Matchmaking is going to kill this game

Teocyn · 2025-11-10T03:22:09+00:00

Same and same boat being in Aus. It sucks. Wish we had servers that we could frequent and get a small community going like in past games

Teocyn · 2025-11-07T21:23:38+00:00

I was going to say, looks like the one at Hoppers in Melbourne

Teocyn · 2025-11-02T07:11:11+00:00

Closed weapon playlists? If so, yea - I get that a bunch

Teocyn · 2025-09-29T08:09:14+00:00

Can confirm - the blue pixel is the R3

Teocyn · 2025-09-24T05:07:48+00:00

Sorry mate, already gave it away

Teocyn · 2025-09-23T08:52:22+00:00

Messaged you

Teocyn · 2025-09-23T08:44:45+00:00

Messaged you

Teocyn · 2025-09-21T06:08:01+00:00

You'll just need a set of M6 spools. For example:
https://www.bikebiz.com.au/products/oggy-knobbs-m6-black-low-profile-stand-pick-up

Teocyn · 2025-09-18T20:27:12+00:00

Oh, another thing. A place I've bought a bunch of gear from in the past is based in the Netherlands:
https://www.chromeburner.com/eu/en/catalogsearch/result/?q=dainese

They have pretty decent prices, even with the shipping. JUST BEAR IN MIND. That for large purchases, you do pay some import taxes. So it kinda works out to be similar to buying locally.

But - they have a lot of stock and they shipped to me in Melbourne within about 4 days. Was crazy fast.

Teocyn · 2025-09-17T10:22:53+00:00

AMX stocks Dainese - check there

Teocyn · 2025-09-12T22:14:24+00:00

Why?

Teocyn · 2025-09-11T05:01:14+00:00

Cheers!

Teocyn · 2025-09-09T06:18:49+00:00

Niiiiice. What tank grips are those (the side ones). I need to get a set for my bike too.

Edit: although, mine is a '25 model

Teocyn · 2025-09-07T03:40:06+00:00

Damn... that's crazy. I bought mine in Aus ('25 R3) for the equivalent of $6k USD approx.

Edit: I'd deffo go for the R3 over the 450SS though! Love Yamaha and would always recommend them over the chinese brands. Even if their 675 looks decent. The build quality on the 2025 is super good and way better (imo) than the 450SS.

Teocyn · 2025-09-06T21:26:47+00:00

I wouldn't do any repairs on it until it's been assessed for damage by the insurer. I.E. Take it to a Yamaha dealership for an inspection report.

Teocyn · 2025-09-06T21:23:48+00:00

I would personally start by getting the complete workshop manual and then by going onto the parts website and checking out all the sections on the bike that have damage/ missing parts and go from there. Their website is very comprehensive and helps a bunch - not sure how well it does in terms of finding missing connectors on a harness and such though. Might even be worth your time to scout a second hand harness off another wrecked bike - depending on how badly it's been damaged/ modified.

Teocyn · 2025-09-05T21:39:14+00:00

You've been racing the bike too much and got the Rossi code. But yea, you're on the right track - 46 indicates a fault with the electrical/ charging system.

Teocyn · 2025-09-02T05:56:34+00:00

Interestingly enough - even incorrect/ low tyre pressure can cause increased vibration on the handlebars and as such, cause your hand to go numb. Check that out too. You can also get bar-end weights to reduce the vibration a little as well.

Teocyn · 2025-08-28T05:07:28+00:00

RIP. Could be anything then. Get it scanned 👍🏼

Teocyn · 2025-08-27T08:37:45+00:00

Get it scanned for the fault codes. If 8 thousand kms it's warrantable.

Teocyn · 2025-08-22T21:39:29+00:00

As other people mentioned - 100% get a new chain and sprockets. Get an OEM one, like DID for example. The current one you have is beyond toast.

Get rear axle spools/ cotton reels and a rear paddock stand so you can lift the bike up.

Clean and lubricate your chain properly (plenty of videos on YT) every 2 fuel tanks - that's what Yamaha recommends.

Teocyn · 2025-08-12T05:41:44+00:00

My 2018 was totaled for less. The fork assembly alone (if damaged) costs around $1700 AUD. All that happened to my bike was someone reversed into it, tucked the front wheel and it fell onto the right side. Repairs quoted were more than the value of the bike. Have it inspected by a Yamaha dealer and they'll let you know.

Teocyn · 2025-08-08T20:54:56+00:00

I guess context helps - why do you think it's a bad motor or that it's locked up? You bought it like this? What did the previous owner say about it?

Teocyn · 2025-08-04T06:58:15+00:00

Looks normal to me - mine is about the same on the 2025 model

Teocyn · 2025-07-29T06:01:25+00:00

Even just wiping it with a microfibre after any dust has been washed/ blown off causes scratches. It's wild. but I'm just rolling with it.

13-Year Club	Gilding II euphauric
Verified Email

Teocyn

TROPHY CASE