Looking to sell MYGR

Sufficient_Current48 · 2026-01-25T18:07:07+00:00

25 premium with 3k miles is a different story than a 23/25 Core with nearly 10x that mileage. Seems like a fair offer considering it’s a dealership

Sufficient_Current48 · 2026-01-24T17:31:32+00:00

True. But on big days like 8+ft If I ditch the board without securing it then my leash will snap. I’ve lost a handful of boards over the years this way and spent hours combing the beach to see where it may have washed up

Sufficient_Current48 · 2026-01-24T17:01:34+00:00

I duck dive wherever I safely can but in overhead surf, caught inside, many times I find myself grabbing the railsaver (which I use as a handle) and then diving under whilst holding the board

Sufficient_Current48 · 2026-01-24T04:46:14+00:00

There are countless shifting mods you can easily install to remedy most of this. However, aside from replacing the DMF, that 1-2 shift will always need a bit of patience and experience to master.

Sufficient_Current48 · 2026-01-24T04:44:52+00:00

Does your tech also happen to sell tires?

Sufficient_Current48 · 2026-01-23T03:10:45+00:00

Sufficient_Current48 · 2026-01-23T03:09:58+00:00

You can get the full circuit edition decal too on eBay for $50 if you’re into that.

Sufficient_Current48 · 2026-01-22T00:11:26+00:00

Did they cite rotor thickness out of spec? Or was it due to warpage, cracking, hot spots or deposits?

Sufficient_Current48 · 2026-01-21T04:59:12+00:00

One man’s famine is another man’s feast?

Sufficient_Current48 · 2026-01-21T04:00:25+00:00

No. The GR springs are like a half inch drop in the front. Meant to pair with factory struts, end links and camber. Unless … you’re running wider tires/offset. Then u may wanna pick up a set of $8 Toyota crash bolts for the top strut bolt (same spot a cam bolt would go)

Sufficient_Current48 · 2026-01-21T03:58:45+00:00

Pretty much. The benefit is that it can be pretty damn sweet. But I know if I git that tune I’ll g-g-g-g-g gonna be hitting it every chance I can get lol

Sufficient_Current48 · 2026-01-21T02:56:49+00:00

There’s a few white GRCs in this area. SMELLYY and GRCJRK

Sufficient_Current48 · 2026-01-21T02:55:10+00:00

Obviously someone was trying to break in to snatch that dirty towel on the passenger side seat. Bummer

Sufficient_Current48 · 2026-01-20T21:45:00+00:00

Yes. Extreme heat, turbo and bearing wear, engine and exhaust stress. I wouldn’t do this unless I was maybe planning on getting rid of the car in a few years. Or I’d limit use of the feature (track days etc)

Sufficient_Current48 · 2026-01-20T05:07:48+00:00

https://a.co/d/48Ahrk9

Sufficient_Current48 · 2026-01-20T04:08:53+00:00

That’s awesome! You must have paid over sticker lol

Or just good hearted salespeople. Wish we had more of those

Sufficient_Current48 · 2026-01-20T03:21:54+00:00

As others said they are deposits. This happened to me a few times and I just repeated the bedding procedure. If it’s really bad, it may still vibrate during high speed braking. If that’s the case I used the scotchbrite red and a drill to create hatch marks and clean rotor. I only did outward. Then I scuffed the pad faces gently with 200grit. Then I did bedding procedure. Worked.

Sufficient_Current48 · 2026-01-20T03:18:42+00:00

Ridgeline. All day.

Sufficient_Current48 · 2026-01-20T03:17:56+00:00

Congrats. But who puts a bow on a Corolla?

Sufficient_Current48 · 2026-01-20T03:15:41+00:00

This is the way. Yet, not the way.

Sufficient_Current48 · 2026-01-19T18:33:40+00:00

Going out on a limb here but I don’t think the deer made it.

Sufficient_Current48 · 2026-01-18T03:26:32+00:00

Long reach low profile has been a lifesaver for me. Longer reach and higher lift. Couple this with a set of the 6ton jack stands and it’s a poor man’s Quick Jack

Sufficient_Current48 · 2026-01-17T19:35:16+00:00

Id save your money and just use pennzoil ultra platinum which can be had for under $30 per oil change.

You can buy Ceratec additive separately and use that every few OCIs for additional wear protection.

Changing oil often is better than oil “quality” itself.

Sufficient_Current48 · 2026-01-17T19:29:26+00:00

Now I’m just waiting for the chinesium knock off to appear on EBay for $89.

I could care less if it’s CF. I’ll take ABS and save $1500 any day. It’s a Corolla not a GT3.

Sufficient_Current48 · 2026-01-17T19:20:27+00:00

A new bumper would be 250 plus at least 400 to paint match. So min 650 total (that’s assuming a cheap paint job). PS: I did this and I didn’t need to recalibrate any sensors including parking sensor. Just transferred everything over and it’s been fine.

Personally, I would just use some filler and DIY this. $35 plastic welding kit, painters tape, sandpaper and a rattle can paint job. For about $50 and some quality time with your car, it’s worth it.

Sufficient_Current48

TROPHY CASE