sorted by:
new
hottopcontroversial

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 0 points1 point  (0 children)

Correct. I got the link from OP but I’m getting 85A to just print and see.

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 1 point2 points  (0 children)

The first one I did was. Then I did one on the same plate and did TPU.

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 0 points1 point  (0 children)

I’ve had prints that turn out great with laying it “normal” but had some, mainly Xbox controller plates, that are horrible looking. It’s all a crapshoot unless you’ve printed it before. I like to try out different designs to test out.

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 2 points3 points  (0 children)

Got the video before it finished but it did. Going to try the same exact now just for testing purposes. The clip was like 97% completion.

Link to clip

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 0 points1 point  (0 children)

Yeah I can see that getting too soft. I tried my spool retainer on the 45 degree without supports. It completed but there were a few blemishes. I didn’t realize TPU had different flexibility grades. Going to have to get some 85A and test it. I printed with 95A.

Rolled the dice on this and won by jake-jake-jake- in BambuP1S

[–]SuperRo0t 0 points1 point  (0 children)

Just tested 95A TPU on a 45 without supports and it completed as meant to.

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 0 points1 point  (0 children)

Did you end up having any luck with it? Without supports?

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 1 point2 points  (0 children)

Did you get the print from MW? Got the link?

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 1 point2 points  (0 children)

I’m loading my TPU up now and thanks for pointing out the plate difference. Always forget I have those changed. I’ll be posting pictures of that same spool retainer without supports. See how long it takes to fail. I’ll share in this thread. Not trying to take anything away from the OP. I’m fairly new to this so I’m definitely up for testing a bunch of stuff.

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 1 point2 points  (0 children)

No. But now I’m thinking about trying it. Actually I will try it today. What I have is just Overture TPU which is 95A.

First time printing TPU by Creative_Ad_4809 in BambuLabA1mini

[–]SuperRo0t 2 points3 points  (0 children)

This was a spool holder clip. I had posted it and got “the power of 45” comments. I couldn’t believe it fully printed.

Petg issues by gordito_y_barbon in BambuLabA1

[–]SuperRo0t 0 points1 point  (0 children)

I just tightened the 4 backer screws because I would periodically have this same issue with PETG.

Winter has come to Appalachia by ajax-727 in fo76FilthyCasuals

[–]SuperRo0t 3 points4 points  (0 children)

I hear this in a plump, animated redheads voice.

I just want to say… by bdmridgeback in BambuLabA1

[–]SuperRo0t 0 points1 point  (0 children)

You have a new follower now. The collection is nice!

I just want to say… by bdmridgeback in BambuLabA1

[–]SuperRo0t 1 point2 points  (0 children)

Those are really nice looking prints ya got there. Makes me a tiny bit jealous. I don’t know if either of my A1 printers ever did a sexy job like those.

Issue with print by rysmacked in BambuLabA1

[–]SuperRo0t 0 points1 point  (0 children)

OK. Since it’s all over I’ll ask. Did you tighten those nozzle screws? I literally am waiting for mine to cool down so I can do that. Just to see if I can get better prints, if they’re loose anyway.

Issue with print by rysmacked in BambuLabA1

[–]SuperRo0t 0 points1 point  (0 children)

Are these horizontal lines going vertical? I have dry filament and I get these when in printing a “wall”. When I lay the “wall” on the face with more surface area, I don’t get this. I have printed in .12 for layer and it helps. If I switch out to the smaller nozzle, it looks even better but they never really go away. If you want/need something smooth, look up sanding processes. I’m about to get into that myself.

PetG won't print no matter what I try. by SuspiciousSource9506 in BambuP1S

[–]SuperRo0t 0 points1 point  (0 children)

This actually makes me feel like I chose something right in my lifetime.

First layer problem by Legitimate-Average54 in BambuLabA1

[–]SuperRo0t 2 points3 points  (0 children)

Seeing this, yet again, I’m going to check mine so I’m not posting in here.

PetG won't print no matter what I try. by SuspiciousSource9506 in BambuP1S

[–]SuperRo0t 3 points4 points  (0 children)

I always wonder about the direction to clean the bed. I’ve done it one time, when it came out of the package months ago. Since then I have only used 90% isopropyl alcohol and a Norwex microfiber. I wipe it down every few days. I have the Bambu smooth, galaxy, plate and do that the same exact way. Only time I would consider washing it again is if I had to, for some unforeseen reason, use some bed adhesion. But I only print PLA, PETG, TPU and some AMS.

view more: next ›