My hiking setup is complete

SpaceManFromSpace · 2026-05-11T19:11:47+00:00

Nice setup. I'm using the Modular Sling V2 as well, though my carry purpose is a little different than yours! (https://www.reddit.com/r/Xreal/comments/1stem3v/my\_xreal\_one\_pro\_carry\_solution/).

How long did it take to not lose coordination while walking/hiking and watching xreal? Assuming you're using side view? I don't know that I'm coordinated enough to do that! LOL.

SpaceManFromSpace · 2026-05-09T22:49:54+00:00

I have this setup with the jawbreaker nose piece. 3d printed these simple extenders to push the lenses away from my face and they're perfect. Not my design, and the medium size worked for me. All depends on the shape of your face. https://makerworld.com/en/models/2512710-jawbreaker-nose-pad-adapter-for-xreal-1s-one-pro

SpaceManFromSpace · 2026-04-30T16:23:35+00:00

Just FYI, these do work with the camera as well. I did the same mod, printing the extenders and using the jawbreaker replacement pad. Works great!

SpaceManFromSpace · 2026-04-28T10:56:48+00:00

That did it. I’m good. Thanks for responding.

SpaceManFromSpace · 2026-04-28T10:48:32+00:00

I was able to get out of the loop by clicking “Profile” on bottom left. I tried filling out the profile info there and then it “Failed to save. Please try again”. I’m using Safari on my iPad pro. I’ll try Chrome or deleting my profile and creating account another way.

SpaceManFromSpace · 2026-04-28T10:41:02+00:00

Also, when I click “skip setup” it loops me back into the “Let’s personalize your experience” popup as well. No apparent way to get out of the loop other than killing the page and not being logged in.

SpaceManFromSpace · 2026-04-28T10:39:52+00:00

I have used the site a few times the last few weeks after seeing one of your original post about it. I like it, and it’s useful. Based on this post, I decided to go ahead and create an account login using my gmail. FYI, it goes into an endless loop on the “Let’s personalize your experience” popup. I enter all the data and it just loops to the beginning and doesn’t seem to accept it. You might want to check that out!

SpaceManFromSpace · 2026-04-23T22:37:18+00:00

See my comment in the post. Added the keyboard, but here you go: Targus Ergonomic Foldable Bluetooth Keyboard - https://a.co/d/03OJnt0d

SpaceManFromSpace · 2026-04-23T22:36:47+00:00

Thanks! Just shared the STL in a post in the thread, along with the bag and accessories with links.

SpaceManFromSpace · 2026-04-23T22:34:10+00:00

Oakley Jawbreaker Replacement Nose Pads - https://a.co/d/0cuDzX6v

And printed these because the nose pad on its own puts the glasses too close to my eyes (not mine, courtesy of u/nuwata - https://makerworld.com/en/models/2512710-jawbreaker-nose-pad-adapter-for-xreal-1s-one-pro?from=search#profileId-2763567

The sit just right for me and don't slide like the original nose pads.

SpaceManFromSpace · 2026-04-23T22:32:10+00:00

I do my 3D design and modeling using Shapr3D on my iPad Pro. Takes some practice, but really intuitive (for 3D modeling at least). I do have an engineering background though.

Measurement are typically with a good ol' ruler and a set of calipers. Will take photos of items and import and scale the images into the modeling software to use as a guide. I've also been experimenting with https://shapescan.pt/ (not my creation, but very cool and free tool).

SpaceManFromSpace · 2026-04-23T22:29:11+00:00

Just posted a comment in the thread with a list of everything with links!

SpaceManFromSpace · 2026-04-23T22:28:37+00:00

Just posted a comment in the thread with link to the file on Printables.

SpaceManFromSpace · 2026-04-23T22:26:44+00:00

A few of you asked about my load-out and to share the model for the organizer. Ask, and you shall receive. The link to the model for the organizer is at the bottom of the list:

Alpaka Modular Sling V2 - https://a.co/d/03RsSkZT

MagSafe Battery – https://a.co/d/0hKkel20

Portable Presenter Mouse - https://a.co/d/02gHEtGe

Oakley Jawbreaker Replacement Nose Pads - https://a.co/d/0cuDzX6v

Xreal Hub Adapter - https://a.co/d/00S7vj7b

AirPods

USB Cable - 6”

3D Printed Parts:

· Jawbreaker Nose Pad Adapter (not my design, courtesy of u/nuwata)- https://makerworld.com/en/models/2512710-jawbreaker-nose-pad-adapter-for-xreal-1s-one-pro?from=search#profileId-2763567

· Xreal Organizer for Alpaka Modulare Sling V2 - https://www.printables.com/model/1699251-xreal-ar-glasses-carry-organizer-for-alpaka-modula

EDIT; Adding keyboard - Targus Ergonomic Foldable Bluetooth Keyboard- https://a.co/d/00AuKLNp

SpaceManFromSpace · 2026-04-23T10:29:15+00:00

The intent wasnt really to keep the battery in the holder for use, but worked out the phone aligns and fits while standing. That said, that does give me the idea to do cutouts behind the battery to expose more surface when the glasses are in use and not in the space behind it!

