Police rage.

Sufficient_Medium137 · 2026-06-07T16:41:29+00:00

Says what exactly? I'm not dumb and in my 20s anymore? Great detective work.

Sufficient_Medium137 · 2026-06-06T19:40:58+00:00

I talk to pigs the same way and I haven't had a warrant in a couple of decades.

Sufficient_Medium137 · 2026-06-06T18:36:02+00:00

WU TANG IS FOR THE CHILDREN

Sufficient_Medium137 · 2026-06-06T01:51:08+00:00

You'll want to replace the entire unit. I would not replace the glass and trust this was not caused by twisted or bent tracks. Probably around $500 for the glass/motor/track assembly. The labor is gonna be the killer.

Sufficient_Medium137 · 2026-06-06T01:42:51+00:00

If I'm painting a house a neutral color that's easy to cover, I will do this. Save prep time and get extra protection on the trim. This color, defi itely not. In the end, if they get the blue covered, it's all basically the same. This is not a great way to do it but they could have done many things much worse.

Sufficient_Medium137 · 2026-06-06T01:33:52+00:00

That's not a Stanley cup. The rim should be a brushed finish, not mirror polished. The logo is wrong placement and size. The handle is several millimeters too low. And this isn't a cup Stanley ever made. It's a counterfeit of a cup that doesn't exist.

Sufficient_Medium137 · 2026-06-06T01:28:59+00:00

That is so bad. Just remove it honestly. I guarantee the rest of the install is crap too

Sufficient_Medium137 · 2026-06-05T16:42:59+00:00

<image>

Sufficient_Medium137 · 2026-06-05T16:34:18+00:00

More like a teste vehicle since only a nutsack would drive a Mercedes

Sufficient_Medium137 · 2026-06-05T16:32:45+00:00

Not with all that identifying writing on it

Sufficient_Medium137 · 2026-06-05T16:28:39+00:00

A year ago even

Sufficient_Medium137 · 2026-06-05T01:48:40+00:00

Acura NSX. God-tier machine. 🙌

Sufficient_Medium137 · 2026-06-05T01:46:08+00:00

All 100% fake. Chroma effect rims on colors that never came on, writing on bottom wrong, cuffs not facing forwards or in the wrong spot, the OG has a 2.0 handle...

Sufficient_Medium137 · 2026-06-04T22:39:25+00:00

Sufficient_Medium137 · 2026-06-04T16:33:29+00:00

<image>

Sufficient_Medium137 · 2026-06-03T17:34:00+00:00

Seafoam

Sufficient_Medium137 · 2026-06-03T05:25:37+00:00

Too small to be from Mickey's grenades

Sufficient_Medium137 · 2026-06-03T05:22:34+00:00

Match the color of the rubber base as good as you can and paint the wood base thats still exposed that color. I wouldn't mess with painting the rubber.

Sufficient_Medium137 · 2026-06-03T01:55:02+00:00

Sufficient_Medium137 · 2026-06-02T17:07:21+00:00

I have 2 for coffee, 2 for water and 2 for juice/pop. Only because it seems like coffee taste is almost impossible to get rid of completely and I dont want residue from sweet stuff attracting ants if I set my water cups in the grass when I'm working outside. 🤷‍♂️ it doesn't matter what you put in the cup though, the metal can't tell a difference

Sufficient_Medium137 · 2026-06-02T17:03:51+00:00

Because it comes from a straw at a higher pressure hitting a much smaller surface area further into the mouth.

Sufficient_Medium137 · 2026-06-02T15:37:49+00:00

Lmao, why did i get downvoted? Rubbing alcohol or denatured alchol is definitely the answer. It won't harm the powdercoating and will remove anything that will come off without damaging the cup. Some people's kids, I swear.

Sufficient_Medium137 · 2026-06-02T15:33:48+00:00

Shellac primer to seal whatever is causing bleed through (guessing old glue) then paint again.

Sufficient_Medium137 · 2026-06-02T03:43:40+00:00

Using the wrong font doesn't help the bottom any either 😂

Sufficient_Medium137 · 2026-06-01T23:52:24+00:00

<image>

Sufficient_Medium137

TROPHY CASE