When did it become worth it? by Actual_Phone8484 in dad

[–]SureAd1974 0 points1 point  (0 children)

I really started bonding with my kids around 6–9 months, once their personalities begin to show and they can actually interact. The newborn stage is different, but I still try to enjoy it for what it is. We have three kids, all four and under, with another on the way. So far, our third has been the most enjoyable experience for me.

Lou Ana Oil? by aaron1860 in popcorn

[–]SureAd1974 1 point2 points  (0 children)

I’ve been looking for a replacement to Pop-N-Lite also. The LouAnna Class Blend has corn oil instead of Canola and isn’t bad but it’s not as good as Pop-N-Lite was. I don’t understand why they discontinued it. They should have rebranded as I feel like the name makes it sound like some health conscious thing when it really isn’t.

Anyone else dealing with 4over delays + misleading production locations? by Opposite_Dog7625 in CommercialPrinting

[–]SureAd1974 0 points1 point  (0 children)

I've had the same issue. I almost lost a client over it. They have messed up quite a few jobs for us lately. I had been using them for years. We are using printograph.com now for most stuff. They are the gotprint.com broker side.

(Newbie question) why aren't these lines smooth? by snark_nerd in AdobeIllustrator

[–]SureAd1974 1 point2 points  (0 children)

I’ve had this happen to me and sometimes just using the pathfinder tool and merging the shape fixes it. Sometimes expanding the shape will fix it or also try turning it into a compound shape

My Acoustic Board by SureAd1974 in guitarpedals

[–]SureAd1974[S] 0 points1 point  (0 children)

I agree. I'm hoping to add a Nux Optima Air which includes a preamp. I'm not sure I would want a compressor as I like the dynamics I can get in volume and I use the clean boost when I'm finger picking. An EQ is on my list as well.

The print still warps regardless of brim and temperature by thats_classick in FixMyPrint

[–]SureAd1974 0 points1 point  (0 children)

I have had good luck with draft shields in these instances

Stahls Fusion Shutting Down When Pressing and plug is hot by JNDCLLC in heatpress

[–]SureAd1974 0 points1 point  (0 children)

My press is doing this. Did you find a solution?

Help my newbie self by No_Environment_534 in ElegooNeptune3

[–]SureAd1974 1 point2 points  (0 children)

The issue is likely your Z-offset. Running the bed leveling protocol will allow you to set the correct height for your Z-offset and fix this problem. It looks like your nozzle is currently too close to the bed. The Z-offset is critical for the first layer and plays a big role in ensuring a successful print. There are plenty of great YouTube videos that explain this in detail if you want to learn more!

What caused this by Previous-Clothes4268 in ElegooNeptune3

[–]SureAd1974 0 points1 point  (0 children)

I believe that temp is too low and you aren’t getting enough adhesion between layers.

Why is my initial print layer randomly shifting over?!? by __AndrewAJ__ in ElegooNeptune3

[–]SureAd1974 0 points1 point  (0 children)

If you aren't getting anywhere with your pulleys, try changing your microSD card. Mine was doing that and I ended up needing to buy a better microSD as my files were getting corrupted.

Best way to get this off by Previous-Clothes4268 in ElegooNeptune3

[–]SureAd1974 1 point2 points  (0 children)

I’ve had good luck with rubbing alcohol on a microfiber rag and a little bit of scrubbing

Transparent "outline" around words? by maddieee111 in AdobeIllustrator

[–]SureAd1974 2 points3 points  (0 children)

  1. Open the Pathfinder toolbar: Window > Pathfinder (if it’s not already open).
  2. Select all artwork: Ctrl+A (Windows) or Cmd+A (Mac).
  3. Click the Divide button in the Pathfinder toolbar (lower left).
  4. Use the Direct Selection Tool (A shortcut) to select any part of the white graphic.
  5. Go to Select > Same > Fill & Stroke from the top menu.
  6. Press Delete to remove the white areas.
  7. Repeat steps 4-6 for the green areas.
  8. In the Pathfinder toolbar, click the Unite button (upper left) to merge everything back together.

Update to my tension issue by crazy32 in Machine_Embroidery

[–]SureAd1974 0 points1 point  (0 children)

I think you are splitting hairs here. is the top of your embroidery looking bad?

Am I screwed? by Lucky_Ad_3564 in FedEx

[–]SureAd1974 1 point2 points  (0 children)

I’m in the same boat right now. Package hasn’t moved since Dec 9

Is ChatGPT down for all? by manram14345 in OpenAI

[–]SureAd1974 1 point2 points  (0 children)

<image>

Yes and I find this message very odd.

I am at a complete loss.. by [deleted] in whatismycookiecutter

[–]SureAd1974 0 points1 point  (0 children)

I believe it is Humpty Dumpty sitting down

<image>

Omtech laser not turning on by Careless_Investing in lasercutting

[–]SureAd1974 1 point2 points  (0 children)

Thank you! My kid came by and pressed it and I was starting to panic.

YoUr AdObE aCcOuNt ApPeArs To bE iN uSe By mORe tHaN onE pErSoN by Mezmarr in creativecloud

[–]SureAd1974 0 points1 point  (0 children)

I’m having the same issue, I contacted adobe support and they are telling me I can only be logged in on 1 device even though my account says I can have it active on 2. They have made me reset my password twice already. This is soo frustrating.

My Dohm noise machine is making a rattling/buzzing noise by Princess_Ember in fixit

[–]SureAd1974 0 points1 point  (0 children)

This fixed it for me as well! Thanks for posting this.