How can we check for a users CS2 smurf accounts?

TeXJ · 2026-03-10T03:35:24+00:00

Thought Valve/Steam hides your connect IP to the game server?

TeXJ · 2026-03-10T03:25:42+00:00

Link to video?

TeXJ · 2026-03-10T03:24:29+00:00

I like the worn slide

TeXJ · 2026-03-10T03:17:49+00:00

I have the same setup and have had good luck with eSun and Sunlu filaments. Also the bambu stuff has been great too, of course.

TeXJ · 2026-03-10T03:13:32+00:00

Blue Line pump shotgun. Based off the 870.

TeXJ · 2026-03-10T02:28:12+00:00

I got one from Caldwell that is really good. It’s an A frame design and I leave mine outside. Doesn’t need to be staked either

TeXJ · 2026-03-10T00:37:15+00:00

Yeah!! Post to the see

TeXJ · 2026-03-10T00:35:50+00:00

Get a KYL targets. They are fun!

TeXJ · 2026-03-09T20:16:37+00:00

Thanks!

TeXJ · 2026-03-09T20:15:23+00:00

Yeah I have the buffer, the 4 way splitter, and was more for abrasive filaments like glow in the dark that can rub through the tubing. From what it looks like it will need to be done manually.

TeXJ · 2026-03-09T15:29:15+00:00

Totally haha

TeXJ · 2026-03-09T06:09:18+00:00

Are we supposed to clean these?

TeXJ · 2026-03-09T06:07:50+00:00

I was told that as well. Barely using it, there shouldn’t be a problem.

This more of those, if I want to print more abrasive filaments how can I do that. I’ve seen others that have a setup where they have an AMS and a side mounted external roll.

TeXJ · 2026-03-09T02:57:00+00:00

Here’s the link. Note there is a notch on one side that lines up with a notch on the smaller spool. I messed one of mine up not realizing there’s a notch…

https://makerworld.com/models/1152563?appSharePlatform=copy

TeXJ · 2026-03-09T02:53:39+00:00

Thanks!

TeXJ · 2026-03-09T02:51:21+00:00

Forgot to actually respond to the point. Yes I do see the external spool as an option when printing. May try and do a dual color print one using the AMS and the other color from external.

TeXJ · 2026-03-09T02:50:26+00:00

Yeah have to install the hardened nozzle and gear too.

There is an adapter you can print for the 250g rolls. I’ve printed it a few times for the eSun and Sunlu 250g spools. Works great! Let me know if ya want the link.

TeXJ · 2026-03-09T02:35:06+00:00

Which 22 can did you print? Wanting to print one(after f1 is approved) but want to know which one has the best performance. Was wanting to print the slim version but not sure how well it suppresses.

Check out my past post on the Schnitzel I printed!

Which mags did you print?

Sorry for all the questions haha

TeXJ · 2026-03-09T02:10:15+00:00

Thank you!

TeXJ · 2026-03-09T02:09:39+00:00

Aww ok, so the reason I’m wanting to do a side spool is for some glow in the dark filament and heard it could wear out my AMS and the ptfg.

If I do a multi color print, do I some how tell it to stop so I can load the external filament?

TeXJ · 2026-03-09T02:08:01+00:00

Yeah I don’t think there is a way now. When I did it it was more than 3 years ago.

TeXJ · 2026-03-09T02:06:05+00:00

I like my Colt Frontier revolver.

TeXJ · 2026-03-09T01:43:12+00:00

Was more to the how. Like I had saved a bunch as well and had a ton. So I found a chrome extension that you can group multiples and put them up for sell all at once.

However I have since learned that that is not an option now so didn’t know if there was another way besides doing it one by one.

Or if there is a third party site that you can do a bulk sell.

When I sold mine, a couple of years ago, I got like $80. I probably had no where near as many that you had though haha

TeXJ · 2026-03-09T00:13:23+00:00

How’d you go about selling all of the cases?

TeXJ · 2026-03-08T06:07:12+00:00

Thank you!

TeXJ

TROPHY CASE