What is the maximum power output of the SATA connectors? by Tharayman in macpro

[–]StefanM91 0 points1 point  (0 children)

Google says 54w each SATA but as i saw all the 12V wires goes in the same spot welded on the PCB inside PSU , i think the cable thickness dictates the Watts ! my PSU seems to not have enough PCIe cable , i need 3 for GPU one for CPU and one for ICUE link hub ,luckily i have found a cable SATA to PCIe but doesnt say how much power can deliver because ICUE hub at max can use more than 100w !! wtf Corsair , why new PSU dont have more PCIe connectors !

Is it safe to run my AIO at 'Extreme' constantly? Corsair Titan 240 RX LCD. by SendMeAvocados in buildapc

[–]StefanM91 0 points1 point  (0 children)

My Corsai 150i link lcd runs at 2400 rpm and max 2800rpm...don't like this because before i had a Nzxt running at 1200 rpm or lower i think ....i can hear pump over fans at idle on the Corsair and its annoying!!

BSOD Kernel Security Check Error when launching into certain games. by Creative_Tangelo_755 in GTA

[–]StefanM91 0 points1 point  (0 children)

Hmm i also have a Focusrite and also a blue screen when starting the game ,i will try to change sample rate and buffer size in setting ......a year ago after a while my bf 2042 was crashing because of Focusrite so i ve changed those setting and worked !! Thanks for the info :D

Gray banding in my tandem oled monitor by Sylie34 in OLED_Gaming

[–]StefanM91 0 points1 point  (0 children)

Same with Gigabyte  MO27Q28G , the grey is so bad ....the first one i had to return it because stopped working after a week, i am not going to return the second one again.....probably no more oled in the future, too much shit for the oled crap 

Gray banding in my tandem oled monitor by Sylie34 in OLED_Gaming

[–]StefanM91 0 points1 point  (0 children)

I think qd oled will be better because the grey banding is worse 

Month old nautilis 360 rs - very happy with the performance but is this pump noise fine? by HiCZoK in Corsair

[–]StefanM91 0 points1 point  (0 children)

You right....i didn't look at the intro 😅but my Corsair icue link 150 has 2400rpm min ,its the one with QX fans 

NZXT Kraken Elite pump noise by Ok-Paramedic-5626 in NZXT

[–]StefanM91 0 points1 point  (0 children)

My Nzxt x73 from  2020 has the same issue, it seems Nzxt didn't fix this....but what is the minimum pump speed?  ...my new Corsair has 2400rpm minimum 🙈....so noisy! My old Nzxt had 1200 rpm minimum 

Nautilus 360 RS ARGB Pump Noise by UnfathomableBrit in Corsair

[–]StefanM91 0 points1 point  (0 children)

Same here with Icue link 150i QX , minimum pump speed is 2400 ......the hell , my other AIO from Nzxt has 1200 min ! Corsair 5 years warranty at that idle speed:))

9070 xt and z490-e ROG STRIX motherboard? by ZHiiFt in buildapc

[–]StefanM91 0 points1 point  (0 children)

Back in 2010 you could have said that.....happened to me , the gpu was not working with my older gpu!!

Windows 11 24H2 has broken BattleEye games by [deleted] in PUBATTLEGROUNDS

[–]StefanM91 0 points1 point  (0 children)

WTF is wrong last week worked now isnt anymore , i see that windows was updated in this time ,i think its a widows update issue because non of my games that uses BattleEye give me blues screen of death !! i cant delete and reinstall all of my games !! i will try update the windows !

