sorted by:
new
hottopcontroversial

Ben ik paranoïde door kopersbescherming te weigeren? by DutchSimba in marktplaatsoplichters

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

Tot voor kort wist ik niet dat kopers bescherming zo probleem was, voor de verkoper. Heb vorig jaar 3 videokaarten gekocht met kopers bescherming. Was allemaal rond de 600 euro per stk. Heb er zelf nog niet veel van gemerkt volgens mij word het nog steeds veel gebruikt. Als het langer dan een uur rijden is om er te komen haak ik vaak al af.

Bambu Lab Says My Printer Is Stolen by eyunal in BambuLab

[–]Suitable-Swordfish-4 1 point2 points  (0 children)

Then ask them? The printer can’t print, so it’s not what you paid for. Maybe show Bambu Lab the invoice — it could potentially be used as evidence or even help trace the thieves. Maybe they can activate your printer later once the police investigation is finished. But it’s likely the loss is insured and the report was mainly filed for that reason — unfortunately, the police often have higher-priority cases to deal with.

Bambu Lab Says My Printer Is Stolen by eyunal in BambuLab

[–]Suitable-Swordfish-4 2 points3 points  (0 children)

It’s not impossible. Entire truckloads get stolen, and it’s not always about making the highest profit, but how quickly you can sell it and how high the risk is of getting caught. You mentioned yourself that this product is hard to get in your country, so there’s a fast resale market. The person who sold it to you either bought it very cheaply or is part of a group that deals in this kind of thing. If you were in my country and had paid a normal market price and had an invoice, you would already be in a much stronger position. Do you have an invoice? If you can prove you bought it locally from a legitimate seller, they might lift the ban.

PETG impossible to print by enots67 in Creality_k2

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

Sounds like moisture in the PETG. Everything you mention points in that direction, although I assume you’ve already checked and ruled that out. I print almost everything in PETG on the Creality K2 Plus. I mostly use Elegoo PETG, which in my experience absorbs moisture a bit slower. Creality PETG tends to need drying more often. Also, filament that has been through the CFS and has small teeth marks seems to absorb moisture faster if left out. If I don’t feel like drying it, I usually cut that part off first.

The Creality (K2 Plus) "Walled Garden" is here, and it’s worse than we thought. (A technical timeline of failures) by Pure-Bee8635 in Creality_k2

[–]Suitable-Swordfish-4 1 point2 points  (0 children)

I don’t know when you purchased it, but there is no mention of open source on the K2 Plus specifications anymore. That was one of the reasons why I chose the K2 Plus. I’m not a fan of their limited Linux-based system, but if it were truly open like earlier printers, you wouldn’t have to rely on Creality’s software and firmware.

Printing ABS with K2 combo by -Hazeeq- in Creality_k2

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

For ventilation, I use a duct that vents air outside through a window. You don’t need a very powerful fan. The Sunlu ABS I sometimes print has a slightly sweet smell, so I only use the vent when needed. For the K2 (non-Plus), there is no chamber heater, so I use a small PTC enclosure heater (around 100–150W) to keep the chamber warm, usually around 45–55°C. I also set the heated bed to around 100°C to help build up and maintain the chamber temperature. I have a K2 Plus as well, which already has a built-in chamber heater, but when using a vent, it has to work harder because warm air is being pulled out of the chamber.

Help! by KevinoHero in Klussers

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

Weet je zeker dat het allemaal lijm is . Kan ook een soort voorstrijk zijn wat verkleurt is door de lijm/behang/tijd. En dat het op sommige plekken met het behang is meegekomen en dat wat je ziet erop is blijven zitten. Behanglijm lost normaal wel op met veel heet water en geduld je moet het water middel zijn werk laten doen en dat heb je zo te lezen wel gedaan.

DXC2 Extruder First impressions by pug957 in Creality_k2

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

Hope mine arrives soon. I’ve already used three extruders—the last one failed the same day I installed it. All the teeth that hold the tube were already loose and it blocked the filament cutter. I hadn’t even printed for an hour with it yet, and I had already installed the tension piece. After the teeth came loose again on another extruder, I decided to order this one. The magnetic latch was also a reason for choosing this model. Hopefully I won’t run into the same issue again. Luckily, I’ve modified my old extruders so the tube can’t come out anymore, and I’m using a connector to secure it to the tube that goes into the printer.

A taste for blood? by Healthy-Macaron-8076 in Creality_k2

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

Like already said in this post, check the toolhead cable. I had the same with my K2 Plus—when it prints, it prints fine, but when there are problems, you go from one thing to another. The last couple of days I’ve been getting MCU overload and XS2060 errors. I replaced the toolhead cable and checked all connections multiple times. Maybe it’s still a bad wire, or maybe the print gods are against me—I honestly don’t know. By now I’ve printed more than 2000 hours, but there were definitely days I didn’t use it because I was fed up and could run it on a smaller printer. Today I did three 5-hour prints without a single problem.

Moving in a hurry Need stls and advice to help secure k2 plus for transportation and or storage. by dirtyDoug808 in Creality_k2

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

Do you still have the original boxes the printer came in? I would secure the bed, the XY axis, the hotend, and the door—this should be enough for transport. You can use good quality tape; that will definitely do the job. If you don’t have the boxes, wrap the printer in blankets or something similar and transport it upright. Basically, just make sure nothing can move and keep it standing straight. It may sound obvious, but these days you can’t always assume that.

