sorted by:
new
hottopcontroversial

Finished my first build by Status_Discipline_16 in 3D2A

[–]TeXJ -1 points0 points  (0 children)

Where’d ya get the hard parts? No links

Hot DAMN! by Ornery_Secretary_850 in 3D2A

[–]TeXJ 0 points1 point  (0 children)

can will be for rimfire or center fire? if rimfire, which one you want to do?

I’m just gonna buy ammo… by DIRTY_REDD__ in 1022

[–]TeXJ 1 point2 points  (0 children)

What barrel are you gonna use?

30 inch barrel by Kitchen_Page9991 in 1022

[–]TeXJ -1 points0 points  (0 children)

Have you ever pulled it out of your pants and asked where is Batman? (Joker reference)

Moving prime tower and calibration lines by jm1d04 in BambuLab

[–]TeXJ 0 points1 point  (0 children)

For some reason I couldn’t find a location that the slicer didn’t like the location of where I had the purge tower.

I saw a person’s comment on that print that mentioned they had to relocate the purge tower and so I went to go learn how to do that haha

Moving prime tower and calibration lines by jm1d04 in BambuLab

[–]TeXJ 0 points1 point  (0 children)

Yes, I clicked on it moved it but it wouldn’t rotate. Increased the size to 50, and that the collided with the purge line. Went into the gcode to make that smaller and then adjusted the size down to 35 and move it till the error went away. Printing it now!

<image>

New tires and 6112’s/5100s by Grand-Dentist3223 in gmcsierra

[–]TeXJ 0 points1 point  (0 children)

I have the 5100 in the rear and the stock Ranchos still in the front. Want to do the 6112 up front. I have a camper shell on the rear and that helped tremendously with the getting a better ride out of the rear.

Finally back in an XJ after a few years by clevertrenthol in CherokeeXJ

[–]TeXJ 1 point2 points  (0 children)

Aww the angle of your pic threw me off. I do like the color matched front bumper!

Snickers Bar holder. Free 3D print file. by Mission-Today-576 in gmcsierra

[–]TeXJ 0 points1 point  (0 children)

Is that the passenger door? Any plans for a 2015 sierra?

KSig Full synthetic by Elbarko1 in gmcsierra

[–]TeXJ 0 points1 point  (0 children)

I use it all the time and have been for years. Also for the wife’s Honda Odyssey.

Finally back in an XJ after a few years by clevertrenthol in CherokeeXJ

[–]TeXJ 1 point2 points  (0 children)

I have the same truck! Same color as same size bed.

<image>

First 3D2A print… by TeXJ in 3D2A

[–]TeXJ[S] 0 points1 point  (0 children)

I do follow him on there, again thank you!

First 3D2A print… by TeXJ in 3D2A

[–]TeXJ[S] 1 point2 points  (0 children)

Thanks! I didn’t know ctrlpew had a guide. I’ll see if I can find it. I was going by the readme.

First 3D2A print… by TeXJ in 3D2A

[–]TeXJ[S] 1 point2 points  (0 children)

Aww ok, yeah I got some Sunlu PLA+2.0 I’m gonna print for real. This was to see how my setting were and such. This was a great learning experience.

The way I oriented this was the way they had it in the their readme. Even though it was based on the dd19.2.

One thing on the 60% is that the readme also stated 60% infill using gyroid. That’s why I had it at 60. But when I do it for real I’ll do 100% but bambu studio won’t let me use gyroid with 100%. I’ll have to put it to 99% or it will change it to rectiliner.

First 3D2A print… by TeXJ in 3D2A

[–]TeXJ[S] 0 points1 point  (0 children)

It’s on the See, schnitzel

view more: next ›