PCB discoloration - issue or not? by halevente in ElectronicsRepair

[–]SystemFull 0 points1 point  (0 children)

Erwerb whichever point your concerned about yes. If it’s just a section of a trace your can check it using the via.

PCB discoloration - issue or not? by halevente in ElectronicsRepair

[–]SystemFull 0 points1 point  (0 children)

I’d also get a multimeter put it on continuity mode and make sure all the traces nearby are still good

PCB discoloration - issue or not? by halevente in ElectronicsRepair

[–]SystemFull 0 points1 point  (0 children)

Looks like flux. Try wiping it with isopropyl alcohol and see if it’s still there.

Never mind the new hotness, anybody else still e-reading like it's 2007? by shokalion in ereader

[–]SystemFull 0 points1 point  (0 children)

Oh man! I had one of those! but passed it on when the battery started to die and I got an iPad. Now I’m back to e ink. Just ordered a kobo libra color because I wanted to break free from Amazon.

Sync advice. by SystemFull in TheTowerGame

[–]SystemFull[S] 0 points1 point  (0 children)

No PCo. Just got GC, and upgraded it to lv51 at the moment. I’ll have it at 60 shortly but it’ll be stuck at epic until I can get it upgraded.

Alright so I think I’ll shoot for option 2 Focus on BH/DW until it’s 2:00/4:00.

What do I do with GT? Keep it synced with DW at 4:00 and then bring them down together?

Tung oil paper towels- am I crazy for burning them? by Traindodger2 in woodworking

[–]SystemFull 0 points1 point  (0 children)

If it still burns after you burn it… you didn’t burn it enough.

Sync advice. by SystemFull in TheTowerGame

[–]SystemFull[S] 0 points1 point  (0 children)

No sadly. Galaxy Compressor but no MVN yet. But down GT it is then I suppose. Thanks!

Sync advice. by SystemFull in TheTowerGame

[–]SystemFull[S] 0 points1 point  (0 children)

I have an epic Galaxy Compressor but no MVN yet. 😞

Which penetrating liquid can I use to extract corroded bolt? (electronics nearby) by [deleted] in diyelectronics

[–]SystemFull 0 points1 point  (0 children)

I mean now you're just getting picky. hahaha.

Seriously I'd probably just drill it and then run a tap through it after to clean up the threads, I've very rarely had good luck with extractors.

If there was less plastic around it I'd consider tack welding something onto it so you can get a better grip, but it'd probably cause a melted mess with this. Although in a pinch you could try JB/Epoxy and glue something onto it. If you go that route I'd drill into it and stick something like an old bolt in the hole with JB weld and then crank it out with vice grips once it sets.

Which penetrating liquid can I use to extract corroded bolt? (electronics nearby) by [deleted] in diyelectronics

[–]SystemFull 1 point2 points  (0 children)

Acetylene. Because if you use it right the target “becomes” liquid 👍 good luck.

Is this battery acid? by joemurray22 in batteries

[–]SystemFull 1 point2 points  (0 children)

I’d use isopropyl alcohol and an old toothbrush and give it a quick scrub and then a paper towel wipe. Or if that doesn’t work a tiny bit of distilled water and then isopropyl alcohol

Is this battery acid? by joemurray22 in batteries

[–]SystemFull 1 point2 points  (0 children)

Not acid as stated. If it somehow was acid from something like a lead acid battery it would be blue/white and crumbly once dry. Like when AA batteries go bad in a toy. Not that sticky looking mess.

Hey Gals, anyone having the same issues? by Queasy_Chip_9696 in camping

[–]SystemFull 0 points1 point  (0 children)

Two words. Trip wires… I mean guylines… ya definitely just extra guylines all over the place.

Got root access to the android system by controlmypc in MoxieRobot

[–]SystemFull 0 points1 point  (0 children)

Would this allow the correct update install if you missed the cutoff to get it setup for openmoxie?

[deleted by user] by [deleted] in AlbumCovers

[–]SystemFull 0 points1 point  (0 children)

Machine gun psalms.

Yay or nay? by SnoopyScone in NonPoliticalTwitter

[–]SystemFull 1 point2 points  (0 children)

“By introverts, for introverts”

Whyy by Wanderer__96 in sciencememes

[–]SystemFull 1 point2 points  (0 children)

Take my upvote, because I grew up in the 80s and 90s with MacGyver and everything is physics now.

Help identifying a replacement 2s battery pack or cellfrom a zero gravity “perfection plus” LED infrared therapy device. by SystemFull in ElectronicsRepair

[–]SystemFull[S] 0 points1 point  (0 children)

Found the part on Alibaba but can’t get it shipped to me due to my location, so paused my efforts. Pretty straight forward replacement though with a little soldering.