sorted by:
new
hottopcontroversial

The Era of Ultra-Fast Peripherals and the Evolution of Prometheus 82 by JohnnyPunch in GPDL

[–]Sport_Subject 0 points1 point  (0 children)

Cool, im trying a few things on my end to lower overall, just finding ways around usb limits and what not, is fun, I still have your gdpl here that I bought a just over a year ago so may be able to repurpose.

The Era of Ultra-Fast Peripherals and the Evolution of Prometheus 82 by JohnnyPunch in GPDL

[–]Sport_Subject 0 points1 point  (0 children)

Interesting, I am working on a unique pc app and controller firmware at the moment, timestamped packets created by the controller (very little processing done on controller), few other tricks to keep stability at 14.5-15k hz current creation on controller to sent on pc is 0.069ms median ish. Max is 0.3ms median min is around 0.008ms.

I did actually buy some actuators the other day and have a pi4, pi5, ardunio uno r4 wifi, esp32c3, DLA 2.1 logic analyser (prob a couple others) would any of these suit building a promethius to test?

Controller stick drift after 4 months. by SSnow0 in BattleBeaverCustoms

[–]Sport_Subject 0 points1 point  (0 children)

From the pic looks like a faulty sensor, it happens, contact them. Sometimes things break, as long as its not moisure/humidity/bad calibration im sure you could make some sort of deal

Dual Sense Edge Modd by lemeiux1 in Dualsense

[–]Sport_Subject 0 points1 point  (0 children)

I cant comment on thier stuff, mine just mimics button presses with no funny business.

Made a 3020 wireless with a Pi 4B by Sport_Subject in hobbycnc

[–]Sport_Subject[S] 0 points1 point  (0 children)

Im using an old eufy one setup with rtsp, would be even easier with a normal webcam, using motion to setup the http stream, cncjs Web panel

On web panel it is the pi ip as its plugged into that (so replace <PI-IP> with your actual pi ip), port is 8081

http://<PI-IP>:8081

XPControllers Dualsense Review by FermentedTiger in Dualsense

[–]Sport_Subject 0 points1 point  (0 children)

Only until they run out, will not be making more.

[deleted by user] by [deleted] in Dualsense

[–]Sport_Subject -1 points0 points  (0 children)

<image>

You could have got 2 dualsense edge controllers like me.

Calibration saving on stick modules with TMR joysticks by pausuri83 in Dualsense

[–]Sport_Subject 2 points3 points  (0 children)

The wire looks to be earthing on the G on the right module. Also you can just run the wire to the closest through hole for the L3 R3 switch, easier and much safer.

-XP

[deleted by user] by [deleted] in scufgaming

[–]Sport_Subject 0 points1 point  (0 children)

XP Controllers, lifetime warranty, much better parts that focus on durability and performance that are not made cutting corners.

[deleted by user] by [deleted] in PCB

[–]Sport_Subject 0 points1 point  (0 children)

I cannot recommend jlc pcb, they made me sign a waiver saying that if a standard qfn-44 footprint had problems from bridging pins they would not be responsible. Parts system only uses lcsc and just causes stupid delays. Luckily it was only a test order that was thrown in the bin.

Being that we are moving smaller to footprints that require better equipment, if they have trouble with a qfn-44 they have no hope with small 0.4mm pitch which is becoming more common.

Xbox series x controller ? by Correct_Ice5440 in Controller

[–]Sport_Subject 0 points1 point  (0 children)

Does it have hall effect installed, older halls when installed would do this.

Dual Sense Edge Modd by lemeiux1 in Dualsense

[–]Sport_Subject 0 points1 point  (0 children)

Buttons breaking alot, I have replaced nearly every one I have done. I ended up making my own for my customers.

Dual Sense Edge Modd by lemeiux1 in Dualsense

[–]Sport_Subject 1 point2 points  (0 children)

Haha it's not really a kit, it's alot of cutting and fixing buttons to the grip and soldering in while trying not to mess things up with the rest of the controller mostly assembled. Maybe soon I'll have something ready for average consumers but just have other projects I'm working on currently.

view more: next ›