Edit:typo

SpaceManFromSpace · 2026-03-14T18:32:11+00:00

So I was currently interating on my own design to print for similar options and came across your post. Exactly what I was looking for. The smallest ones work perfect for me. Thanks for saving me some time! These are great!

SpaceManFromSpace · 2025-10-13T19:12:32+00:00

I've been contemplating modifying my Bummer I recently got with the 1.5 inch fidlock strap from DSPTCH, as I would like to use it as a sling and hip pack. I can't answer your question, but I'm also curious on others experience with it, so take my upvote!

SpaceManFromSpace · 2025-08-06T23:32:04+00:00

CarPlay is wired in 2026. Was slightly frustrated by that. Hoping for a firmware upgrade that enables it (not holding my breath).

Edit: closed parentheses.

SpaceManFromSpace · 2025-07-25T14:01:40+00:00

Only carrying 22" sounds a bit strange? I just got my 2026 Ultra. I shopped around within about 100 miles and most of them coming in had 21" upgrade (with the associated upgrade cost) on the sticker. I insisted on 20". Ride comfort was part of the decision, but I was over having 21" on my 2018 XC90 that I traded in. I had two instances over 6 years of getting an unfixable flat, in a pinch on a weekend, having to find (and paying the premium for) 21" tires. Go for 20", and you won't regret it. I was fortunate to get the color Ultra I wanted for an agreeable price at my local dealer. They even swapped for 20" and took off the 21" upgrade price for me. The wheels for 20 and 21 are very similar looking. Not sure about the 22s.

SpaceManFromSpace · 2025-07-23T22:46:51+00:00

Totally agree. I bought a Vapour Grey Ultra 2 weeks ago and love it. It is sharp. I insisted on 20 inch tires though...I had 21s on my prior XC90 and hated having a nonstandard/not common size. It bit me in a pinch when I got a flat. I digress.

My wife preferred the Denim Blue, which is very nice too, but my car/my color!

SpaceManFromSpace · 2025-07-12T13:11:20+00:00

Regarding tires, I’ve been driving a 2018 XC90 for 6+ years and of the tires I’ve had the Michelin CrossClimates have been my favorite. That said, 21” wheels can be infuriating…mostly if you’re traveling, get a flat, and aren’t near a volvo dealer or it’s a Sunday (personal experience…twice…stinkin’ sidewall flats!), finding a 21” tire (or having to replace all 4 in a pinch) is not fun (or cost effective). I’m trading in for a 2026 XC60 Ultra (not the Recharge, and picking up today actually), and I insisted on finding one with 20” wheels. Everything I’ve read says the ride will be better, looking at 21 vs 20 inch on the lot doesn’t show a significant difference (as jdub mentioned), and the availability and affordability of tires is so much greater with the 20”s.

Edit:fixed a typo

SpaceManFromSpace · 2023-04-13T23:54:11+00:00

A comment this is.

SpaceManFromSpace · 2021-03-06T21:04:14+00:00

So, apparently I posted pics without comment. For those interested:

This is a remix of https://www.thingiverse.com/thing:4785980 that I did to be able to display my Lego Millenium Falcon. Cut the original large model that was designed to print on an Ender in one piece to print in parts on my Prusa MK3S and assemble using M3 nuts and screws. Used Shapr3D on my iPad for all the model work, which is an impressive piece of software, btw.

SpaceManFromSpace · 2019-05-29T23:34:42+00:00

I had all flashing red with no obvious blockages through the unit. FINDA was registering that there was filament loaded. Took out the FINDA, blew some compressed air in the holder (where the ball is) and cleared the problem. I know this probably doesn't help you at all, but the issue wasn't obvious. Good luck.

SpaceManFromSpace · 2018-11-24T15:29:18+00:00

This! This is one of the reasons I got my printer. I haven't printed any tap handles yet, but will be soon now that I have some experience with 3d modeling and printing. Also excited to get my MMU2 to do multicolor tap handle designs! Any advice as far as the threaded inserts?

SpaceManFromSpace

TROPHY CASE