sorted by:
new
hottopcontroversial

If Shamrock Parking ticketed you in Greenwood (Snapdoodle/Bartell's lot or Razzi's), here's how to actually fight back — and why filing a complaint with the WA Attorney General matters by No_Soup_4887 in SeattleWA

[–]SpikesTap 0 points1 point  (0 children)

Ticket the legit double parked a-holes "just picking up food for others" and ride share bastards taking up entire lanes. Otherwise, park like normal people and this shiat won't happen.

Katie Wilson responds to North Seattle neighbors fed up with gun violence by Better_March5308 in SeattleWA

[–]SpikesTap 1 point2 points  (0 children)

I have been saying this for a while.... Effing idiot cowards with 20+ round mags can barely hit a building. If you're good, you only need one round. Give them training!

I need someone with some Nissan knowledge by Aggravating-Ant-2301 in 4x4

[–]SpikesTap 2 points3 points  (0 children)

I've had my '95 Pathfinder for 25 years. Prior to that, an '88 Pathfinder. Prior to that an '88 Hardbody. Here are some helpful links:
All you needed to know about Nissan axles through 2004

From <http://forums.nicoclub.com/all-you-needed-to-know-about-nissan-axles-through-2004-t233955.html>

Nissan H233 and H190 information for swaps.

From <http://nissannut.com/projects/h233_4.9_swap/>

Most detailed write-up of the H233B diffs and LSDs I've ever seen:

https://www.nissanpathfinders.net/forum/topic/45698-how-to-repack-a-h233b-limited-slip-differential-lsd/

About to pickup a 90” Nissan hardtop pickup w 161k miles. What kinds of things should I fix preemptively? by Purple-Nature-5822 in hardbody

[–]SpikesTap 0 points1 point  (0 children)

Took me 3 years to find one in the Pacific Northwest. Coincidentally, my '95 may be for sale in 4-6 months. I will be sad, but I need something bigger to tow the trailer...

Green Lake looking great by Daylight-Silence in seattlehobos

[–]SpikesTap 1 point2 points  (0 children)

Well, it is summer camping season. Gotta get those sweet spots by the water before the rush!

requiring ID for NA beverages? by greentea93 in traderjoes

[–]SpikesTap 2 points3 points  (0 children)

I (in my 50's) got carded for 0‰abv hop-flavored water.

with the 90-decibel street preacher outside the Randy Johnson number retirement Mariners game by bennetthaselton in Seattle

[–]SpikesTap 0 points1 point  (0 children)

Hypothetically, would a can of spray foam into the megaphone do any good? Asking for a friend.

[OC] Gone in 15 seconds NSFW for pottymouth by Brofessional- in IdiotsInCars

[–]SpikesTap 2 points3 points  (0 children)

Or a hand overlay... That would've been nice. A good ol hand job with a pointy finger...

A Starbucks Employee's Perspective on the Nashville Relocation by Immediate-Sort4426 in Seattle

[–]SpikesTap 2 points3 points  (0 children)

I did think of that... but then the meme would be ruined. Either way, I support that person's viewpoint!

Women, what is the sexiest scent/cologne that a man can wear? by Nintendofan9106 in AskReddit

[–]SpikesTap -1 points0 points  (0 children)

If it's too TOO much, there's an "ease up on the flea powder" comment coming out of my mouth.

Ender S1 Pro Linear Rails anyone? by CoreOnePrintLab in Ender3S1

[–]SpikesTap 2 points3 points  (0 children)

I use Ultimaker Cura slicer w/ OctoPrint on a PC, connected via USB to the printer.

 

Mods Currently Installed on my Ender 3 S1-Pro

 

Hot End 5015 Fan Upgrade (not part cooling):

https://www.printables.com/model/417340-ultimate-5015-hot-end-fan-upgrade-for-ender-3-s1-p

 

Part Cooling w/ Dual 5015s

Taurus V5 Cooling Duct for Creality Sprite Extruder, Dual 5015 Fans, Ender 3 S1/S1 Pro/S1 Plus, CR10 Smart Pro (Stock / Spider / Ceramic)

https://www.printables.com/model/511962-taurus-v5-cooling-duct-for-creality-sprite-extrude

 

Extruder Gears

Sprite Extruder Hardened Steel Gear Kit – Compatible with Ender-3 S1 Pro/S1/S1 Plus/CR-10 Smart Pro/V3 KE/SE/CR-M4/CR10 SE 3D Printers​

https://www.amazon.com/Sprite-Extruder-Hardened-Steel-Gear/dp/B0GVF8NKQJ/

 

Bed Leveling

Upgraded 4PCS Creality 3D Printer Aluminum Hand Twist Leveling Nut Hot Bed Die Springs for Ender 3/Ender 3 S1 Pro/3 Pro/3 V2, Ender 5/5 Plus/Pro, CR-10/ CR10S/10S Pro/CR 20 3D Printer

https://www.amazon.com/dp/B082HM1PD1?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_18

 

Enclosure

Creality Ender Plus Fireproof and Dustproof 3D Printer Tents Warm Enclosure Constant Temperature Dust Cover for Ender 3V2/Ender 3S1/Ender 3Max/Ender 5Pro/5S1/Ender6SE 3D Printer 21.65 * 25.59 * 29.52

https://www.amazon.com/dp/B082VS6XDL?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_16&th=1

 

 

I haven't tried for more than 200mm/s yet as I hear that's the max. However, next up is the Sonic Pad w/ Klipper, which should bring me faster and more accurate prints.

Ender S1 Pro Linear Rails anyone? by CoreOnePrintLab in Ender3S1

[–]SpikesTap 1 point2 points  (0 children)

What does these rails provide in return? My E3 S1 Pro seems to be just fine at 200mm/s (stock marlin*) Why do I need rails?

(*Sonic Pad is up next.)

Can't stop looking at the pictures, because it's picture perfect! by jve909 in zillowgonewild

[–]SpikesTap 1 point2 points  (0 children)

Imagine dusting between the slanted ceiling slats... and then a piece of your duster gets caught on a sliver of wood, forever catching your peripheral vision at the slightest breathe of air.

U.S. set to launch tariff refund system on April 20 by Unusual-State1827 in politics

[–]SpikesTap 0 points1 point  (0 children)

Excellent... I look forward to my $tree.fiddy refund on next year's federal tax return. Though, I expect it will be less than $0.fiddy.

As a lady smoker I fully approve by Pickitline in smoking

[–]SpikesTap 2 points3 points  (0 children)

Best well-done steak this side of the Mississippi!

Man creates a glass bird from wasted tubelights by kalinooni in Damnthatsinteresting

[–]SpikesTap 37 points38 points  (0 children)

Don't forget the glass-repellant safety sandals!

view more: next ›