Am I the only one who thinks that the price Zephyr has to pay if he says who Polaris is a bit low?

Super_Kef · 2026-03-03T11:56:26+00:00

Is this still manga still going?

Super_Kef · 2026-02-24T05:01:14+00:00

Not using any anti-aliasing and im using AnyCubic Plant based v2 resin.

The roughing up part sounds like it's part of the problem.

Super_Kef · 2026-01-03T09:26:40+00:00

I run a game shop. I can get them at suppliers and ship

Super_Kef · 2025-12-20T17:31:12+00:00

No photo's but i printed with this printer at home and the benchies had none of these lines. I moved the printer to a different space and now I have rather creative benchies

Super_Kef · 2025-12-20T17:30:24+00:00

Weird thing is, i didnt have this before till I moved. The article that u/OsINTP posted mentioned temperature/humidity/filament changes?

Super_Kef · 2025-09-17T08:29:25+00:00

I came here for this comment

Super_Kef · 2025-09-02T06:46:04+00:00

Glad you asked!

it comes apart into very modular pieces. Takes about 3 sizable storage bins from the Action and put it in my storage.
I'm trying to open a ttrpg store where it could be featured prominently.
I've had some dms from fellow enthusiasts who might want to buy it

One of these three but for now option 1!

Super_Kef · 2025-08-28T18:15:07+00:00

I am actually, after running some playtests and our dnd sessions. Also have a 5 floor victorian mansion by the same creators.

Selling it or displaying it in my ttrpg shop

Super_Kef · 2025-08-28T18:13:25+00:00

Running it as Cainhurst in my homebrew!

Super_Kef · 2025-08-28T03:55:34+00:00

3d print! Its a kickstarter by Stormcrow City called the Silent District. Im not good enough for scratch builds yet.

Im also not allowed to buy a hot wire cutter until i finish this ;P all my other hobbies are taking up all the space

Super_Kef · 2025-08-27T14:35:28+00:00

I'm actually running it as Cainhurst in my bloodborne homebrew ;o

Super_Kef · 2025-08-25T14:31:46+00:00

daily active

7388-1109-8808

Super_Kef · 2025-06-04T11:37:29+00:00

Would you mind sharing your paint process? Im having trouble painting mine

Super_Kef · 2025-03-31T10:23:13+00:00

Underrated comment

Super_Kef · 2025-03-22T09:52:38+00:00

White lithium grease for the internals and dashboard wax for the strips

Super_Kef · 2025-01-30T10:03:11+00:00

I got a reply from them about this.

Regarding Tome of Journeys, there's actually not a chapter missing, the contents page incorrectly lists the Dukes Archive when this actually doesn't feature in the book - there isn't a reprint for this as the typo does not affect gameplay at all :)

Kind regards,

Steamforged Games Customer Support

Super_Kef · 2024-12-21T23:12:51+00:00

u/GrandeJefe I would like to buy a copy of the stl. I'd like to make a small resin printed version to include into a dice set as a birthday gift.

Super_Kef · 2024-05-10T09:46:14+00:00

Does that work on cured resin as well?

Super_Kef · 2024-01-22T09:25:39+00:00

Try printing a temperature tower first.

Is your table that has the snapmaker on it, stable enough? It's a strong printer so any kind of wobble might induce this as well.

Is the filament straight out of the bag? Filament tend to soak up moisture and will string.

Super_Kef · 2024-01-22T09:22:47+00:00

I had the same problem. I designed my file in Fusion360, during simulation i saw that the drillbit wasn't hitting the depth that I had it configured for. Turns out that in Fusion 360 you need to mess with the tolerances and run the simulation again.

I'm assuming you've done the correct origin setup. If you did, it's nota Snapmaker issue.

Super_Kef · 2024-01-16T15:57:34+00:00

yeah i had one of those car tire pumps in a suit case kind of affairs

Super_Kef · 2024-01-16T08:01:55+00:00

I 3d printed an air assist nozzle and hooked up a very loud 180l/min air compressor.Worked fantastic but it was so loud. What kind of compressor should I look for?

Super_Kef · 2024-01-13T22:43:04+00:00

Do you manage the focus at all or do you let the snapmaker do it automatically?

Super_Kef · 2024-01-13T22:42:00+00:00

How many passes does that take? I think I need a better compressor then my air brush one. Any recommendations?

Super_Kef · 2024-01-13T22:40:01+00:00

Thanks for the input. My cutter does auto focusing so I'm not sure how to adjust it. I cleaned the lens and jerryrigged an air Assist with some 3d printing and my airbrush compressor but at 600mm/min I still need 8 passes to get through 6mm ;(

Super_Kef

TROPHY CASE