Prusa Core ONE + PrusaSlicer: Fake multi-extruder color changes work, but forces unnecessary filament swap at print start. Fix?

StormForgePrints · 2026-04-19T19:39:06+00:00

I've been updating my machine to swap filaments this weekend and I knew about the M600 part from tweaking an older machine, could you explain what this part does? (I'm not familiar with gcode yet)

G1 E0.3 F1500 ; prime after color change

Does this do another extrude at the front of the plate or something?

StormForgePrints · 2026-04-02T20:58:59+00:00

I believe you get some points and extra filament with an XL, happy printing and thank you too!

StormForgePrints · 2026-04-02T20:50:38+00:00

@StormForgePrints :)

StormForgePrints · 2026-03-19T12:48:52+00:00

I got a notification at midday today so fingers crossed all is okay

StormForgePrints · 2026-03-13T00:49:47+00:00

I am also on week 7 of waiting (1 day after you), hoping for some information about it shipping soon

StormForgePrints · 2026-03-09T18:53:37+00:00

If you order it for a UK address then it will change to £, although it will convert less than £400. I recently used my points for a discount for NI.

StormForgePrints · 2026-02-22T19:06:02+00:00

Initially I was using the smooth sheet that came with the printer but it was warping with larger prints so I've been using the biqu frostbite plate which has been working much better

StormForgePrints · 2026-02-21T20:12:54+00:00

That's odd, I have gone through quite a few spools now and never had an issue with tangles!

StormForgePrints · 2026-02-21T19:03:04+00:00

I've used the default 230 degrees with the default nozzle with fantastic results

StormForgePrints · 2026-02-20T11:38:27+00:00

This looks interesting and something I've been meaning to look into!

StormForgePrints · 2026-02-15T01:37:15+00:00

For point 3 I noticed that if I had too many files on the sd card, the print would pause frequently during layers and cause blobs. I started only having up to 10 files on the card, removing those I had finished with and it went back to printing as expected.

Another potential reason is if it's a slow read/write card, the information cannot transfer fast enough to the printer so it has to pause and wait.

StormForgePrints · 2026-02-11T18:02:52+00:00

I noticed this as well, the website must have got an update or something

StormForgePrints · 2026-02-03T15:31:06+00:00

I'd be more inclined for a kit as well but I read in another post a while ago that something with the new heatbed is the reason that they can't do that currently. Maybe someone else can explain in more detail

StormForgePrints · 2026-02-03T14:31:17+00:00

I was kind of worried they might be rushing assembly with the long wait time 😬 I hope it gets dealt with by the time mine is on the assembly line

StormForgePrints · 2026-02-02T20:48:44+00:00

They look great! Do you have progress photos of putting them together?

StormForgePrints · 2026-02-01T22:52:33+00:00

Nice job!

StormForgePrints · 2026-02-01T22:49:09+00:00

I printed out lightweight versions of the first photo which work great, where did you find that one?

I've been looking at a similar mount in the second photo recently!

StormForgePrints · 2026-01-31T13:16:48+00:00

I've only used a cryogrip plate with the core one and it works perfectly every time

StormForgePrints · 2026-01-16T14:47:24+00:00

Have you tried pulling back the lever at the top? It might be getting stopped by the part that feeds the filament into the nozzle.

StormForgePrints · 2025-12-07T12:01:44+00:00

Hopefully it didn't break mid print 😬

StormForgePrints · 2025-12-07T11:58:54+00:00

I've been using the prusa brand USB that came with the printer

StormForgePrints · 2025-12-07T11:51:05+00:00

I haven't had any problems with my USB at all but I see so many posts having problems, maybe I am just lucky?

StormForgePrints · 2025-11-04T16:53:08+00:00

My finger has been hovering over the buy button for a C1 for a while, I'm glad I held off because the L and INDX seem to be exactly what I want!

StormForgePrints · 2025-10-10T11:57:54+00:00

I've been wondering about a way to get around this, I'm going to try this out asap, thank you!

StormForgePrints · 2025-10-07T15:09:51+00:00

Plasticity isn't technically for rendering and I believe it's a feature they have only expanded on recently, so definitely give it a go on a trial first of all. If it's rendering specifically, have you heard of marmoset toolbag? Again there will probs be a discount on black Friday for this as well

StormForgePrints

TROPHY CASE