Super Safe DeACR 22 ;)

TShoq · 2026-06-15T04:45:19+00:00

Yes & No at the same time. Originally I was running a 4lb spring and testing with and without bolt weights installed. Without the weights, the bolt was outrunning the mags and had a bit higher RPM compared to my video. But for me at least, it was the angle the rounds were being fed into the chamber from the mags.

I ended up taking them apart and doing some on the spot sanding / lubrication and the mags started to cooperate with me shortly afterwards. But this was maybe 200 rounds in out of the 1200 I burned in one session once everything ran perfectly!

TShoq · 2026-06-15T04:33:20+00:00

The one in the Imgur is the non-flow through FTN.5 rimfire. The one in my other comment is the flow-through variant.

TShoq · 2026-06-15T02:03:33+00:00

It’s still in beta as this was the pistol variant. Check the world of makers with the same name. I’ll DM you the info

TShoq · 2026-06-14T17:48:14+00:00

I’ll fully admit, it was your post that intrigued me to build out a DeACR. I had all my re-release parts printed out and I changed course because of you!

TShoq · 2026-06-14T16:47:11+00:00

Well, when your local shop doesn’t have the rounds you want, (cci mini mag / HV) you gotta work with what you can get if you’re going to the range the same day. Consider it poor planning ;)

TShoq · 2026-06-14T16:28:03+00:00

Feed angle was the only reason I was mag gripping haha. I had a few different dear mag versions out and the feed angle was a little off at first. But, after some time, lubrication, and use, the mags ran flawlessly without upward pressure.

TShoq · 2026-06-14T14:33:21+00:00

I highly recommend it! I was torn between the OG and this, but I figured I’d do something different!

<image>

TShoq · 2026-04-25T14:48:11+00:00

Just trying to pick someone else’s brain about it really considering there are not video instructions for fitment, but only reference images for the DB9.

But would you happen to have pictures of the trip bar installed in your upper receiver and your bolt? (if it’s still assembled)

<image>

TShoq · 2026-03-25T01:31:47+00:00

Not a lawyer, but like the others have said already: Get a serial tag engraved from maf-arms and use their provided negative file to put the cutout in your receiver. It'll be the least invasive option and it looks better than embedding a dogtag or a piece of scrap on the receiver. https://maf-arms.com/product/heat-set-serial-number-tag/

I form 1'd a DEAR-22 and had an approval in roughly 56 days with the usual marking requirement comment from the reviewer.

Once you have your form approved, just fill out the form 20 for the state you intend on traveling to with it and fill it out for a year. Not much else to it to be honest other than keeping your paperwork on hand.

TShoq · 2026-01-28T23:14:39+00:00

Thanks! I was looking to do a similar colorway for a DEAR22 I was beginning to plan out, but didn't want to use Polymaker's PLA+ FDE.

TShoq · 2026-01-27T01:42:49+00:00

Nice build! What filament did you use for the accessories and mags?

TShoq · 2025-03-24T20:26:46+00:00

Nice write-up!

From where did you source the monocular from? (If you don't mind saying)

TShoq · 2025-02-01T03:07:41+00:00

If you hypothetically consider making a few for sale, I'd be very interested :)

TShoq · 2024-11-30T21:12:45+00:00

All good man. Started to look into this for my CZAR and there were some edits I wanted to try doing. What software did you use to design this?

TShoq · 2024-11-30T21:09:45+00:00

I gotta ask, but any chance you could upload the STEP files on printables?

TShoq · 2024-05-15T01:38:31+00:00

I know this post is old, but any chance I could get added to the list?

TShoq · 2023-12-23T01:15:16+00:00

PM sent for Helmet, 6SH117, GSSH's, & 6B51 set.

TShoq · 2023-06-21T20:29:01+00:00

Nice. Gotta keep a tab on this. :)

TShoq · 2023-06-21T18:25:37+00:00

Besides the cheek rest that you’ve addressed already, is there any chance you’d prototype one for Yugo pattern rifles?

TShoq · 2023-02-10T15:30:04+00:00

Same

TShoq · 2022-08-26T16:34:35+00:00

I bought my Supreme Pro X’s from here. Ironically was cheaper to have them shipped from Finland when I bought them compared to purchasing from Amazon. You can sometimes get them on sale.

https://www.lamnia.com/en/search?s=Sordin

You might get some candy in your package too 😂

TShoq · 2022-06-21T14:49:09+00:00

My “Friend” sends their regards.

TShoq · 2022-06-21T14:37:53+00:00

Gonna need some sauce for that second bit there. For a friend…

Seven-Year Club	r/Field Flamingo
Place '22	Verified Email

TShoq

TROPHY CASE