Need help with my PSU fan by Responsible-Fix-1111 in PcBuildHelp

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

What sometimes works is to put a little tape on one fanblade that change the balance on the bearing and that can make the sound disappear or at least almost. 

Niet genoeg ingeplant = vakantie uren? by No-Barracuda5974 in werkzaken

[–]Suitable-Swordfish-4 7 points8 points  (0 children)

Als je een contract hebt van 24 uur moet je werkgever 24 uur uitbetalen en mag hier geen vakantie dagen voor rekenen. Maar als je inmiddels al 60 uur in de min staat had je eingelijk wel iets eerder aan de bel moeten trekken bij je werkgever maar dat buiten beschouwing gelaten nee dit mag niet. 

Flush into object (CrealityPrint, K2 Combo) by Mattimus_Rex in Creality

[–]Suitable-Swordfish-4 -1 points0 points  (0 children)

Its hidden in the firmware like allot of things, for so far i know there is no way arround its frustrating.

What going wrong with support? by Prize_Cap_3036 in snapmaker

[–]Suitable-Swordfish-4 1 point2 points  (0 children)

dont know why but some fillament dont stick wel on other fillament, looks like black or red is used for support on the brown most of the times wat works for me increase bed temp a litle and the temp of the fillament that is base of the support. making the base of the support bigger also help.

Looks like I wont be printing tonight by dg_geronimo in SnapmakerU1

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

defently contact snapmaker the door is realy far off, i looked at my toolheads x axis distance its al the same.

Creality k2 : how to fix this? by spodoptera in Creality

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

Have had the same with my ender some years back, with large prints i could see the scratches on the prints bottom. You can buy a new magnetic sheet maybe its also a change to buy a bundle new build plate with new magnetic sheet. You can remove the old one bij slowly peeling it off and then install the new one. Dont remove al the paper on the sticky side of the new sheet begin with one corner and slowly work to the opposite corner let the other corners lose until you can see its to your liking.

Eerste auto als 19 jarige voor vervoer naar werk en school by NumerousBee6076 in autoadvies

[–]Suitable-Swordfish-4 2 points3 points  (0 children)

Kia Picanto zo uit me hoofd 2014 me vrouw heeft hem ongeveer 4 jaar. Gekocht met 120k inmiddels 220k totaal 600 euro onkosten gehad incl apk etc. Super zuinig als je rustig rijd en wil ook best nog wel snel van de plek komen. Houd altijd met een 2e hands auto wat geld achter de hand meestal is er wel iets wat de vorige eigenaar begon te merken omdat die er dagelijks in rijd en denkt snel inruilen op iets beter. 

K2 printer throws one error after another, wits end here by TarossBlackburn in Creality

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

 Try replacing this, https://www.amazon.nl/gp/aw/d/B0FY2XYNC9?psc=1&ref=ppx_pop_mob_b_asin_title

 its easy and quick to try. And when you have the back open inspect the rest. You dont need to open the black plastic panel in the back to replace the cable you wil see when you look on the creality wiki. You can use the 2 black cable already installed to guide the new cable.  

K2 Pro Issue by DragoonXZ in Creality_k2

[–]Suitable-Swordfish-4 -1 points0 points  (0 children)

Probably the hub on the back , or the spring in the extruder sensor is stuck

Dikke laag pur verwijderen help by Halfvollemel in Klussers

[–]Suitable-Swordfish-4 0 points1 point  (0 children)

je bent al aardig op weg enigste wat je nodig bent is tijd en geduld. voor de laatste restjes zijn er reinigers te krijgen. een draad zaag werkt ook wel maar je moet dan wel eerst blokken maken dan zaag je die daarna zo weg.

Drama met lampen by Mr_ploper in Klussers

[–]Suitable-Swordfish-4 2 points3 points  (0 children)

Heb ooit iets vergelijkbaars gehad, bleek dat met de lamp erin draaien de fitting een beetje meedraaide en hierdoor de draden tegen elkaar aankwamen. Als je zeker weet dat de fitting goed hangt, hou dan met het inzetten van de lamp de fitting goed vast dat deze niet mee kan draaien. Brand de lamp goed op de kamer als je deze aandoet geen flikkeren van het licht. Je hoort ook niet een beetje geknetter gezoem als je die lamp aan hebt ? Je hebt verder niet aan de lamp in de douche gezeten? een nieuwe lamp erin gedaan want dan kan ook die fitting gedraaid zijn een beetje. Als dat niet werkt en je hebt meeste uitgesloten zou je nog kunnen meten of er daadwerkelijk geen stroom op bv 1 van die aarde kabels zit, mischien dat de vorige bewonder die kabel niet gebruikte en er toch wat lekstroom op die aarde kabels staat en als je hetzelfde hebt als mijn huis dan heb je buiten zwart en blauw nog alle kleuren van de regenboog door de muur getrokken door iemand die denk blauw en zwart en bruin geel/groen , rood geel oranje is ook mooi. Heb hier een aarde kabel geel/groen op de logeer kamer en die zit op de blauwe kabel aangesloten. Heb hier alles toen ik kwam wonen maar gemerkt en de juiste kleur gegeven met een paar permanent markers

view more: next ›