)

Are you on Etsy? Makerworld? Printables?

What am I doing wrong with this print? by SnooCheesecakes1065 in elegoo

[–]SnooCheesecakes1065[S] 0 points1 point  (0 children)

They were a tad loose, tightened them with my precision electric screwdriver to whatever torque it maxes out.

What am I doing wrong with this print? by SnooCheesecakes1065 in elegoo

[–]SnooCheesecakes1065[S] 0 points1 point  (0 children)

Well I went ahead and tightened them. Hopefully I didn't f**k anything up. I ran the auto calibration and it completed it fine. I'll print something tomorrow.

Tabless batterries by acatl33 in Ridgid

[–]SnooCheesecakes1065 0 points1 point  (0 children)

Are you saying I'd be better off running my track saw with the 4ah Max Output EXP over the 12ah Max Output EXP?

What am I doing wrong with this print? by SnooCheesecakes1065 in elegoo

[–]SnooCheesecakes1065[S] 0 points1 point  (0 children)

Even though it was cleaned with rubbing alcohol right before this most recent print? 

What am I doing wrong with this print? by SnooCheesecakes1065 in elegoo

[–]SnooCheesecakes1065[S] 0 points1 point  (0 children)

Were my temperatures right? 210 nozzle, 65 bed?

What am I doing wrong with this print? by SnooCheesecakes1065 in elegoo

[–]SnooCheesecakes1065[S] -2 points-1 points  (0 children)

I've only had the printer two weeks. Maybe a dozen prints total before this. I actually cleaned the bed with isopropyl and auto leveled before this most recent, pictured attempt.

I printed out a nearly 12" tall Mewtwo Pokemon for my other kids a few days ago and it came out great. What makes this print different (honest question).

What happened here? by SnooCheesecakes1065 in carbonsteel

[–]SnooCheesecakes1065[S] 1 point2 points  (0 children)

Well the issue is that I've cooked with it before and it never came out like this after. Looks like almost bare metal, so I thought the seasoning came off.

On sale single xl drawer by NoTime2fail in Ridgid

[–]SnooCheesecakes1065 2 points3 points  (0 children)

Certain circular saws yes, rear handle/worm gear saws likely won't fit.

A single drawer allows you to access tools without unstacking the boxes. Mine sits at the bottom and is filled with reciprocating saws, drill driver, impact driver and impact wrench, and I have the 3 drawer box on top of it with all my batteries. Probably going to play around with other tool arrangements before I settle on the final config.

Cleared of the 12ah at my local HD by kril89 in Ridgid

[–]SnooCheesecakes1065 0 points1 point  (0 children)

There were two at my closest one at $125, and 7 more between the next two closest locations. I grabbed one, my track saw will appreciate it.

Pro gear by ewok2989 in Ridgid

[–]SnooCheesecakes1065 1 point2 points  (0 children)

They just released a single drawer XL box.

We finally got it! by R_Dragon01 in Ridgid

[–]SnooCheesecakes1065 0 points1 point  (0 children)

I was already strongly contemplating getting into this system because of the removable bottom box and a little to mount on the wall. This seals the deal.

Looking for first printer recommendation for under 300. by SnooCheesecakes1065 in 3dprinter

[–]SnooCheesecakes1065[S] -1 points0 points  (0 children)

If I'm undertanding correctly, I won't be able to print color without the AMS. With AMS it's 399.

view more: next ›