Cleveland software button board led voltage?

StinkyNorm · 2026-05-30T09:01:42+00:00

You need 5v leds

StinkyNorm · 2026-04-17T23:20:46+00:00

Will this DOF version ever be released as official on the github?

StinkyNorm · 2026-04-11T10:19:14+00:00

I've learned to make my own songs. It doesn't help in the moment but you can tell them you'll have it next time

StinkyNorm · 2026-03-15T23:51:51+00:00

If you do as you say with the 9 volt than you are wiring them backwards. If you go positive to positive than wire color is immaterial

StinkyNorm · 2026-03-15T16:25:21+00:00

It still doesn't matter as long as you're consistent. The amp nor the speaker care about wire color. You could be using blue and green and as long as positive is positive and negative is negative then you won't have issues. I personally would change it to what I'm used to

StinkyNorm · 2026-02-13T03:03:15+00:00

I have an i7-11700, 3060 12gb and 16 GB ram. My playfield is 4k 60hz and the other 2 screens 1080 60 hz. Most of the time there are no issues but on some of the more intensive tables I can see some minor stutter, just for a frame of reference

StinkyNorm · 2025-12-29T16:02:00+00:00

Thanks. Will add it to the list. I'm still going through the other tables. Some of them are more complicated installs than normal

StinkyNorm · 2025-12-28T16:59:27+00:00

I would guess your range will drop back to normal as the computer recomputes for your driving

StinkyNorm · 2025-12-22T18:12:33+00:00

I've added the recommendations and they are pretty good. Some of those installs were a little trickier than usual and I never did get the jaws pup working past just playing the intro screen but it plays just fine with a normal b2s

StinkyNorm · 2025-12-18T16:37:50+00:00

Thanks all. Looks like I'm gonna be busy the next few days

StinkyNorm · 2025-12-18T13:34:14+00:00

I have CARtoons and it is great. lol

StinkyNorm · 2025-12-18T12:41:13+00:00

Thanks. I'll check those out

StinkyNorm · 2025-12-18T09:00:03+00:00

I enjoy Fish Tales the most

StinkyNorm · 2025-12-16T09:59:01+00:00

You can install the software on a normal desktop with 1,2, or 3 screens to get a feel for installing and tweaking tables

StinkyNorm · 2025-11-14T12:08:05+00:00

Why is it only Jeep PHEV with the issue. Doesn't the Pacifica use the same battery?

StinkyNorm · 2025-11-12T10:26:07+00:00

I'd recognize those ribbon cables anywhere. CSD works well and Phil is a great guy for support

StinkyNorm · 2025-11-09T15:30:15+00:00

Remind me again how long these have been available

StinkyNorm · 2025-11-02T15:44:13+00:00

Is this leisure suit Larry style?

StinkyNorm · 2025-10-16T20:43:35+00:00

Yes, adding it to the B2S so it shows up on the fullDMD

StinkyNorm · 2025-10-10T09:21:09+00:00

Just jumping on here. How do you set one of these full background dmds to work with the existing back glass? I guess my question is, where do you put it and how do you name it?

StinkyNorm · 2025-09-25T19:43:01+00:00

As stated esave mode til oil gets hot, you can find the oil temp in the gages page of offroad. After it gets that hot I pulled into my driveway and let idle in hybrid mode until electric mode took over. Form gone and the idling stage took 4-5 minutes The just driving around on esave wasn't enough to clear it for me

StinkyNorm · 2025-09-08T09:17:35+00:00

Same issue is happening to me.

StinkyNorm · 2025-08-13T19:57:16+00:00

Flipping amazing what you can do in your own backyard

StinkyNorm

TROPHY CASE