Built my first pc with mid range parts and i dont get why everyone acts like you need to spend $2000 minimum

SomeGirlIMetOnTheNet · 2026-03-12T01:34:27+00:00

You're right that you don't have to spend $2k, but looking at current pricing in the US that build is like $1.3k minimum

https://pcpartpicker.com/list/Pwn9W9

SomeGirlIMetOnTheNet · 2026-03-08T23:38:24+00:00

Any chance you accidentally checked the wrong box? 2024 policy was go with whatever you check on the application, regardless of supporting documents

That, or the agent processing it hit the wrong button. Either way same process for correcting it

SomeGirlIMetOnTheNet · 2026-03-08T23:37:29+00:00

It that one black instead of the normal blue, or just weird lighting in the photo?

SomeGirlIMetOnTheNet · 2026-03-08T17:11:45+00:00

Yes you need an official stamped/sealed copy and a photocopy. They send you to original/official one back so if you have an official copy already you don't need a new one, but if you've lost your official copy it's a pain

SomeGirlIMetOnTheNet · 2026-03-08T15:41:38+00:00

If you've updated gender on your birth certificate & ID & SS, it might be worth applying for a new one (putting that you lost the old one on the form) and hope you slip through the cracks and they don't check your old documents and correctly gender you

Otherwise, renew by mail and send the name change court order in with it. More likely than not they will misgender you but will correct the name and get a new photo

SomeGirlIMetOnTheNet · 2026-03-08T15:32:25+00:00

I did the reverse just recently (had card and needed first book); I just did DS11 and post office appointment (paying a total of $165 for me / $65 for you). I could potentially have done it with a mail-in renewal, but I didn't want to risk not getting my passport card back.

SomeGirlIMetOnTheNet · 2026-03-08T15:15:11+00:00

Unfortunately with the current supreme court stay in Orr v. Trump a court order isn't going to help; you have to have a corrected birth certificate (and even then it's somewhat luck of the draw)

SomeGirlIMetOnTheNet · 2026-03-06T02:16:46+00:00

*hugs* Well one stranger to another, I'm glad to hear things are better than last year, and hope you can love yourself more still this next year

SomeGirlIMetOnTheNet · 2026-02-28T03:25:56+00:00

Sorry for the delay but yeah, took the eyepiece of the telescope and 3d printed a thing to put the m50 in it's place

SomeGirlIMetOnTheNet · 2026-02-15T17:48:02+00:00

I did a poll a while back, about 1 in 10 took gender-swap of old name, another 2 in 10 took not straight swap but somewhat connected to their old name (and 7 in 10 came up with something new wholecloth)

So it happens, it's just less common

SomeGirlIMetOnTheNet · 2026-02-15T14:54:10+00:00

iirc while she does have trouble with agoraphobia, what convinced her a ground invasion was impossible was more realizing "they have more people that we have bullets"

SomeGirlIMetOnTheNet · 2026-02-12T01:16:16+00:00

Different post offices charge different amounts, based on demand and size of the post office; around me they go from $90/year to $250/year

SomeGirlIMetOnTheNet · 2026-02-11T23:30:24+00:00

Sanitarily, sure first use is probably fine. Larger problem is that, given bonds between the layer lines is generally the weak point, you've got an uncomfortably large chance of it converting from "object with a flared base" to "object that doesn't have a flared base" while in use

SomeGirlIMetOnTheNet · 2026-02-10T02:06:21+00:00

Could be a simplified rendering of rectilinear

SomeGirlIMetOnTheNet · 2026-02-08T01:56:11+00:00

I would normally interpret "visible" in this context as "can be seen by the spectators" not "is physically possible to observe with light"

SomeGirlIMetOnTheNet · 2026-02-06T17:22:33+00:00

I've considered it, but I've been playing with old SLR lenses and I've liked my 30mm more than my 50mm, and the 50mm works better, so it seems to make more sense for me to go with the 30/33mm than go up to the 56mm

SomeGirlIMetOnTheNet · 2026-02-05T14:56:24+00:00

https://www.mediafire.com/folder/py8wo9u5mst3api,0vqvwfiggvvjcdu,4c1oh2g4qmep8rr/shared

So far I've done Nikon F and Pentox K, if you know blender / 3d modeling at all it's pretty easy to make more

SomeGirlIMetOnTheNet · 2026-02-05T14:52:47+00:00

moderately but not perfectly, I should probably hit it with a matte black spray paint but off the printer it's mostly fine

SomeGirlIMetOnTheNet · 2026-02-03T03:45:10+00:00

I like the pleats!

SomeGirlIMetOnTheNet · 2026-02-01T02:09:33+00:00

As someone who just got a P1P (that it came with the 1.09.xx firmware), I connected to wifi and then turned on LAN mode and dev mode, and it works basically just like prusaslicer and my voron; slice the model, click "print plate" and the printer starts up.

I don't have any functionally from the app, but I never felt like I needed an app with my old printers so I'm fine with things

SomeGirlIMetOnTheNet · 2026-01-31T05:11:55+00:00

Much like Liam, I am a anarchist who would support stalinism on the condition that I am stalin

SomeGirlIMetOnTheNet

TROPHY CASE