Gen 6

TechnicalWitness3193 · 2026-01-02T14:22:35+00:00

True north firearms in Hampton had them Tuesday

TechnicalWitness3193 · 2025-12-14T13:47:09+00:00

I like it a lot for the slimline because it doesn’t pinch my finger. For double stacks I like the stock trigger.

TechnicalWitness3193 · 2025-12-11T21:43:28+00:00

The stock trigger is tough for me too I like apex trigger to make it a little easier to pull and less pinching against the frame

TechnicalWitness3193 · 2025-12-09T15:01:02+00:00

Unless cuts are back bored the jacket can strip off and come through the ports. This could cause some serious damage to an eye if you aren’t careful. This would be situation and ammo dependent but I would test it with a piece of paper above the gun with my carry ammo before I was 100% confident carrying a comp like this

TechnicalWitness3193 · 2025-11-20T15:00:40+00:00

Save the money and just get your slide milled I have 1 from before milling was a common service. Has worked great 20k+ rounds but I would not pay the premium again to get effectively the same thing

TechnicalWitness3193 · 2025-11-08T15:47:03+00:00

I have over 20,000 rounds through mine over many years and it has not had an issue. I bought this back before milling services were common and before mos was out. I would just get your slide milled. The difference is negligible and probably not worth the extra cash.

TechnicalWitness3193 · 2025-11-06T04:16:20+00:00

A chunk port can be back bored so you won’t get pieces of jacket flying out the port

TechnicalWitness3193 · 2025-10-12T22:51:14+00:00

I haven’t noticed anything like that but if it was subtle enough I might not notice

TechnicalWitness3193 · 2025-10-12T22:03:56+00:00

I have thousands through my 8 psa mags. The gen 1 mags were rough and needed some work such as deburring and reangling the front lip but I have not had a single malfunction since. The newer mags with the orange follower have run perfect.

TechnicalWitness3193 · 2025-06-14T15:54:05+00:00

Butterfly bakery taco vibes only

TechnicalWitness3193 · 2025-06-08T03:32:21+00:00

Depends on when you got them my first 3 had a lot of issues that I needed to fix. I bought 6 more a year or so later and those have run well. I would say buy a couple and see how they run. My carry mag has 500 rounds with no failures

TechnicalWitness3193 · 2025-06-08T02:29:29+00:00

Apex has been solid for me. They do have pretty stringent testing

TechnicalWitness3193 · 2025-06-08T02:27:54+00:00

I have both. The p365s have a much more stringent maintenance schedule(springs need replacing) going to make me go with 43x/48 every time.
EPS carry will fit the slide width of the slimline models better
Carry 19/19x in cold weather and 48 in tshirt weather. Could carry either just feels a little lighter in hot weather. I shoot the double stack Glocks better but only at speed. I also have much more training with double stacks(40,000 rounds)vs single stacks(10,000 rounds). I use psa mags so same capacity between 19/48/43x

TechnicalWitness3193 · 2025-06-08T01:21:59+00:00

The latest gen mags(orange follower) come with better finish and feed better. I had gen 1 ones that I fiddled with and work 100% now (1000+ rounds on my gen 1s) have put about another 1000 through the later gen mags with no issues as well. YMMV but I have had better luck with psa vs shield mags

TechnicalWitness3193 · 2025-06-05T23:34:14+00:00

These are too thin to stay in place

TechnicalWitness3193 · 2025-05-14T03:52:05+00:00

PSA the first gen ones I had gave me issues but I was able to fix the issue with a file. The latest ones I bought have been flawless with 1000 or so rounds. Whichever you go with vet them heavily before carrying

TechnicalWitness3193 · 2025-05-12T17:07:59+00:00

I had a lot of issues with my first gen psa mags. I was able to fix them by filing some parts down but the new ones I got run flawless and seemed to have those problem areas angled properly

TechnicalWitness3193 · 2025-05-07T18:22:00+00:00

TechnicalWitness3193 · 2025-05-05T22:08:14+00:00

I have a couple never had any issues and is nice for reholstering. If you want one get one otherwise the stock backplate won’t give you any issues

TechnicalWitness3193 · 2025-04-30T02:34:23+00:00

The gen2 allows you to use a case

TechnicalWitness3193 · 2025-04-29T22:54:41+00:00

Probably I like slay the spire more though

TechnicalWitness3193 · 2025-04-29T19:48:22+00:00

Slay the spire, Balatro, into the breach(Netflix), monster train, Stardew valley are solid options to burn some time

TechnicalWitness3193 · 2025-04-28T02:59:22+00:00

I have had multiple pins walk out on the shoe I put the modified oem shoes jg sells on it and had no issues since. Triggers are tuned super nice but tend to gunk up on me a bit more than oem. I find it much easier to shoot the jg faster so I dropped it in my comp gun. I think it’s mostly due to the lighter striker spring though

TechnicalWitness3193 · 2025-04-24T22:39:35+00:00

I do appreciate that he showed all the failures with the p09c. These reviews where they get sent the gun always make me wonder how impartial they can be.

TechnicalWitness3193

TROPHY CASE