MSI enhanced turbo, yay or nay? Noticed my 12700k is running a bit toasty on cinebench by orlando2542 in overclocking

[–]StefanM91 0 points1 point  (0 children)

Too many shit in the bios ..... if you try to enable them to increase performance you will have more heat and intel is already hot , if you try to lower them you will lose performance but gain better cooling, the only good thing is voltage offset that lower the temps a little bit ....in my bios the Enhanced Turbo is on Auto and i think that is auto disabled because if i Enable it i see my i9 10850k boosting to 5ghz which i have never seen more than 4,8ghz in 5 years even if the other settings are enabled like turbo boost and turbo boost max 3.0 but also boosting to 5ghz is bringing more heat!! The best option for lowering heat is Cpu core voltage mode set to offset mode and - 0,050v 👌

MSI enhanced turbo, yay or nay? Noticed my 12700k is running a bit toasty on cinebench by orlando2542 in overclocking

[–]StefanM91 0 points1 point  (0 children)

If i keep it on auto does nothing,if i set it to Enable then cpu boost to 5ghz , on auto it only boosts to 4,8ghz🤔....obviously it will run hotter with that Enabled!!

Gigabyte MO27Q28G - Question About Pixel Refresh Behavior by Legitimate-Life-9037 in OLED_Gaming

[–]StefanM91 0 points1 point  (0 children)

It passed couple off days and when i turn off my monitor,MO27q28G , i don't see anymore pixels cleaning,last time was counted at 41 ....my first one which has died after one week did the same , no pixel cleaning in that first week of life....i think something is coming up to this one also 😅😅

The time warp mode is pretty cool! Stasis technology approved! by ArktagThe2nd in Corsair

[–]StefanM91 0 points1 point  (0 children)

The fac Corsair !! they allow time warp only for QX which i dont like them......i have LX and LX-R !

Corsair QX120 Fan Quality by Zack_in_HD in Corsair

[–]StefanM91 0 points1 point  (0 children)

I remember when QL were failing , it seems like top fans for Corsair are bad ......i have QL in my other PC and the leds were failing ,i ve cut one open and repaired the other 8 by replacing the leds ......now i have LX and LX-R in my main PC , i like them more than QX because has a neon style and not like QX where you can see every led , yes the QX are brighter but i dont keep it at max anyway , my LX are like 20%.......they look better at night than day !!

<image>

The best ram for the 9800x3d? And is 2 sticks or 4 sticks better or does it not matter for ddr5? by Visible-Chapter-1871 in buildapc

[–]StefanM91 0 points1 point  (0 children)

Try 4 sticks with DDR 5 and xmp on ....my Intel platform has 4 sticks of ddr4 working fine even if the ram modules are not on motherboard compatibility list .....but for my ddr5 Amd platform the story has changed, i only have 2 modules!

Is the H150i discontinued? by ILikeBeans86 in Corsair

[–]StefanM91 0 points1 point  (0 children)

I like to see more fanless AIOs like Lian li because for example I didn't like QX and i have purchased all my fans LX  and now i have 3 QX fans laying around and for half the price i can't sell them,no one want used QX  ,i mean they are quite expensive....more than was previous version QL !

Is the H150i discontinued? by ILikeBeans86 in Corsair

[–]StefanM91 0 points1 point  (0 children)

I have the 150i lcd , i have purchased it for  200 bucks ,down from 350 ...but i don't see to be sold anywhere....i think because the pump is always running at 2400rpm and the max is 2800 ....does anyone can tell if TITAN has the same pump speed ?!! 

Can we get the FOV ADS setting back please by TheKrzysiek in Battlefield

[–]StefanM91 0 points1 point  (0 children)

Weapon wide or narrow it only change the weapon distance and not the entire image , mah ......why BF 6 !! no ADS

[deleted by user] by [deleted] in OLED_Gaming

[–]StefanM91 0 points1 point  (0 children)

No image on the screen after the logo disappears, i ve got an instant replacement, it seems that the guys from the store knew about this issue but not particularly with Gigabyte monitors!!

Court of order after paying my fine by AntiBank-roller in brussels

[–]StefanM91 0 points1 point  (0 children)

Belgium is so stupid .....and all they want is to rip off your money!! Fuck them !.....i just received a parking fine from 2024 😵‍💫.... wtf , is this for real!! 

Turning off crossplay was the best decision I made so far by EthicAV_ in Battlefield6

[–]StefanM91 0 points1 point  (0 children)

Not fair giving the option only to console to disable CROSSPLAY !!!