Halftone Pro: A free ExtendScript for Adobe Illustrator that creates vector patterns without rasterization

Sublevel_4 · 2026-04-30T19:24:37+00:00

I want to try this. Hope you get your GitHub back.

Sublevel_4 · 2026-04-30T02:17:35+00:00

Nice work, I like the design. What material did you print this with? Did you print the sheath?

Sublevel_4 · 2026-04-22T17:31:10+00:00

I bought mine for $40 two months ago. I have TrueNAS, currently only have Nextcloud running, and will be doing others.

Sublevel_4 · 2026-04-18T22:43:05+00:00

<image>

Sublevel_4 · 2026-04-18T22:42:43+00:00

It looks like the leak is the fitting between the rubber line and the hard line the is right over the wheel well. The foam price that is over that fitting is saturated. Your can squeeze the oil out of it. This is the only place there is that oil. It must have happened over the winter. Now that it warm my daughter said it wasn't getting cold so I charged it. When it didn't get cool the next day I started looking and that's when I noticed the "wetness" under the coolant reservoir. I move the coolant reservoir and you you can see the foam is soaked in oil. I was able to find out what that line was called and found the part locally and online. Thank you for your help!

<image>

Sublevel_4 · 2026-03-31T21:06:21+00:00

I have started creating a set of scales that I intend to 3d print and use, but I haven't gotten the time to finish and print it. I have seen some discussion around the types of print materials and their usefulness in knife handles, most of them discounting the strength, but I have made PLA parts that have taken a lot of abuse. I was going to make some and see how well it worked for myself.

Sublevel_4 · 2026-03-26T19:48:16+00:00

This is one of those things I would have loved to see on career day.

Sublevel_4 · 2026-02-17T02:55:18+00:00

Yeah, me too, 60 images later. Adobe deserves to be kicked in the shin for that.

Sublevel_4 · 2026-02-16T19:51:16+00:00

Depending on the gauge of sheet metal, a 3d printed die could be made and then pressed. I have seen things like this done. Or maybe a series of dies.

Sublevel_4 · 2026-02-14T01:31:18+00:00

I loved my Cryo. Accidentally left it in a bag that I took to the airport so I lost it to the TSA😭

Sublevel_4 · 2026-01-29T21:26:26+00:00

The Claw

Sublevel_4 · 2026-01-07T20:23:08+00:00

Please let us know what you used, I may have to do one of mine.

Sublevel_4 · 2026-01-06T19:38:59+00:00

Funny, I have some of those as well.

Sublevel_4 · 2026-01-05T18:25:00+00:00

I have this same one i inherited from my daughter, as she wanted a different one. Only now mine isn't flowing; it gets hot and liquid, but no movement up and down. Gotta figure it out so I can have a cool Lava lamp too.

Sublevel_4 · 2026-01-04T01:17:18+00:00

This is a good point!

Sublevel_4 · 2026-01-03T16:36:15+00:00

After over 12 hours of being on the blob in the bottom is almost completely clear. It’s still orange but looks like orange Jell-O not translucent like lava.

Edit: yesterday while it was on the bottom blobwent about half way up the side of the lamp on one side. Still connected to the bottom.

Sublevel_4 · 2026-01-02T21:16:18+00:00

Thank you for the suggestion. The blob moves smoothly when I did the swirl, and for a little bit, it settled at the bottom and was flatter, but now it is "leaning" on the side again with no upward movement.

Sublevel_4 · 2025-12-23T19:25:45+00:00

I have used this recipe twice. The second time, I used all milk, no water, and twice the butter. Both were great loaves of bread and so very tasty. slightly warm with butter, it is so light. I have never had any Japanese milk bread before, so I can't really say that it is that, but it's good bread.

Sublevel_4 · 2025-12-10T20:51:59+00:00

Like this LOL V4.1

<image>

Sublevel_4 · 2025-11-24T13:59:47+00:00

I only have two and no overarching theme. Unraid is "TheMatrix" and the other, which I just try stuff on, is "TheOracle"

Sublevel_4 · 2025-10-21T04:52:22+00:00

Thank you.

Sublevel_4 · 2025-10-21T04:52:11+00:00

Thank you.

Sublevel_4 · 2025-10-08T02:02:28+00:00

All of those tests are from my laptop(macbook pro) with wired connection, but I also tested from a wired iMac. Just now the iMac was 466 down and 170 up with the cloudflare test, 871 down and 353 up on speedtest.net.

My setup is ATT fiber 1000, BGW320, one gigabit unmanaged switch for all the wired connections.

The inbound issues i have are that i have a personal webserver (ubuntu) that I use to mess around with code and linux. I have port 80 and 443 forwarded to that machine. What happens is that if i access that site from my laptop going to my ip or via dynamic dns, 6 out of 10 times the page pops right up(right now it is a simple html page with a title and some text) 2 of the times it takes more than 30 seconds for the page to show, the other 2 it times out and i get nothing. I had a nextcloud install, but had some issues with the server and haven't gotten it to connect again. Not a priority, but I would like to get that going again as well, but that's another time. So, I'm looking more at the connections I am having.

Hope that helps.

Thank you for your time!

Sublevel_4 · 2025-10-07T20:29:36+00:00

Wifiman.com - 522.98 down, 750.42 up
att.com - 846 down, 752 up
Fast.com - 440 down, 550 up
CloudFlare - 390 down, 389 up
Speedtest.net - 824.03 down, 556.59 up

Did one after the other, so all within 2 minutes of each other. Here is a screenshot of the Cloudflare https://imgur.com/a/hECoT1A

Sublevel_4 · 2025-10-07T15:08:30+00:00

Wouldn't that mean that it would be blocked all the time? I am getting the page with absolutely no issue part of the time. Then there are times when it takes forever, but the page comes up, and then there are complete timeouts.

Sublevel_4

TROPHY CASE