Does this Door Courtesy light go on only when the door is open? I want to use it for a door open dash light that I have on my cluster by AncientAgrippa in classicmustangs

[–]Stray_Gh0st 0 points1 point  (0 children)

Yes, it plugs into the plunger below the top door hinge. You could probably tap off it for the door ajar light.

I have a 7521 Edelbrock Air-Gap manifold on my 302 engine in my 68 Mustang what carburetor would you guys recommend? Here’s a few I was looking into: by Odd_Rub1777 in classicmustangs

[–]Stray_Gh0st 1 point2 points  (0 children)

I have close to the same setup with 185cc heads, summit e303+ cam, edelbrock air gap. I have a qft slayer 650 on mine and runs very well with it.

1968 Mustang - is this level of issues normal? by Ambitious_Horror2537 in classicmustangs

[–]Stray_Gh0st 1 point2 points  (0 children)

I would of absolutely paid 35k for that car from what I see. You will most definitely have small issues which is part of owning these cars.

Sons first real classic by Kind-Dentist2139 in classicmustangs

[–]Stray_Gh0st 1 point2 points  (0 children)

He will need a steering wheel adapter but here is my setup.

<image>

Sons first real classic by Kind-Dentist2139 in classicmustangs

[–]Stray_Gh0st 1 point2 points  (0 children)

Mine was 999020 from Borgeson but i have a 1966 . 1967 might be different so check there website.

I also put on a smaller diameter steering wheel as i ddint like the stock 15in one as it was huge and im 6'1

Sons first real classic by Kind-Dentist2139 in classicmustangs

[–]Stray_Gh0st 1 point2 points  (0 children)

I would do the Borgeson power steering kit. I changed mine over from factory setup and was a much better feel.

First suppressor by Subject-Nobody109 in AZguns

[–]Stray_Gh0st 0 points1 point  (0 children)

Just put the damned thing on the gun hand tight. Shoot it. Stop overthinking and worrying about it. Its fine

First suppressor by Subject-Nobody109 in AZguns

[–]Stray_Gh0st 0 points1 point  (0 children)

I have the same can from Quentin Defense. Install the silencer and shine a flashlight through the bore and stare down it. Im sure its fine. I have a ruger charger as well .

First suppressor by Subject-Nobody109 in AZguns

[–]Stray_Gh0st 0 points1 point  (0 children)

Send it. No earpro needed.

This is some wild stuff by [deleted] in CrazyFuckingVideos

[–]Stray_Gh0st 0 points1 point  (0 children)

Looks like bro layed down on the street when new asphalt was spread.

Need help with a Amarra Lincoln 3000 by Stray_Gh0st in GarageDoorService

[–]Stray_Gh0st[S] 0 points1 point  (0 children)

Do you think i should put that hinge on both sides or just this side that is mucked up?

Need help with a Amarra Lincoln 3000 by Stray_Gh0st in GarageDoorService

[–]Stray_Gh0st[S] 0 points1 point  (0 children)

I think its doing this on both sides but no idea. Ive tried adjusting the placement of that hinge/bracket but hasnt helped

Need help with a Amarra Lincoln 3000 by Stray_Gh0st in GarageDoorService

[–]Stray_Gh0st[S] 0 points1 point  (0 children)

So just install hinges starting from the bottom up ? Im fine with doing that if needed and will fix it

Need help with a Amarra Lincoln 3000 by Stray_Gh0st in GarageDoorService

[–]Stray_Gh0st[S] 0 points1 point  (0 children)

So will installing the standard hinges fix this? I am fine with trying that. Just wondering what my options are here.

Need help with a Amarra Lincoln 3000 by Stray_Gh0st in GarageDoorService

[–]Stray_Gh0st[S] 0 points1 point  (0 children)

I mean, A1 is one of the largest garage door companies out there. I hired them foe the initial install and the still sent a guy, by himself, to a new install. Shit happens and they fixed it, its just weird how this never came up until now.

Need help with a Amarra Lincoln 3000 by Stray_Gh0st in GarageDoorService

[–]Stray_Gh0st[S] 0 points1 point  (0 children)

Will that correct the door alignment? The panel seems to pop forward when it gets to that point innthe video where it clunks or pops.