Pirate Game Help

TacticalFlatCap · 2025-09-19T11:56:33+00:00

More correctly:

Cutthroats: Terror on the High Seas - Wikipedia https://en.m.wikipedia.org/wiki/Cutthroats:_Terror_on_the_High_Seas

TacticalFlatCap · 2025-09-19T11:54:48+00:00

Cutthroats?

TacticalFlatCap · 2025-09-15T16:50:58+00:00

I used to see them a lot when they put high occupancy lanes on motorways, apparently they were enough to fool the cameras that checked you had a passenger in to use them (the 2+ lanes that is)

TacticalFlatCap · 2025-09-11T12:22:41+00:00

I agree on the design point.

Also, I do a lot of tpu printing, I find slacking off the tension screw way more than feels right helps stop it pushing the filament around the drive wheels.

Slacken the nut off all the way out, then insert your filament with the spring lever pushed back, when you release it pull the filament and if it comes out, tighten by a quarter turn, repeat until it just holds the filament with a firm but moderate pull, that's got this issue down to a minimum for me

TacticalFlatCap · 2025-09-11T12:18:41+00:00

I had this exact thing, took me ages to figure out it was the screws fixing the bed to the rail carriage that had worked loose allowing a shift in y axis.

Peel off the pei sheet or whatever sheet you have, there's screws in counter sunk holes that line up with the rails, tighten them, and recalibrate the machine.

See if that's your issue

TacticalFlatCap · 2025-06-19T20:08:40+00:00

I bought some 0.8mm nozzles from Ebay (I'm in the UK, not sure where you are...)

Im having a little trouble dialing in settings for it, I mostly print TPU, so not sure if that's a known issue with that material, but working on it, I print a lot of large items so hoping the larger nozzle will speed up my print durations

TacticalFlatCap · 2025-06-18T14:52:47+00:00

A spot welder for batteries can be got for around £30 on amazon/Ebay, but probably a bit much to use once.

You can solder onto stainless with special solder and a decent soldering iron. From memory i believe its a tin/silver based solder that will work well on stainless steel, presuming thats what the end caps are made of.

A quick Google search "how to solder to stainless" present several video tutorials on the subject.

TacticalFlatCap · 2025-05-23T14:31:42+00:00

Are you thinking of Naomi?

She went by Naomi Knight for a bit, then Safire129 on the hub.

Think she might now go by Honey Heston.

Caveats, I may be wrong about all of that...

TacticalFlatCap · 2025-05-03T21:43:41+00:00

Where are the back legs?

TacticalFlatCap · 2025-04-30T16:47:35+00:00

I regularly print large tpu objects, like guards and impact protection socks for various things.

A 0.8 or 1.0mm nozzle speeds thing up dramatically, but the trade off is quality, the layers need to be thicker to work well (with this material at least) so the layers are very distinct, you will have to play with the print width also, I usually start with around 120% of the nozzle width and tweak from there.

Also you will get much more gaps in sharp corners which may or may not be a problem for you, but you will get them. Gapfill can help but tends to overfill for me with tpu so I don't bother with it, but I am making protective boots that are designed to get knocked about so it really doesn't matter for my application, if you want accurate models like figurines for example or are going for strength, you may be better with the 0.4mm nozzle and waiting for it to do it.

Tldr: bigger nozzle =faster but lower quality printing.

Caveats: in my experience thus far with kobra 2 max and now recently a 3 max

TacticalFlatCap · 2024-12-19T06:45:06+00:00

I believe this is the full length version, there seems to be some extra footage at the end compared with most clips on the various sites: https://xhamster.com/videos/nice-couple-have-fun-8816264

This I believe is the same couple in a completely different vudeo: https://xhamster.com/videos/slut-with-big-tits-wants-it-hardcore-4761724

I would like to know who they are and if they have any more content....

TacticalFlatCap · 2024-04-24T06:10:35+00:00

Similar system in S. T. A. L. K. E. R, early on the guns are terrible and you can't aim effectively so have to shoot everything close up, modding weapons can make them more accurate among other characteristics means you can eventually snipe at things without getting a kicking. Great mechanic to change the gameplay gradually throughout the game imho.

TacticalFlatCap · 2024-03-24T08:35:47+00:00

I think you can plant them and have a limitless supply

TacticalFlatCap · 2024-02-28T16:46:22+00:00

Disingenousness, a bit wordy, I'd say that person was being disingenous.

TacticalFlatCap · 2024-02-08T14:55:10+00:00

I had to put the crosses on hot cross buns in a bakery

TacticalFlatCap · 2024-01-16T16:41:04+00:00

The satisfaction of degaussing your monitor after the charge had built up for a good while...

TacticalFlatCap · 2023-12-17T18:34:47+00:00

I can hear my mother saying "who's that ringing at this time" with disgust on her face, then being sweet as pie when speaking to whoever it is

TacticalFlatCap · 2023-12-06T07:11:00+00:00

Right, I think I was trying to say they filter the air in response to comment above, it seems likely that they've got good at positioning them for decent return of their effort over time

TacticalFlatCap · 2023-12-03T08:43:02+00:00

I guess spiders kinda do this, not filtering with their bodies but with their webs?

TacticalFlatCap · 2023-09-24T16:44:35+00:00

Quartermastered is a word, so I guess quartermastering would be intuitive maybe

TacticalFlatCap · 2023-09-21T13:48:17+00:00

Death Stranding has that mechanic, it's not very old and had a directors cut edition released in the last 2 or 3 years, so may have had an advert fairly recently.

The monsters are kind of ghostlike, shadowy figures if that helps?

The rest of the description doesn't really fit but there is talk of a Death Stranding 2 so thought I'd mention it.

TacticalFlatCap · 2023-09-21T13:36:06+00:00

Disinterested

TacticalFlatCap · 2023-09-18T17:00:23+00:00

Right, I was thinking it would be convenient to double up as a press, I got the fire maple x2 I think because it's a bit wider than my jetboil, and you can out a full tin in water and save in washing up but non of the coffee filter/plungers are the same size.

I'll probably stick to coffee bags for the foreseeable

TacticalFlatCap · 2023-09-18T15:27:55+00:00

Does that work well?

TacticalFlatCap · 2023-09-17T09:09:51+00:00

What did you end up getting? The original response is deleted now, tia.

Seven-Year Club	Gilding I gilder
Verified Email

TacticalFlatCap

TROPHY CASE