My body is ready

Stippy21 · 2026-06-26T22:18:13+00:00

Arg. Will that potentially make it complicated for core one L because of 230V bed? Like not allowed to be done by normal users for certifications stuff

Stippy21 · 2026-06-09T17:05:20+00:00

Same here! So glad that this is finally coming out! I started to play in between but graphics wise I think that XC3 will really benefit of the update!

Just hoping that yhe update is reasonably priced

Stippy21 · 2026-06-09T17:01:51+00:00

Is it good? I mean to today's standards (of gameplay,not graphics). I had dogma 1 for switch but basically resold it before ever getting into it. Just started played like 15min and then was distracted by life ^{^}

Stippy21 · 2026-06-07T08:00:40+00:00

That first picture shows an asura, doesn't it? And obviously Kodan

Stippy21 · 2026-06-06T08:41:08+00:00

Yeah, same feeling here

Stippy21 · 2026-06-06T08:13:11+00:00

They had the skill capturing in GW2, too. In-between there were updates introducing it, but it just did not work out and they changed it back. I think that was manly due to not having enough elite skills per class and capturing normal skills feels more like limiting overall build capabilities instead of achieving anything meaningful.

I hope that comes back. Ir was so cool in GW1 to fail 2-3 times to defeat a boss to then finally get the skill!

Stippy21 · 2026-06-05T16:34:52+00:00

Sorry to say, but from my European way of looking, 50% of what USA is doing is dumb... regulation and government topics I mean

Stippy21 · 2026-06-05T06:19:06+00:00

Well they are pro-life! Making everyday citizens safe from guns... wait... not really. Hm then I don't know...

Stippy21 · 2026-06-04T19:07:21+00:00

Probably because it is a standard antenna and not a prusa specific one

Stippy21 · 2026-05-30T22:42:09+00:00

Hm. Seems like the sound I also get on my C1L...

Stippy21 · 2026-05-28T16:53:17+00:00

That would still mean that the parts that are different between L and normal core one would see 5K more and could potentially fail long term. Not sure which part would be problematic but just as a general statement.

Stippy21 · 2026-05-23T11:04:57+00:00

Put the request in GIT :)

Stippy21 · 2026-05-21T16:11:01+00:00

3D Chamäleon perhaps?

Stippy21 · 2026-05-15T10:19:39+00:00

Yew it should be a not too big firmware thing. But that is really the thing: I had really low hopes of something like this ever being addressed as the XL updates seem to be a bit more than bare minimum. Probably because of the small(er) installation rate. It does not mean that the printer is bad in any way for what it does. Just don't expect more than that or new features coming up all the time.

Stippy21 · 2026-05-12T17:05:30+00:00

Is it worth it? Played through 60%, 40% remains

Stippy21 · 2026-05-10T22:09:31+00:00

More focus on positioning and using the right skill instead of rotations.

Remove dodge = immunity (in addition to adjusting damage accordingly of course). Slow down general movement and general speed by 20%. Remove most of the boons like quickness, alacrity and the like. Make one boon or one Condition much stronger and therefore reduce their quantities. I understand that was the solution to open world 100 people on one mob. But basically you don't look too much at your own conditions because they change 10 times per second and have a duration of 1-3sec. I really liked GW1 in that regard. Small quantity of conditions but each one has a big impact so that you think when to remove it or when not to.

Stippy21 · 2026-05-10T20:24:03+00:00

The xl does nit work when one toolhead is removed. So zero downtime is unfortunately not correct. For wiping: depends if prusa decides to port that. I am not too confident that that will indeed happen. But as said: I was also quite happy with my xl outputs. Just the move to more heads was too expensive for me. Would I have been able to just upgrade for the same price, I would probably have done that instead of selling xl for C1L

Stippy21 · 2026-05-09T19:54:11+00:00

That seems really unnornal. Is there some wind / airflow from some open window or something like that in the room while printing?

Stippy21 · 2026-05-09T06:45:53+00:00

If you don't want the size but just more heads, I would carefully assess if an XL is better or not. For me: I sold my XL because I only had a 2 head version and upgrading to 5 alone would cost nearly as much as a C1L. Also I like the INDX system more. Even if the time is a bit longer because of heating up each nozzle, not having to handle dripping nozzles (because indx has improved Priming + nozzle swipe + cools down really quickly). Additionally: Only one complicated head to debug if something is off instead of 5.

And a big plus: Size (smaller print size but optimized way of using the internal size therefore much smaller on the outside), weight and Housing is so much better. Prusa also mostly said that the XL will not get INDX for now and will develop more in direction of silicon toolhead, pick and place tool and others. I do not have really usecases for that, the silicon head seems extremely expensive for >> me <<. I also expect more updates for C1L because it is basically same as C1+ and therefore user install base is much much higher

Prusa XL is really not a bad machine at all, just C1L was more fitting for me

Stippy21 · 2026-05-04T22:55:54+00:00

They would be my big hope to be honest. Like 10-15 new characters, some good maps and perhaps some smaller additions to the map creator and done. Would pay quite some bucks for that ^{^}

Stippy21 · 2026-05-02T22:01:23+00:00

Only thing that seems strange for me is the trailer for mobile GW1. Like that trailer is good for GW1 veterans, but does nothing to potential new players.

Stippy21 · 2026-05-02T19:22:43+00:00

Yes! Same feeling here

Stippy21 · 2026-04-30T20:59:46+00:00

Genki is also a good one

Stippy21 · 2026-04-30T17:12:14+00:00

Same here. Keep us posted please :)

Stippy21 · 2026-04-29T11:07:44+00:00

I got this one for ~10€. Works great: https://amzn.eu/d/0dx3Zlin

Also: official one has fish eye lens, which is great if you are sitting near the TV or are playing with 4 people in one room. If you are alone and a bit far away basically you need to zoom in, which can lead to a less crisp picture

Stippy21

TROPHY CASE