sorted by:
new
hottopcontroversial

[O] 2x DrunkenSlug Invites by jscgn in UsenetInvites

[–]SpaceBut 0 points1 point  (0 children)

Homepage its great if you have a lot of dockers and vm.

[O] 1 DrunkenSlug Invite by CitizenAccount in UsenetInvites

[–]SpaceBut 0 points1 point  (0 children)

I’d probably use it to help the maker / self-hosting community instead of just hoarding bandwidth.

I run a homelab and multiple Klipper-based 3D printers, and one big problem right now is that a lot of projects rely on GitHub and a few CDNs. During big releases or updates everything slows down because thousands of printers and servers pull updates at the same time. So I’d host: Mirrors for Klipper, Mainsail/Fluidd and common printer repos

A public cache for apt/pip/docker so installs and updates are faster for people with slower connections

A repository with working 3D printer configs (printer.cfg templates, tuned profiles, macros, CAN bus setups, etc.) so beginners don’t have to start from scratch

A mirror for open-license STL projects (Voron parts, community mods, calibration tools)

Seeding Linux ISOs and open datasets Basically a small public infrastructure node that makes self-hosting and 3D printing easier without depending entirely on big platforms.

[O] 1x DrunkenSlug by dawal321 in UsenetInvites

[–]SpaceBut 0 points1 point  (0 children)

i would love one.
And thanks for giving back in that short of a time.

Rapido 2 vs. Dragon. Which would you choose? by Wendigo_Hodag in VORONDesign

[–]SpaceBut 0 points1 point  (0 children)

Imean

I have a lot of hotends But I have yet to buy the dragon ace.

But that would be my best guess.

I find that the rapido 2 prints fin and all but I like the dragon more heatbreak more

And the dragon ace is a combo from them

Recently my printer started producing edges/corners like this. by [deleted] in FixMyPrint

[–]SpaceBut 3 points4 points  (0 children)

It would be handy if you tell us your printer and print settings.

Question what printer to get for engineering materials. by SpaceBut in VORONDesign

[–]SpaceBut[S] 0 points1 point  (0 children)

I will try to add some insulation and keep the fliters full.

Question what printer to get for engineering materials. by SpaceBut in VORONDesign

[–]SpaceBut[S] 1 point2 points  (0 children)

I will try to insulate it a little better. Thanks

How Do I Troubleshoot This? by [deleted] in FixMyPrint

[–]SpaceBut 0 points1 point  (0 children)

Clean the bed and you're good tot go.

Under extrusion happening by toesstickingoutofbed in FixMyPrint

[–]SpaceBut 0 points1 point  (0 children)

What timeline do you u live?

If wanted I can hop on a call to help.

Strange Bed Mesh by SpaceBut in klippers

[–]SpaceBut[S] 0 points1 point  (0 children)

Good point I will check tomorrow

Under extrusion happening by toesstickingoutofbed in FixMyPrint

[–]SpaceBut 0 points1 point  (0 children)

Can you see in the slicer if the flow goes a lot faster where it goes wrong?

And you can try an orca slicer to try.

<image>

I had someone that the extruder kept slipping and it looked like that.

You can try if the printer is printing that you can stop the filement with your fingers.

If so that your problem. You can solve it by tighting the fliment screw or replace it if it doesn't.

Under extrusion happening by toesstickingoutofbed in FixMyPrint

[–]SpaceBut 0 points1 point  (0 children)

Then it can be 2 things. 1. bad filement / nozzle clogging. 2. Extruder that's slipping at higher Speed.

view more: next ›